Your cart is empty.
Your cart is empty.Product Description
for 1997-2006 Jeep Wrangler TJ
Hooke Road TJ Front and Rear Bumper Kit
Application: Hooke Road front and rear bumper kit for Jeep Wrangler TJ 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 models.
Easy Installation: These bumpers require no cutting, drilling, or modification. They are mounting directly to the factory mounting points, and all necessary hardware and detailed instructions are included.
Wrangler TJ Mid Width Front Bumper Features
Offroad Protection
- Features a more aggressive bull bar.(Detachable)
- Equipped with a license plate mount for your convenience in installing the license plate.
Built-in Winch Plate
- Built-in winch plate that rated up to 12,000 lbs.
- Ensuring you're prepared for any recovery situation off the beaten path.
Extra Lighting
- Features 2×25w LED spotlights.
- Enhance your visibility in bad weather and darkness.
High Strength D-rings
- High strength shackle mounts welded both inside and out with 4.75-ton capacity.
- Two 9500 lbs rated, 3/4'' D-rings w/rubber isolators included.
Wrangler TJ Rear Bumper Features
Rear-End Upgrade
- One-piece structure back bumper provides stylish and functional rear-end protection.
- Accommodates up to a 35" spare tire.
Hitch Receiver & Spare Tires
- Features a 2" standard hitch receiver, capable of supporting up to 4,000 lbs of gross trailer weight and 400 lbs of tongue weight (Class III).
LED Lights
- Equipped with 2×18w LED spotlights.
- Comes with a license plate mount. License plate light included.
High Strength D-rings
- High strength shackle mounts welded both inside and out with 4.75-ton capacity.
- Two 9500 lbs rated, 3/4'' D-rings w/rubber isolators included.
Heavy Duty Construction.
- The bumpers are made of highly durable flat steel that is designed to withstand huge amounts of load. Additionally, it comes with a premium-level textured black powder-coated finish for lasting protection against damage caused by corrosion while also providing an impressive look to your vehicle.
Simple Bolt-on Installation.
- Hooke Road engineered their Front and Rear Bumpers to be a direct bolt-on upgrade replacement for your original stock bumper by reusing the factory mounting points. There is no cutting, drilling, or modifications required for a simple straightforward install.
TexMan
Reviewed in the United States on July 13, 2024
Install was a breeze. Packaging is less than desirable. They pack the middle perfectly but the edges WHERE IT COUNTS is the first to get damaged in transit. Its a solid purchase and I'm glad I bought the set. I'll see if I can contact Hooke for touch-up paint.
BC
Reviewed in the United States on March 31, 2023
Bumper looks good, seems sturdy, has a nice textured finish. Instructions depict 10 bolt points, but my TJ only has 6. The bolts that come with the bumper are too large to fit through the stock frame holes and the holes will need to be drilled. The included fender washers are too large to use as the holes are too close together, causing the washers to overlap. I didn't notice until after I installed the bumper that there are imperfections in the metal and seams.
James
Reviewed in the United States on August 27, 2021
Went on well, look good and heavy duty!!
Rob Frame
Reviewed in the United States on June 20, 2021
Great people and product, very responsive to questions and went the extra mile to help a new Jeep owner upgrade!! Even provided pictures and solutions.The bumpers are amazing quality and overall easy to install. Great value!!!I would highly recommend them!!
Timmons T.
Reviewed in the United States on November 2, 2021
Bumpers arrived fairly quickly and they both arrived on the same day. Came with all necessary hardware for install. Front bumper was easy and can be easily done by yourself. But, the rear bumper is more easily done if you have someone to help hold the bumper in place while tightening bolts. Also, rear bumper only uses two bolts/nuts per side on a 2005 TJ.
Brian
Reviewed in the United States on October 8, 2021
When I removed the rear bumper from box (minor damage to bumper due to delivery company) the bumper looked very good. The instructions looked simple, 8 bolts. We put the 4 outside bolts on, then realized the gas tank has to be removed to install the driver side 2 of the remaining 4 bolts. Instructions said nothing about this. 97 TJ. I'll update after installing the front bumper. If it wasn't for the instructions failing to include gas tank issue, I'd give the rear bumper 5 stars.Update:Front bumper took normal time and was easy to install. Bolt holes lined up as they should, which I've had some bumpers not line up. Both bumpers looked better in person than in photos. For dropping the gas tank, Hooke Road responded fast and looked into it. Not all TJ's have this issue, mine does. So far, well worth the price and quality!!Winch install update:Very little room to install the winch while bumper is mounted, which it's always easier to install a winch before putting the bumper on. The fairlead needs to go on first, the bolt needs to be ran backwards (from the winch side) because the bolt hits the winch, at least Smittybilt. The bolt head is still mm from touching the winch, a little more room would be nice, and this is sliding the winch back in the bolt slots. Overall I'm happy with the bumpers, still would prefer not dropping the tank for the rear bumper bolts (2 of them). Ready to hit the trails and see how they hold up. Have not connected the lights yet to say how bright they are. Will be soon.
macwo1f
Reviewed in the United States on May 28, 2020
I ordered this combo package for a 2004 Jeep TJ to replace some tubular bumpers.The front bumper arrived first. The packaging needs to be reevaluated, as the sharp corners punch through the packaging causing three things: 1. Damage to the ends of the bumper, and 2. Loss of the hardware to secure the product, and 3. slight damage to rear lights and loss of retaining bolt.I reached out to the help desk, and they immediately sent replacement hardware and D rings, although I did not know about the rear light damage until I had the bumper mounted. I found a replacement fastener for the light, so no big deal.Both items are solid, but the rear bumper is pretty impressive in the thickness of the metal. It was much sturdier than I anticipated. The lights are acceptably bright and easy to wire into the relay I had for previous lights.They talk a lot about the layers of protection, but all layers were worn off of three corners, out of 4.I painted over with flat black, and no big deal, as it is a bumper...but if the packaging were redesigned, this damage would probably not occur.I had no problems with alignment to existing holes and would recommend them to other Jeep owners.They look impressive, and I am confident that they will hold up to significant impact.
wayneF
Reviewed in the United States on October 26, 2020
Arrived in separately Seemed packed well. the front bumper arrived 2nd there were a few spats where it had broke through the packing but no damage. Back bumper had holes for 10 bolts but my jeep only had holes for 6. bottom holes didn't align i will need to grind the holes to get them to fit. lights were wired into backup lights circuit they work very well seem plenty bright for the size. you will need a spare tire re-locator of some kind with this bumper.Front bumper went on easily all holes aligned with very minor adjusting. one AUX light mount tab was slightly bent it was leveled quickly with an adjustable wrench. Lights were tied in to the fog light circuit. they were much brighter than original fog lights. Over all very satisfied with these units. I haven't tried to winch anything yet. I will report back if I have any problems.
Recommended Products
$96.99
$ 40 .99 $40.99