Your cart is empty.
Your cart is empty.FLIR ONE PRO for iOS (USB-C) with MSX and 160 x 120 Resolution
WJAF
Reviewed in the United States on March 2, 2025
I'm sure this product works great, but I made a mistake when purchasing—so be sure to read the details carefully. I have an Apple i phone 16" with a USB-C port and bought a FLIR camera, assuming "Apple compatible" meant it would work. It doesn't. Then, I purchased a USB-C charger adapter but didn't get one that supports OTG. Now, I have two options: buy a Lightning-to-USB-C adapter that is OTG compatible or contact FLIR to exchange it for the correct thermal camera. Read the fine print!
crws
Reviewed in the United States on February 24, 2025
I trained and certified on $10k FLIR T530 equipment, and I have to say that this FLIR Pro LT model (iPhone Lightning) does exceptionally well for what it is designed to do.As the mantra goes- in IR, it is all about Focus, Focus, Focus.Aligning the visible light camera depending on your distance yields marked improvement in your scans, as does maintaining a consistent distance and blocking of your own heat signature on your target.The fact that this device is self powered means you can tether and position the equipment to further avoid reflective degradation of your target due to emissivity issues.I was skeptical of the performance to cost ratio, but I liked the results of the iPhone Lightning Pro LT model so much, I upgraded to the full Pro.The battery life is no mystery- FLIR fully discloses this in the user manual. 45 minutes to 1 hour of scan time.I've included a T530 scan, and 3 others from the LT.Happy Scanning!
Daniel
Reviewed in the United States on April 26, 2025
Easy to use flir app works great. Good picture easy to save photos..
ChrisD
Reviewed in the United States on April 12, 2025
Fabulous device with great features built in. The only connection between it and your phone being the connector makes it a bit delicate and cumbersome to use, but it works well as long as you are cautious. Some aftermarket connection adapters, developed for specific phone models, might allow for a more robust connection for users that require a more robust design due to extensive use or challenging environment.
mhosk
Reviewed in the United States on April 12, 2025
Works great
Danny Baert
Reviewed in Belgium on October 13, 2024
Gebruik deze om warmte verspilling op te sporen in huis en voor waterlekkage onder betegeling.Zeker een aanrader.Gr.
Marcus
Reviewed in Brazil on April 2, 2024
Ótima escolha! Bastante prática
SFさん
Reviewed in Japan on July 22, 2023
LT版からのアップデートとして購入・LT版との違いについてざっくりですが、ノーマル版とLT版の違いとして熱画像解像度が 80 ×60[LT版] から160x120へ対象物温度範囲が -20°C -120°C[LT版] から-20°C-120°C および 0°C-400°C へ範囲がアップと言うのがメインの違いです。細かくは、水平視野角が増えていたりしますので、撮影の際に同じ距離から撮影するとLT版の方がやや狭くなります。この差で、おおよそ1万円ほどの差が発生しています。結論から言えば、個人使用としては、LT版でも十分です。また、FLIRのサーマル機の売りであるMSXを使用して撮影するのであれば、LT版とノーマル版の違いは結構感じずらいものになっています。以下はその理由ですが、長く分かりずらい内容なので、どうでもいい人は、読み飛ばしてください。一見すると熱解像度が2倍になっているのでかなりの差がある雰囲気ですが、これは熱解像度がそのままでるサーマルオンリーの画像表示時であれば差がはっきりするのですが、MSXなどの通常光学映像とのMIX状態時は通常光学画像側の映像で、サーマル側の解像度の差がわかりにくくなり、結果としてぱっと見、見分けがつきにくいです。また、光学画像側の解像度はどちらも1440x1080となっておりこれにサーマル画像をアップコンバートして、合成するので引き伸ばされた映像となり、雑い計算であればLT版がおよそ18倍、ノーマル版が9倍となり数値的には差があるものの2から３倍程度での引き伸ばしであれば、差がを感じることができるかもですが、ここまで引き伸ばし率が高いと、どんぐりの背比べとなりまた上記で記載したとおり、MSX画像の場合、通常光学のエッジ部分が合成されるため、この高い引き伸ばし率で差がぼやけているところに重なるため、結果としてサーマル単体画像以外では、その差を感じることが難しくなっている。本製品の意図としても手軽に使用を考えれば、LT版でも十分と言えるかと思います。・LT版との棲み分け方法棲み分けとしては、温度の見地幅として 200°C以上が発生するまた、200°C以上をある程度、計測したいのであれば、ノーマル版となり特に大きくこだわりがないのであれば、LT版でOKかな？と思います。・留意点として上記で記載したMSXの画像差が数字ほど大きくない点以外に使用していると、温度のキャリブレーションが使用していると発生するのですが、このキャリブレーション発生間隔が、LT版の方が多い気がする（これはあくまで感覚としてで、実際に計測・比較したわけではない)どちらも共通として、映像全体がそこそこ動くものの計測は向かない理由としては、わかりやすいfpsがおおよそ8fpsほどしかないので映像全体がごりごり変動するものとなると、映像トビが発生しやすいなどがあります。・総評としてMSXではLT版と比較しても差が感じずらいものの、サーマル画像のみであれば差をしっかりと感じれるので、MSXの使用予定がないのであれば、LT版よりは断然おすすめと言える。追加購入やLT版をすでに持っていてアップデートするのでれば、その時の価格と予算次第で選んで良いかと思います
buyer
Reviewed in the United States on October 22, 2021
Thrilled with the performance of this camera using the free flir app (also excellent) on android. I do electronic ckt and PCB design and primarily use it with my phone (pixel 3A) to image PCBs for thermal analysis. It views in real time and optionally detects the hottest (and/or coldest) spot, and can also be configured with a few other (reposition-able) spots to report the specific temperatures at those points. Displayed temp values update very rapidly (seems around 10 times per sec or so). Saved images are saved as readily viewable .JPG files, but those files also invisibly include all the thermal data for every pixel in the image. These images can be further analyzed on a PC using the "FLIR tools" app (downloaded free from FLIR). In that app the image color scheme and range can be scaled/changed. You