Your cart is empty.
Your cart is empty.Product Description
Compatibility for Smarphones, Cameras and Flashes
1. Compatible Smartphone Models (This Table Only Lists the Tested Smartphone Models, NOT All Smartphones. For the compatibility of other Smartphone models, a self-test is recommended.)
- iPhone 6S, iPhone 6S Plus, iPhone 7 Plus, iPhone 7, iPhone 8 Plus iPhone 8, iPhone 6 Plus, iPhone 6, iPhone X; Samsung galaxy S8, Samsung galaxy Note8, Samsung galaxy S9
- HUAWEI P9, HUAWEI P10, HUAWEI P10 Plus, HUAWEI Mate 9 Pro, HUAWEI Mate 9, HUAWEI Mate 10 Pro, HUAWEI Mate 10, HUAWEI P20, HUAWEI P20 Pro
2. Compatible Camera Models (FUJIFILM cameras are divided into three kinds according to their controlling ways to camera flash):
Please Note: X100T do not have second-curtain sync (REAR) function. The AF-assist beam will light up when the shutter is at low speed(<200).
A: GFX50R, GFX50S, X-Pro2, X-T20, X-T3, X-T2, X-T1; B: X-Pro1, X-T10, X-E1, X-A3; C: X100F, X100T
Compatible camera models & functions support:
A: Support TTL(Standard/REAR/HSS(FP)); Support M(Standard/REAR/HSS(FP)); Support Multi Flash; Support AF-assist Beam
B: Support TTL(Standard); Support M(Standard); Multi Flash; Does NOT Support AF-assist Beam
C: Support TTL(Standard/REAR); Support M(Standard/REAR); Multi Flash; Does NOT Support AF-assist Beam
3. Compatible Flash Models (Please Note: Supported Functions should be both owned by X2T-F and flashes.)
- No Extra Receiver Needed: AD600 series/AD400 series/AD360II series AD200 series/V860II series/V850II, V350C/TT685 series/TT600/TT350C QuickerII series/QTII/SK II series, DP II series/GSII
- XTR-16 as Receiver(NOT Included): AD360/AR400(The flashes with Godox wireless USB port), Quicker series/SK series/DP series/GT/GS series/Smart flash series(Can only be triggered)
- XTR-16S as Receiver(NOT Included): V860C V850
Special Features
HSS (High-speed sync): Yes
- Second-curtain sync: Yes
- Flash exposure compensation: Yes, ±3 stops in 1/3 stop increments
- Flash exposure lock & Focus assist: Yes
- Modeling lamp: Control the modeling lamp globally or individually
- Audio Beep: Yes
- Wireless Shutter: Acts as receiver to control the camera trigger through the 2.5mm sync cord jack
- Firmware upgrade: Upgrade through the Type-C USB port
- Memory function: Settings are stored 2 seconds after the last operation & recovered after a restart
Physical Properties
Display: A large LCD panel, backlighting on or OFF
Dimension: 72X70x58
Net Weight(g): 90
Specifications
Flash Exposure Control
TTL autoflash: TTL
Manual flash: Yes
Stroboscopic flash: Yes
Wireless Flash
Transmission range (approx.): Up to 328ft / 100m
Built-in wireless: Godox X 2.4GHz
Modulation mode: MSK
Channels: 32
Wireless ID: 01-99
Groups: 5 TTL and Manual
Marcus Modinsky
Reviewed in the United States on June 7, 2024
Great, mounted on an XT3. Never had a problem with it and was able to successfully do the firmware upgrades
junglecatimages
Reviewed in the United States on January 4, 2023
Been using this for a year or more, probably 100s of jobs and it has never let me down. Much better than the first version. Highly recommended
Fran Mar
Reviewed in the United States on January 15, 2023
Everything is alright about it, obviously complicated as any other flash's menus don't get me wrong. but it's a good flash just had a faulty one that kept switching modes to TTL and M over and over again(seller issued replacement quicky) 👍
Yuriy
Reviewed in the United States on July 11, 2022
Love Godox product. Good quality for a fraction of the cost.
