Your cart is empty.
Your cart is empty. High-quality Stainless Steel Screws Nut Lock Flat Washers Kit
Screw Head Style: Pan Head Screws
Screw & Bolt Drive: Phillips
Material: High Quality 304 stainless steel
Package Quantity: 300 Piece
M2*6---------------------------20-Pieces
M2*8---------------------------20-Pieces
M2*12-------------------------20-Pieces
M2*16-------------------------20-Pieces
M2*20-------------------------20-Pieces
M2 Nuts...........................60-Pieces
M2 Lock Washers.................70-Pieces
M2 Flat Washers...................70-Pieces
Timothy Schmidt
Reviewed in Canada on February 27, 2025
Handy little kit to have for small projects and various 3d prints. I used them for putting together a custom 3d printed keyboard.
KGM
Reviewed in Canada on January 14, 2025
Bought these to replace the useless screws securing the arms on reading glasses with bolts and nuts. Ordered the M2 size but it came with an M3 label inside the box - this caused some confusion until I measured them and found they were the M2 size I had ordered after all. Wonder if this simple mistake could cause the "frequently returned" status Amazon assigns to this product. Moral of this story: check screws with a micrometer to compare with label in box. Otherwise, product looks good.
PLM
Reviewed in the United States on June 23, 2024
A great assortment of nuts & bolts
R. Adams
Reviewed in the United States on March 4, 2024
Needed to find long micro screws and nuts for a custom project. Since the local Home Depot does not carry this, I was very happy to find this available. The extra lengths will come in handy in the future.
BlueRevenge
Reviewed in Canada on February 14, 2024
Bought the M3 because you can use M3 (x 12mm) screws to replace LP light screws on older Audi / VWs, the factory ones of which are notorious for the head stripping out. You also need stainless due to the outdoor/vehicle environment. The original screws are tapping screws, not machine screws; but, M3 will fit/thread the hole made by the tapping screw and hold with a proper securing force.These are also not the hardest of screws though and the heads will *also* strip out but in the case of replacing the aforementioned LP light screws I recommend you drive a screw in and out of the hole a few times, without the light in place, just to cut the thread. Then discard that screw, because it has probably started to strip out already, and use a new screw to actually secure the light. It's unfortunate these were either not harder or made with a different head (like Torx or Robertson) but, is what it is.The price really can't be beat as trying to get tiny stainless screws like this is incredibly difficult from stores. If you order online somewhere, sure you're going to pay only like 10-20 cents per screw but you're going to get dinged with a $10+ shipping charge. Much better to get these off Amazon--300 screws for about the same price as just a few elsewhere. They show up at your door the next day and you have a lot you can use later. Even if you sacrifice a few screws as above or drop/lose some, you still have plenty left!I've yet to see how well the "stainless" will hold up to salt/winters but only time will tell I suppose. For now they are doing good.
Ellen in Missouri
Reviewed in the United States on April 24, 2024
Nice assortment of screws.
Michael L. Taylor
Reviewed in the United States on September 13, 2023
The plastic box is either missing or does not have a latch to keep the lid closed. I suspect the former. As a result, they arrived all mixed up and I had to separate them. I didn't feel like counting them, so I don't know if any were missing.
UnivLabs
Reviewed in India on July 10, 2023
The single package has all M2 standard screws, and the thread quality and strength are both satisfactory. It is pricey, but the quality is worth it.
AM_RC
Reviewed in the United States on May 10, 2023
I got these for my x-maxx 8s. The stock 2mm hex are difficult to remove when they get stripped.I replaced where i can with Phillips 2 mm screws from this set so the RC will be easy to maintain in the futureThere was a good variety of screws
J. Derryberry
Reviewed in the United States on March 18, 2022
I like this set and can foresee many uses for them...IF I can keep up with them. The problem is there is no latch on the box, so I'll have to either keep it taped closed or add a rubber band around it. I doubt the seller when send me the blue latch that I'm assuming this box should have, but if they see this and do I will definitely reconsider my rating.
Bill Youse
Reviewed in the United States on March 15, 2022
I needed four M2 screws to mount a NEMA 8 stepper motor. M2 is close to the hard to get US #2-56 so as a bonus this set will take care of future designs that require small screws. It has both flat and lock washers as well as nuts.The Philips heads work with a small screwdriver so no tiny hex key is required. The only length the set doesn't have that I would add is 10mm but 12 mm was what I needed for the stepper.
Gavin
Reviewed in Canada on June 25, 2020
Bought because screw holes for my computers fans in the bottom of the case were too small for standard fan screws. These were slightly too big to drop in and use the nut but actually groved the case screw holes to fit. A nice surprise that I didn't have to mess around in the back side of the case with the nuts... screw nuts, don’t report this review...Strong, plentiful, everything you’d want from a screw. Would buy again
Terri
Reviewed in the United States on June 24, 2020
Perfect size for what I need to do. Great not to have to try to find in hardware store.
Recommended Products
