Your cart is empty.
Your cart is empty.Product Description
Share your video/audio/data from PC or Old-styled laptops, Desktops, DVD that has only VGA ports to any HDMI-equipped devices like Smart TVs, monitors, projector and displays for big screen viewing.
PLEASE NOTE:
- If there is no signal on the screen, please make sure you plug the USB cable, this is necessary power required for the conversion from VGA to HDMI. Or remember to toggle the computer screen to the monitor or TV.
- If the image is blurry, it is recommended that you switch the resolution to try.
- If there is audio noise, please use a separate USB charger to charge adapter instead.
- Our VGA to HDMI adapter supports a maximum resolution of 1920*1080, which will not work if your resolution exceeds 1920*1080.
- This only converts VGA signal into HDMI signal, if won't work if you are using HDMI signal source.
Doesn’t work / not recommended for:
- Does not work with Roku/Fire Stick/Netflix/Chromecast etc TV box as they haven't VGA interface, you need to purchased a HDMI to VGA adapter.
SUPPORT VGA RESOLUTION:
From 800*600 to 1920*1200 input;
SUPPORT HDMI RESOLUTION:
Up to 720P/1080i/1080P@60Hz.
Compatible OS:
Windows, Linux, OS
- The USB MUST be connected for supplying power for the built chip.
- The 3.5mm audio jack need to be connected to earphone port, not the microphone port or a speaker.
ONLY VGA TO HDMI:
VGA to HDMI adapter cable is one-way design. It only converts from VGA to HDMI.
Can NOT be used as a HDMI-to-VGA cable.
ONLY from VGA to HDMI
How to use it?
- Insert the USB into the related interface on computer for getting the supplementary power.
- Insert the VGA interface into the computer or other equipment with the VGA output(desktop/laptop/notebook/DVD).
- Insert the 3.5 Mini Jack into the Audio output on your source device (PC, Laptop, Xbox etc.)
- Insert the HDMI to displays with HDMI female interface. (TV, monitor, projector or display screens),HDMI cable is needed, NOT included.
- If there are more than one inputs on your displays.
- Generally, signed as HDMI 1/HDMI 2,/HDMI 3 or DVI/DP/HDMI and others
- Please select the corresponding HDMI input interface on your TV screen.
FOR EXAMPLE :
If you want to connect the HDMI cable to the HDMI 2 interface on your TV.
Please select HDMI 2 input on your TV with the remote control.
Dept of Physics
Reviewed in the United States on June 5, 2023
The VGA to HDMI adapter works fine when you power it with the USB cable. We used it to go from and old Document Camera (ELMO) to a large TV that we were using as a monitor. It was a replacement for an older adapter that failed. This adapter gives better resolution.
Chris Doster
Reviewed in the United States on December 27, 2022
Does not auto-sync good, TV's and monitors may not be able to display all of screen, mine extends past limit 3% on my default 1920 x 1080 about 12-16 pixels on right and left are missing, its very confusing because that's about the size of the mouse. also sometimes I can't see something that I need to see near the edge. I have tried this with 2 TV's and 1 monitor, all with HDMI inputs with same issue. I am using a good NVIDIA card but it gives me no option to adjust the screen other than left or right, there is no stretch option. So I have just ordered a new monitor with the VGA input that I need and will eliminate this adapter.
Chris M.
Reviewed in the United States on July 1, 2020
A picture is worth a thousand words.Having a picture showing that it is "VGA to HDMI" and NOT "HDMI to VGA" clarifies in ANY language which way this product does work. Wish more people used pictures along with directions !!! And It Does Very Well as Advertised. Thank you very much.After running 24/7 for several months, this product died. It is noted that it runs "HOT" when constantly used, as I needed to do with it. Don't get me wrong, my application can be considered "extreme" running it hard for so long. I like the aluminum case, and highly recommend the MFR consider modifying the case design to better radiate the heat, as well as part of the internal case press against the "chip" to act as a better heatsink to effectively dissipate the generated heat.Yes, I would still consider buying it for "normal" use, and I will most likely do so, again.Very good product, I still give it 5 stars !!! .
Richard F Wicker III
Reviewed in the United States on May 29, 2020
I have had this product for just over 60 days. For the past two to three weeks I have been experiencing a thermal break down in which my monitor screen goes blank for 2 to 4 seconds and then comes back on. This happens at least once an hour. At least once a day I have to unplug the power to the adaptor and wait 15 seconds and then plug it back in to get it work. I have connected my computer to other monitors without this adaptor in the middle and it works without a problem. I have connected other computers to the monitor and it works - no problem. In other words it is not the monitor or the computer. The problem is the adaptor - it is faulty and does not work properly. It barely lasted 5 weeks.
Tacitus
Reviewed in the United States on September 16, 2019
Hooked it up successfully to my HDMI TV along the path of a 4 port KVM switch that was VGA only, which should give the latter an indefinite lease on life. Power is, naturally, critical with these connectors, so make sure to put in your USB power!Additionally, ran into a quirk where the resolution that the PC was at using the old monitor, which was not the widescreen standard 16:9, caused it not to work. Had to hook it up directly to the box, switch the resolution to the 1920x1080, and from there it proceeded to work fine. I'll chalk that one up to the KVM in the mix.
K H
Reviewed in the United States on July 2, 2019
Used this cable to connect a computer's VGA output to a monitor with only HDMI or DP inputs. This was for a dual monitor set up and one monitor was already using the computer's only DP output. So I was able to make use of the VGA output by using this cable. At first, I connected the adapter to the computer, plugged in the HDMI to the adapter, and plugged the other end of the HDMI into the monitor. That did not work. Once I hooked up the included USB cable, one end to the adapter, the other to the computer (not monitor), in addition to what I had already done, it worked just fine (shown in pics). Only issue was changing the monitor settings to make the picture clearer. Overall, this cable did exactly what I needed it to. Both monitors are working as independent(expanded) displays.
Dave A.
Reviewed in the United States on May 12, 2019
This adapter does perform its function as designed. I'm not sure if anything can be done to improve the resolution, but it's not as good as a direct VGA connection. It's acceptable, because it does work, and not too pricey. It does require USB power, and the provided USB cable is pretty short (less than a foot), so keep that in mind when ordering. I suppose if you needed it, you can get a USB extension for it. It also comes with an audio connection cable, for those displays with audio output.. Overall, I needed it, and it works for my needs, so I'm not disappointed. I would give it 5 stars if the resolution was better.
Joseph Ruggiero, Jr.
Reviewed in the United States on November 20, 2019
Had an older but still useful Core2Duo system that I teamed up with a recently-purchased FireTV, for an all-in-one entertainment solution. Since the TV itself only had COAX, RCA and HDMI I needed something to convert my computer's VGA output to HDMI and pass through the audio from the PC as well. This came with all required wires, is powered from the USB port, and creates a clear picture on my TV, at its top resolution. Initially, the image looked a bit fuzzy, and text was hard to read, and I was going to blame the adapter, but I soon realized that the FireTV had picture enhancements enabled by default, which was over-sharpening text. Once I turned those features off, my desktop looked normal.
Recommended Products