Your cart is empty.
Your cart is empty.Managing medium to large gardens, nurseries or greenhouses has never been this easy-breezy! The Galcon 8054 AC-4S smart irrigation controller takes the task off of your hands no matter the size of your garden yet super-easy to operate with garden sprinklers for small areas or large zones. FEATURES YOU WILL LOVE: Flexible Scheduling: Programming can be set by the day of the week, either daily or weekly, or in cycles and with irrigation duration as short as 1 second to as long as 12 hours to accomplish an automatic sprinkler timer system. Per Valve Independent Functions: Our garden timer water system allows you up to 4 start times per valve when weekly programming is used that's a total of 16 different start times across all four valves! Cyclic Programming: You can use this 4-zone hose faucet timer in cycle for as short as every day to as long as 30 days. Sensor Connection: Galcon has developed water timers for hoses and irrigation controllers with a sensor connection. The 8054 AC-4S has a sensor input that can be used with a rain sensor, soil moisture sensor, etc. The sensor input is assigned to the individual valves, providing you with the flexibility of preventing irrigation in areas that are exposed to rain like outdoor lawns and allowing irrigation to areas that are not exposed to rain like covered outdoor cabinets weatherproof or patio. Monthly Water Budgeting can be used to adjust irrigation from 10% to 190%. Rain Delay of up to 30 days Perfect outdoor misters for patio in propagation or sprinkler controller 4 zone.DETAILS: Can identify short circuits in the system, disconnection of a shorted valve and visual farm. 9V battery program backup (not included) Input: 110VAC 60Hz Standard - CE Battery (backup) - 9V Operated Valve - 24VAC Designed for use in USA and Canada only.
Customer
Reviewed in the United States on July 15, 2024
Works exatly as it should with very clear instruction via website - no instructions with product
kevz71243
Reviewed in the United States on July 11, 2021
I’m really not a fan. It’s got a few short comings. I set this timer up on my propagation benches in my greenhouse. I did everything by the book and… nothing. I could use it manually. But the timer just simply won’t work. I spent over half the day messing with it trying to figure out what’s up with it. As a last ditch effort, I swapped to another zone and somehow using all the same settings it started to work. After hours of nothing and out of the blue it starts working?? Scared me when it went off lol. Then I set it for a more practical time session and for no reason at all it stops working again! So.. I went to zone 4! The last zone and it started working again. What in the hell?? After about a hr of swapping zones I noticed it was trying to water on zone 1?? Haha wth?? There’s a start setting. The same setting that they’re telling u that has nothing to do with cycle timing, which is BS!! It does. If u don’t set that time a min ahead before the actual time it is currently. It will not keep time. As in the timer will stop keeping time and will not keep counting down. The dumbest thing ever! A setting that your not even suppose to mess with. But if you don’t set it 1min ahead of the time you at currently at it will not keep time and the timer will not work. And I’m talking about the actual clock timing settings. I’m referring to start times underneath the days settings. A setting that only should work if you’re setting the time by the days of the week. Which I’m not. I set a endless time a cycle that will run from 7am-6pm 3sec run at 10min intervals. This makes my third timer. Last two was a scam. Bait a switch on a older timer that didn’t work by the seconds. I kept all 3 thinking I’m sure I’ll use them on other Applications. All in all if I could do it all over again. I’d never bought these 3controllers I’d found something else that was a smart device so I could set it using my phone from a air conditioned building then wifi the set programs to the device. Vs standing up on a ladder half the day trying to leave the timer in place and set it where it was 9ft up on a wall out of the range of the mist heads. When you’re not sure if it’s a wiring problem battery problems, wall outlet problem or just a timer problem u really don’t wanna unwire it till u know what’s going on.
Customer
Reviewed in the United States on May 12, 2021
Does the job correctly
DH
Reviewed in the United States on October 28, 2021
Timer can be set to stop after only seconds which is perfect for mist systems.The S at the end of the part number indicates that the timer can be programed to run in seconds. All the other galcon timers without the S don't operate in seconds only minutes
Ohio Horticulture Guy
Reviewed in the United States on August 4, 2019
Great unit! You do not need "technical support" for a 6 zone irrigation system.Here are the controls:- arrow in a circle = cycle tru options- the --> = adjust the option cycled to- +/- = adjustmentsI set this unit up in my greenhouse in 2016 it's still operating the same 9 solenoid valves to this day, 3 years later. Yes if all the valves are wired together you can open as many 24v valves as you want, all at once.If you dont know what transformers, solenoids, and/or basic wiring there is only one solution: do some homework first and order later.
S.Burns
Reviewed in the United States on August 17, 2019
This controller is perfect! I have a small nursery business and many areas that need watering. I currently have 3 zones hooked up with different times and durations set. The initial programming was a little tricky but between YouTube videos and the documentation, I was able to figure it out pretty quickly. It's been very reliable and I'm very happy with this purchase.
Lorne
Reviewed in the United States on April 18, 2018
Works well. Haven’t found a number for technical support yet. It’s not in the basic manual.
Jarrett
Reviewed in the United States on May 3, 2015
Galcon is known for its quality. I've only used this product for a short while but it has worked flawlessly.I like that it has a battery to back up your settings if you loose AC power. The battery, however won't power the solenoid valves, but that isn't what the battery back up is for.This model is great as you have a great deal of flexibility in programming your irrigation system. It will also control 6 zones. Additionally, it will allow you to set irrigation times in the seconds, especially helpful for misting cuttings or "baby" plants.
Recommended Products
$83.95
$ 38 .99 $38.99