Shopping Cart

Your cart is empty.

Your cart is empty.

for Tesla Model Y 2020-2024 TPU PPF HD Clear Paint Protective Film Custom Fit Anti Scratch Self Healing Shield Guard with Install Kit Tesla Finishing Accessories for Bumper Headlight 6Pcs

Free shipping on orders over $29.99

$87.99

$ 36 .99 $36.99

In Stock

About this item

  • 【Tailored】: Customized for Tesla model Y 2020-2024.This option includes the front bumper and headlights. A flawless, high-gloss paint surface is a point of pride for many car owners.Accessory kit included waterproof instruction manual,spray bottle,high fiber towel,felt squeegees,utility knife and magnetic holder
  • 【Car Care Essentials】:Protect your Model Y's paint from wear and tear Headlight film also slows down surface deterioration. With Headlight Protection from Paintville your Tesla's lights will be able to shine bright for years to come
  • 【About TPU】:8.5 mils thickness. Combines the physical durability of plastics and the flexibility of rubber. It maintains high strength and elasticity across a wide temperature range, boasting excellent optical clarity and resistance to yellowing.The films shield paintwork from scratches, swirl marks, UV rays and acid rain for 5-10 years, and even facilitate self-healing of minor blemishes and defects over time
  • 【About Installing】: ① Clean the car and then dry with a clean towel. Make sure to remove dirt and grease. ② Create a slip solution by mixing approximately 15% neutral detergent and 85% water in a spray bottle . And make sure the solution is mixed. ③ Spray the mounting area and front of the film , then remove the film from the backing and spray the backside . ④Using magnetic holder to assist with installation. ⑤ Use the squeegee to remove any air bubbles between the film and paint
  • 【Note】:①、Do not allow any portion of the film to hang off the edge of the vehicle.②、If you accidentally get sand, gravel, or dust during installation, you can rinse it off by spraying it with a lubricant.③、 Spray enough slip solution as needed, and you can push lightly with your fingers to align the film with the mounting location. ④、The LH and RH film pieces are not interchangeable; the sticky backing should be applied to the paint of the car and follow the contour of the body
  • NOTE BEFORE PURCHASE: ①、 In order to avoid installation deviation, there is no pre-cutting for trailer hitch/sensor/logo location. Please use a hobby knife to trim after installation. ②、TPU material can support up to 10% stretching, if required during installation



Product Description


BabyJo
Reviewed in the United States on May 20, 2025
Don’t waste your time and money. Even after making cuts to allow the film to overlap it doesn’t stick and bubbles all over. Absolutely does not fit.
SSS
Reviewed in the United States on May 2, 2025
Discription is not acurate and it won't fit to my Tesla Model Y 2023. Product quality is very poor. I do not wont to give even 1 star, but is not allowed me. Please do not purchase this product and waste your money.
C. NoFu
Reviewed in the United States on February 27, 2025
Little off on the cut, but in the end still does what I need it to do.
Sherry Perrotta
Reviewed in the United States on February 23, 2025
Bad fitment. Needs a lot of heat to work the material to fit the vehicle. The product is very thin and debris cuts through it.
Mark Simons
Reviewed in the United States on January 30, 2025
Couldn’t get the film to stretch and fit in iproperly to the front end of my model y
Teresa S
Reviewed in the United States on April 27, 2025
I’m so happy with the TPU PPF HD Clear Paint Protective Film for my Tesla Model Y! This custom-fit, self-healing shield is exactly what I needed to protect my car from scratches, chips, and other road debris. The installation kit made the process super easy, and everything fits perfectly—especially on the bumper and headlights.The clear film is virtually invisible, so it doesn’t change the look of my Tesla at all while offering amazing protection. I love that the film is self-healing, so any small scratches or marks disappear over time. It’s really reassuring knowing my Tesla’s paint is protected, and I don’t have to worry about minor damage from everyday driving.The 6-piece set is a great value, and the quality is top-notch. I can already tell it will keep my car looking pristine for years to come. Highly recommend this for any Tesla Model Y owner looking to maintain the appearance of their car while adding an extra layer of protection!
Tracker
Reviewed in the United States on August 22, 2024
This kit for the car fit well, and it came with several very handy extras like a spray bottle, nice scalpel knife, magnets, and double-edged tool for scraping out bubbles. It made a very tedious process go much more smoothly. Yes, there were a few bubbles and such, but it was SO much more cost-effective than a professional job. Overall, the job took 2 of us about 5 or 6 hours. I would recommend 2 very patient people and an extra spray bottle of very hot water to help with making it tacky when needed. Hopefully it will work to stop the constant road debris damage to the front end.
vijay
Reviewed in the United States on December 15, 2024
Do NOT buy this product. Seriously, if you’re enjoying your Tesla Model Y experience, don’t ruin it by buying or even looking at this thing. Let me walk you through the tragedy:I thought I’d start easy—with the bottom strip under the license plate. It’s a straight strip, right? Should be straightforward. Wrong. It doesn’t stick, even after following the instructions with the soapy solution. Instead, it just hangs there like a sad, soggy piece of tape, awkwardly flapping at the edges.Next, I thought, ‘Surely the headlights will be easier.’ Oh no, if only. The curvature of the headlight lens creates folds that refuse to smooth out. Wrinkles everywhere. I spent 30 minutes trying to fix just one headlight before ripping it off in defeat and questioning my life choices.Then, against all logic, I tackled the front bumper—the Everest of bad ideas. First, there’s no indication of sides, angles, or alignment. When you peel the sticker, it’s immediately clear that this is not a one-person job. To make matters worse, the license plate sits smack in the middle of the bumper, so you have to cut around it or start at one end and work toward the middle like some cursed arts-and-crafts project.By the time you’re fighting with the wrinkles caused by the bumper’s curves, your frustration has reached critical levels. At this point, the only thing this product is good for is filling the trash can. The box it came in might actually be of higher quality.It comes with a magnetic thing that’s useless for this installation. You may find use of that to hang a wreath if you survive your frustration.Save yourself the pain. Leave your bumper naked, or if you really want a protective film, get a professional, quality product installed. Trust me, your sanity will thank you.
robertyu
Reviewed in Canada on October 15, 2024
Good quality ppf film for the price. Recommended for a skilled labour, it’s a challenge to put 2D cutting into 3D panel. If you expect it to fit to the panel without any effort, this product may not be for you.
Recommended Products

$27.98

$ 12 .99 $12.99

4.5
Select Option