Trent
Reviewed in the United States on January 8, 2022
Pros:+ It ships with the latest firmware (1.2, as of Jan 2022), so no camera freezing issues.+ Works well+ CheapCons:– The "improved" screen brightness is not adjustable, so you've to either keep it off, or have a blue spotlight bouncing off your forehead as you shoot. Not cool.– No AF illuminator, as with any other mirrorless system. Why bother with the switch and a window then?!– Lots of "Engrish" in UI and the manual, some items are quite cryptic.To address a few concerns:1. Yes, the (un)locking mechanism is very stiff from the factory. I suggest actuating it a few times before putting the device on your camera's hot shoe. After 5-10 actuations you'll be able to disengage it with one hand. Don't worry, you won't break it.2. If you want to conserve the battery, turn off all the whistles and bells that you're not using at the moment, such as Bluetooth, backlight, ID etc. And set the "Shoot" to single.3. There's plenty of room to replace the batteries without detaching it from the camera (tested on XT4 and X100V). Just make sure to memorize the correct polarity beforehand.PS: Naturally, there's no passthrough TTL hotshoe, just an X-sync contact. Fuji TTL uses a duplex protocol, which serves only one flash at the time. All the ratios and groups are handled by the trigger; camera thinks it's connected to just one strobe. Adding a TTL hot shoe will require sacrificing one of the wireless groups, which is doable and could be done as a menu selectable option. Hey Godox! A lot of photographers can live with less than 6 groups, just give us the on-camera TTL option in X3T!Edit/Update: As it turns out, if your TTL flash is sitting in this trigger's hot shoe and has an RF sync enabled, it will have a TTL sync with the trigger. Just assign it a separate group, and you're good to go!
Omar Gonzalez
Reviewed in the United States on April 10, 2022
I like that this lets me shoot off camera and has different functions for different lights
Paul D
Reviewed in Australia on June 11, 2021
Fast delivery - item exactly as described - Thank you
Swan Island Girl
Reviewed in the United States on April 3, 2021
I bought this Godox transmitter/receiver for my new Fuji XT4. I slipped it on the hotshot and locked it, but then I was unable to unlock and remove it. Eventually, I was able to, but it wasn't easy. I haven't used it since, but I did tape the lock in the unlocked position, so that i wouldn't have that problem again. I wonder if the other model is any better? I have the Nikon versions that I bought a few years ago and I haven't had any problem at all. It might only be the newer ones as I have read other reviews. Not sure what did the trick exactly to get it removed, but I took the battery out of the transmitter and the camera and it came off.
Francisco Salazar
Reviewed in Canada on September 12, 2019
This is a great product...but: The autofocus light does not work with my XT3 and there is a lack in information about the different menus that you might find when working the remote. Now the support here in Canada is amazing, I have had a few conversations and they have been friendly and well informed.
Taylor A.
Reviewed in the United States on November 4, 2019
This trigger is fantastic, reliable and an upgrade to the X1T that is well worth the purchase. It is much easier to change settings with the added physical buttons and the dial on the bottom. But the best feature of all is the ability to control the trigger via the Godox App! I find this especially helpful in shooting architectural photos with multiple lights since I am often firing my camera remotely and can not run back to the camera to change settings easily. Now I can move around a home changing settings as I go without touching the camera or the lights! This may not be a big deal to event photographers, but for anyone firing a camera remotely, this is a HUGE advantage.The one caveat to my 5 star review, however, is the terrible customer service offered by Godox. I tried reaching out to them multiple times with no response. So, you are on your own to troubleshoot.Personally, I had a hard time getting my phone app to connect to the trigger when I first received the X2T since it was asking for a password. I had no idea what the password was or where to find it. It took multiple readings of the manual to finally find the code (p.42 of the manual) written in fine print under the section titled "Using the Flash Trigger". A nice big card with the code included would have been helpful!To save you the trouble, the code for connecting the app to the trigger via bluetooth is "000000".Have fun!
Recommended Products
$599.90
$ 99 .00 $99.00
$89.00
$ 40 .99 $40.99