Your cart is empty.
Your cart is empty. This flash trigger can be used on the following series camera models:
D5 D4 D60 D70S D90 D100 D200
0300S D300 D500 D610 D7C0 D750 D800
D810 D3100 D3200 D3300 D5000 D5100 D5200
D5300 D7000 D7100
Specifications:
Model: XPro-N
Compatible cameras: series cameras (i-TTL autoflash)Support for the cameras that have PC sync socket.
Power supply : 2’AA batteries
TTL autoflash : i-TTL
Manual flash : Yes
Stroboscopic flash : Yes
High-speed sync : Yes
Second-curtain sync: Yes
Flash exposure compensation: Yes. 士3 stops in 1/3 stop increments
Flash exposure lock: Yes
Focus assist: Yes
Modeling lamp: Control the modeling lamp by the flash trigger
Beeper: Control the beeper by the flash trigger
Wireless setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack
ZOOM setting: Adjust the ZOOM value by the transmitter
TCM function : Transform the TTL shooting value into the output value in the M node
Firmware upgrade : Upgrade through the Type-C USB port
Memory function: Settings will be stored 2 seconds after last operation and recover after a restart
Transmission range (approx.) : 0-100m
Built-in wireless: 24G
Modulation mode: MSK
Channel : 32
Wireless ID: 01-99
Group: 16
Display: Large LCD panel, backlighting ON or OFF
Dimension/Weight : 90x58x50mm/80g
PACKAGE CONTENTS
1* Godox Xpro-N Trigger
1* Product Manual
1* Gift
Jeffrey
Reviewed in Singapore on July 28, 2024
It works as expected.
Amit
Reviewed in India on May 8, 2024
Amazing with the flashes.
Abhinaba N.
Reviewed in India on January 30, 2024
Awesome product
Anil Vohra
Reviewed in India on July 17, 2023
Easy to operate. Good for layman photography. Always useful when condition’s demand
FinFET
Reviewed in the United States on September 25, 2022
The Xpro worked seamlessly with my Godox TTL and manual flash units. I bought because my existing Godox X2t was a little annoying to make adjustments with - but the Xpro is a lot easier. The UI is intuitive, and the ability to show just one channel is extremely helpful when I want all the flashes to be the same.Unsurprisingly it works flawlessly with my Godox V1, Godox TT685ii and Godox TT600s.Also, NOTE: it does not like NiMH batteries, constantly shows the low battery warning, but still functions. It isn't happy about the lower voltage from NiMHs.
Murali n.
Reviewed in India on May 9, 2022
Does its job for the buck paid.
Keith L
Reviewed in the United States on August 12, 2021
Works like its suppose to but could have better software. It definitely not worth $70 but what else is the alternative? The Yongnuo 622 works great but isn't compatible with good. For the price of this receiver, you get trigger and transmitter in the yongnuo triggers..The asset beam doesn't work with mirrorless cameras.When it does work with DSLR cameras it sucks.when checking flash output from the last shot, it takes 3 button pushes to return back to original settings.Menus could be a little better. I find myself googling the pdf file once in a while to remind myself what things mean in menus.
Kris H
Reviewed in the United States on September 12, 2018
This trigger is awesome. I switched my studio setup to Godox and it was the best move i"ve made
Mamaofboys
Reviewed in the United States on November 4, 2018
Works great with my Nikon D5100 and Godox sk400ii. I have not tried incorporating more than one light.
Enrique S.
Reviewed in the United States on January 14, 2018
Excellent
Crispix396
Reviewed in the United States on December 12, 2017
This is Great
Recommended Products
