Your cart is empty.
Your cart is empty.Product Description
G Merithew
Reviewed in the United States on May 4, 2025
The targets stood up very well to both small and large caliber pistol and medium caliber (5.56mm) rifle fire. The stand bolts together but it should have pins instead as most of us don't own the ranges we shoot on and have to disassemble or attempt to move the stand fully assembled (would require a pickup truck that I don't have). I replaced the assembly bolts with pins (purchased at Harbor Freight) and they worked very well. The product should come with pins instead of bolts.
Kayla Morinan
Reviewed in the United States on May 26, 2025
Set up was easy and it was fun to shoot!
Jimmy allen brasher
Reviewed in the United States on March 6, 2025
Great product!
Christopher T. Fawcett
Reviewed in the United States on March 27, 2025
Terrible don't buy this product...it's very cheap...because it was made cheap...I've re wired mine properly 30 times
catskat
Reviewed in the United States on January 9, 2025
Works well. I modified it so that it is easier to take the plates on and off with spring clips.
Presence x Love
Reviewed in Canada on January 9, 2025
And by supporting steel I mean the "arms" and "legs" of this thing. When you shoot the ar500, the bullet pretty much disintegrates and sprays out every direction and peppers the arms and legs of this thing and the worst thing thats happened it some lost paint and a bit of rust... Thats it... Most of the other targets ive had had cheap and thin legs compared to these which have some weight to them.Its surprisingly portable and easy to move around, it even comes in a small box thats a bit friggen heavy, but sets up in a couple minutes with 2 peopleI LOVE that you can also change the height of this, super smart as you're able to adjust it for the type of backstop you have.We've shot the ar500 with everything from 9mm to 44mag to AP 6.5 and AP 308 and has hardly made a scratch on the steel.Not to mention, the targets when properly setup are angled down to ricochets are a lot less likely.Liked it so much we got another
Phoenix
Reviewed in Canada on January 22, 2025
I got this for my friend's private property. its designed to be easily taken apart and put back together, and to me that was the major selling point, because theres a few times in the year where I could bring this to family and friend's property and shoot the S, so to speak.AR500 steel is build mostly for just under full power cartridges, think .308, its able to roughly absorb 2100 foot pounds of force, for those who load their own ammo and gauge how fast its going.I like that its adjustable, not just for being able to shoot prown, but the if you have a low incline, the lower setting would give you a backdrop, which is something to consider when target shooting outdoors.id agree with the other reviewiers on the complaint about the chains, they are the most likely point of failure and are not particularly special.The metal itself seems fine, most of it is covered in what i assume to be a zinc finish, doesn't matter much to me as the steel framing only needs to be strong enough to hold up its targets, and the targets themselves are heavy and thick.overall its about as transportable as you can get for standing steel targets, most are desgined to be afixed, this one is not, while that certianly doesnt mean its fun or easy to lug around, its better than nothing.
rob
Reviewed in Canada on January 16, 2025
I was looking for a couple small gong targets and then saw this complete set that includes 4 targets and a rack for just a few dollars more than I was expecting to spend on just two target plates.This set comes with everything that you need to assemble it - including the wrenches and hex driver. I decided to test these out to make sure that everything works as expected and they do... however if you have full-sized wrenches, or even better, an impact driver, you will save yourself a lot of time and fiddling around. The large bolts that hold the chains to the target plates are 3/4" or 19mm. The smaller bolts are 9/16" or 14mm. You can use either imperial or metric sockets. The hex driver is 6mm.There are a couple claims in the pictures that are not accurate - it says that the chains are "already installed bolt" - they are not. One picture also indicates that the legs "click" together - they do not - they need to be bolted. These are not significant issues, just mean that you will spend more time with a wrench in your hand. The parts list also shows that there are 18 washers included - there are actually 10 small black ones and 8 larger silver ones. The larger ones are used on the bolts that attach the chains to the crossbar, the others are everywhere else.I assembled this kit in my home and would suggest that you do the same, then tear it down only as much as you need to transport it to where you will be using it so you do not spend a lot of time wrenching instead of shooting. You can see the assembled rack in my house - obviously I will not be shooting it here!I have never had AR500 targets before and when I showed them to a friend who has, he said that he expected the target plates to be heavier than they are. I have not been able to get to the range where I can shoot a heavy rifle yet, so I have not been able to test them with anything but a 22LR (which they laughed at!). I hope to get there in 2 weeks, but I need to post this review within 30 days. If there are any concerns after hitting it with a 30 cal, I will post a revision.The targets feel solid, the frame feels quite stable - I can't wait to get this outside to test it.
Customer
Reviewed in the United States on April 6, 2025
Easy to put together.
Steven Day
Reviewed in Canada on April 5, 2025
You have to be an avid shooter to really enjoy this. The good: it's very heavy duty, everything from the chains to the targets. It makes the actual practice more enjoyable when the bullets merely hit and fall and I don't need to go reset them again.Very adjustable in height but not in angles. You need to have a very flat surface to really use this to it's fullest potential.The bad. It's very heavy. Obviously expected considering how heavy duty it is but it does make it a pain to pack up all the time. Considering I shoot every few months, this is verging on more hassle than it's worth as I need to go away from home to do so.Very good quality but for an occasional shooter, I think it's overkill.
Omar Santiago
Reviewed in the United States on April 29, 2025
The media could not be loaded.
Silversong
Reviewed in Canada on December 26, 2024
Wow, this is one heavy duty, well made and finished target stand. Chain is really heavy and coated. Simple to adjust with four bolts. Picture shows extended and unextended, there are NOT two sets of gongs. Recommend flat ground for stability as there is no angle adjustments for I level ground.
Dan62
Reviewed in the United States on November 8, 2024
The media could not be loaded.
Recommended Products
$32.99
$ 16 .99 $16.99