Your cart is empty.
Your cart is empty.This Kit is a conversion from bushings to bearings and Includes Premium Wheel Bearings with Tough Steel Seals and 100% 304 Stainless Steel Axle(s). If Your Machine Needs Wheel Bearings, it is Very Important to Check Your Axles for Wear or Rust. Factory Axles are Much Softer Than the Bearings and It is Highly Likely That The Old Bearing Has Damaged the Axle. A Damaged, Rusted or Worn Axle Will Significantly Shorten the Life of The Replacement Bearing. HD Switch Axles are Made of Hard Seamless 304 Stainless Steel (304SS) and Will NEVER Rust. 304SS is Harder, Tougher and Will Last Much Longer Than a Soft Carbon Steel Factory Axle. Our Bearings are World Class Quality and Use Tough Steel Seals.
Jeremy C.
Reviewed in the United States on July 19, 2023
Pain in the butt getting the original bearings and metal ring out of the mower tires. I had to use my reciprocating saw to make three cuts to get the metal ring out. Once the wheel was ready, these bearings fit in the openings nice and snug. I had to use a mallet to get them in flush and then the pipe just slid right in. My front tires turn SOOOO much easier now! This is way better than the OEM stuff. I'm very happy with this purchase!
ARUJ
Reviewed in the United States on June 2, 2023
I was able to replace the broken axle and hub and reinstall on the mower within 15 minutes.
Elizabeth A. Greene
Reviewed in the United States on September 24, 2022
My Husqvarna z254 came from the factory with sleeve bearings for the front wheels, and one of them self-destructed from lack of lubrication. (If you have one of these, the factory bearings need a LOT of grease pumped in or it won't reach the far bearing.)(Wish I'd known that.)This parts kit replaced the worn-out sleeve bearings and the axle tube that runs inside them on both wheels. To install it I needed a jack to lift up the mower, a 16 mm wrench to remove the wheel, and a punch and hammer to tap out the old bearings (they came out easy). I used a 1" socket to support the bearing as I tapped it back in, but if you were careful, you could do it with just a hammer tapping around the edge. It was exactly what I needed, they fit perfectly, and the mower is back working again....Now I'm wondering if there are any more upgrades I can get.
Tech Geek
Reviewed in the United States on August 23, 2022
Should have come from the factory with this quality upgrade.
Jason Tillery
Reviewed in the United States on April 27, 2022
Great product
Recommended Products
$40.76
$ 21 .99 $21.99