Your cart is empty.
Your cart is empty.Product Description
- The set includes a S2435 4500KV brushless motor, a 25A ESC and a 2.2kg servo, which is perfectly fit for the 1/16 1/18 RC car. What you needed is all included in the combo, specially for RC car DIY hobbies.
- Motor Specifications:
- KV(RPM/Volt): 4500KV
- Max RPM: 60000
- Max Current: 22A
- Max voltage: <13.2V
- Max Watts: 300W
- Can Size: 2435
- Can Diameter: 24mm
- Can Length: 35mm
- Shaft Diameter: 2mm
- Shaft Length: 12mm
- Connector: 3.5mm golden banana plug
- Item weight: 56g
Package Information:
- Package size: 10.5 * 8 * 6.3cm / 4.1 * 3.1 * 2.5in
- Package weight: 183g
- Brand gift box package
- Package List:
- 1 * GoolRC S2435 4500KV Motor
- 1 * GoolRC S-25A ESC
- 1 * GoolRC 2.2kg Servo
Dalton wells
Reviewed in the United States on March 26, 2025
Little disappointed because I misjudged what I was looking at, this isn't for 1/10 scale, a little smaller than that kinda like wpl rc vehicles size, only reason I gave 5 stars because the product was accurate and seemed nice quality, I think to fix the issue.I'll pick up a smaller rc to put this in and see what fun I can get.
Ryan Brown
Reviewed in the United States on March 31, 2024
It made my latrax Teton wake up and perform like I never seen before, Great value and performance only issue is servo is not for 1 18 scale. Dont hesitate buy one of these kits today.
JM
Reviewed in the United States on June 12, 2023
I bought this for my latrax Teton to run 2s lipo. So far so good. I was worried at first impression because it was slow to respond to throttle and I saw some other similar comments. I thought I'd need a program card to fix it but I found a video that said to swap 2 of the wires going to the motor. Since this is a NON Sensored motor, it's OK. After doing that everything was fine. It does have some trouble getting started spinning if there is much resistance in grass or other surfaces but when it's going it's quick!
Quay Painter
Reviewed in the United States on July 13, 2022
Price was very reasonable. I just wanted the ESC and the motor but "turned" out the servo fit and worked great! It's definitely over kill for a 9in Jet boat! I put a little bit too much juice and fried one. Got a second one on the way.Update 7/24: servo just left the chat. ESC is still running strong. I'm not going to change my review rating. You get what you pay for and for what I paid I'm not disappointed. I don't think I would have had any issues of this wasn't ran in a marine environment and stayed within the power rating. Still 5 stars here.
Ronald k. Fisher
Reviewed in the United States on June 26, 2021
Does not fit Traxxas 1/16 erevo at all as stated in their ad. Even if you could mount it , it uses a very small hard to find pinion , so it's useless , very disappointed .
BK
Reviewed in the United States on February 1, 2020
Everything worked great until the plastic case shattered by itself. I literally used it 4 times before everything fell apart. Now I gotta make one to fit.
Customer
Reviewed in the United States on April 19, 2020
High power and torque perfect for WPL C44KM ! climbing debris or flat out running with power set at 75% on transmitter it will pull wheely across the room and at 25% it will crawl at a snails pace! I bought a 2nd one for my WPL b16 6x6 with same results will be buying more in near future!
Greg mcatee
Reviewed in the United States on December 8, 2019
First off the servo is way to big for a 1/16 or 1/18 scale rc. Ive bought 2 programing cards and niether one of them works with the esc it does nothing but beep over and over. Both cards were recomended with the s series esc and still only beep beep. So ive wasted $25 on programing cards that dont work as advertised. Other than that motor is verry fast.
Recommended Products