Shopping Cart

Your cart is empty.

Your cart is empty.

Heat tape, 140FT Deicing Heating Cable,Pipe (Metal And Plastic) Freeze Protected Water Pipe Heating Cable, Self Regulating Temperature, with Mounting Buckle, 120V 8W/ft

4.6 (3) Write Review
Free shipping on orders over $29.99

$65.99

$ 25 .99 $25.99

In Stock

About this item

  • 【Product Specifications】120V 8W/ft IP67 Plug wire 5ft(with indicator light).Able to adjust heating temperature according to ambient temperature,the maximum temperature is 167°F,can be used at -40°F.
  • 【Scene Use】Prevents icing and ice dams on roofs, gutters, downspouts, prevents icing of pipes (metal, plastic, etc.), and other DIYs where heating cables are needed.
  • 【Material】The inner core is made of pure copper, the inner protective sleeve is PVC, the explosion-proof layer is made of aluminum winding, and the outer protective sleeve is high and low temperature resistant TPE, which has passed UL and other standard certifications.
  • 【Easy installation】 Just install the heating cable with the installation button at the position where it needs to be used, and it can be used when it is powered on. When it is not needed, please unplug the plug directly.
  • 【Service Upgrade】Our professional customer service department will make every effort to ensure your satisfaction, 30-day money-back guarantee and 1-year warranty. If you have any questions about your products, please contact us, our customer service team will reply within 8 hours and provide you with a 100% satisfactory solution.


Product Description

11
1
1
1

1

FIX THERMOSTAT

1

APPLY CABLE

1

FIX CABLE

1

APPLY INSULATION

300*300

Why choose us?

1. The product can self limit the temperature to 122 ° F, so there is it is more suitable during use;

2. Compared with other trading companies, We produce for ourselves;

3. The waterproof standard of the product shall reach IP67;

4. It can be used above - 40 ° F and is fully applicable to the United States.

4

1. As there are electric core parts and plastics inside the product, it is not allowed to fold and twist the product violently during installation;

2. Before installation, please conduct a 10 minute power insertion test on the heating cable. After 3 minutes, touch the product gently. If there is heat, you can continue the installation;

3. Air switch shall be installed at the front end of the heating cable, and this product is only applicable to 120Vac;

4. The ambient temperature during installation will affect the bending degree and hardness of the cable. Please install according to the following data:

a. At 50 º F, the minimum bending radius of the heating cable is 1/2 ";

b. At 32 º F, the minimum bending radius of the heating cable is 1 ";

c. At - 4 º F, the minimum bending radius of the heating cable is 1-1/8 ";

d. The minimum installation temperature of the heating cable is - 4 º F.


Patrick
Reviewed in the United States on March 1, 2025
I ordered 2 cords and both didn’t work
James T. Harris
Reviewed in the United States on August 7, 2024
Works ok
Mr. Davis
Reviewed in the United States on December 4, 2024
I installed a 140’ tape first, and it warmed up nicely, then I installed a 100’ tape on the roof, and it didn’t seem to warm up. I’m 68 years old and climbing on a roof for a few hours is hard to do, and then finding out it might be defective, is ridiculous. I’m hoping that it warms up as it gets colder out, I’m not really sure that I can physically take it down and put another one on my house. I’m totally disappointed at this moment,