can display spot temps, average or peak or minimum temps within user defined regions.I generally use the camera at a distance of around 6 inches and get fine results. The only downside I've noticed when using it that close is that the optical image overlay on the thermal image does not align very well, so I just disable that feature.Quick start usage guide (for android):Charge the camera. (must be charged using it's USB-C charging jack - does not get charged at all from phone)Download/install the Flir phone app on google play.Optionally download Flir Tools (PC app) from FLIR website. Camera works without this, but allows later analysis of saved images. You might need to provide your proof of purchase details to download.Before plugging the (charged) camera into the phone, first turn it on by pressing the button on bottom of camera. LED in button will light. Not sure if this is just with mine, but the button doesn't seem to depress when pushed, but just the pressure of my finger on the button turns it on.Once on, now plug it onto the phone. Note that the knob behind the USB plug can be turned to adjust the length of the plug to fit a recessed USB port due to a phone case.The (previously downloaded) app should automatically start within a few secs of when the camera is plugged in. If it doesn't automatically start, open the app directly.The camera views the scene in real time, and snapshot images are saved to your phone just as normal photos. They can be transferred (as JPG) to your PC via the normal methods (email, USB, etc) where they can be further viewed, analyzed, printed using the Flir Tools app.
L., Christian
Reviewed in Germany on January 9, 2019
Zunächst einmal eine wichtige Info: Das Gerät (Stand 09.01.19) funktioniert mit einem Samsung Galaxy Note 8 (Android 8) einwandfrei. Bevor ich die WBK an den USB-C Anschluss anstecke, schalte ich die Kamera ein und warte, bis die Status-LED von orange durchgehend leuchtend auf grün blinkend wechselt. Dann erst schließe ich die Kamera bei gestarteter App an das Smartphone. Funktioniert immer auf Anhieb ohne Probleme. Der Hinweis in der Produktbeschreibung ist für mich zumindest für das Note 8 betreffend nicht erklärbar ("HINWEIS - Nicht kompatibel mit Samsung S8, Samsung S9, Samsung Note 8....")Die Qualität ist für diesen Preis sensationell, die Auflösung absolut ausreichend (Dank MSX Darstellung erfreulich detailreich) und die Genauigkeit ist ok. Wenn ich an einigen Punkten mit meinem IR Thermometer nachmesse, gibt es leichte Abweichungen, ABER: Es handelt sich hier um eine WBK der Einsteiger-Klasse, die dafür konzipiert ist, Temperaturunterschiede mit gewissen Toleranzen darzustellen. Für Freunde der genauer Messungen empfehle ich kalibrierbare WBK's in der Preisklasse ab 2.500 Euro.In unserem gemieteten Haus hat diese Kamera blitzschnell erhebliche Kältebrücken gefunden, aus denen sich der Vermieter mit den gelobten Worten "Sie haben aber nicht richtig gelüftet" leider nicht mehr herauswinden kann. Ein sehr schönes Feature ist, dass man nachträglich Temperatur-Messungen an den erstellten Thermografien durchführen kann. Somit kann ich bequem nach erfolgter Aufnahme der Thermografien die Messungen an den interessanten Punkten durchführen.Die Verpackung ist wertig (sogar trotz Warehouse Deal ordentlich verpackt und ordentlich von Amazon deklariert!) und es wird noch ein kleines Etui für den Transport sowie ein USB-C Kabel mitgeliefert.Für mich auch in der Zukunft ein unverzichtbarer Helfer.
Daniel hodgson
Reviewed in the United Kingdom on April 27, 2018
So far I am very impressed with this product. I did my research before as it was an expensive purchase and I am glad I went with this one. I have used other thermal cameras in the past and have not been impressed but the quality of the images on this unit is very impressive. I think the stand out feature is the face it blends a actual picture with a thermal image so you keep the importance information like labeling on a fuse board. I am impressed by the accuracy of the temperature and the fact you can make changes to the image after the photo has been taken allowing you today choose the best colour setting or move the temperature point.It's expensive bit of kit but when you compare it to the equivalent spec camera it's actually quite cheap. For this kind of price you wouldn't be getting very good images.I have highy expect this will be getting lots of uses at work been an electrician both diagnosis of faults and when doing electrical safety checks and will make use stand out from the others not using this technology.Also a nice added point is the USB c connection is extendable so it fits on even with my large case something I was concerned about before purchasing.
Recommended Products
$8.00
$ 3 .99 $3.99