Your cart is empty.
Your cart is empty.
Compatibility:
Designed for pools up to 40K gallons and under!
Replaces OE#: 520555 EC-520555
Notes:Check the salts
1,Normal Salinity: The normal salinity of a pool is between 2800-4500 PPM.
2,High Salinity: Salinity levels above 4500 PPM, high salinity levels increase the risk of corrosion and deterioration of pool equipment and environmental surfaces around the pool.
3,Low Salinity: With water salinity levels below 2800PPM, the IC40 will produce chlorine less efficiently. Adding salt is highly recommended.
4,Salt type: It is recommended to add table salt, soft water salt, industrial salt, etc. Do not apply mineral salt.
Why can't I use Mineral Salt?
Mineral salts are not easily broken down by the pool water and cannot be evenly broken down in all parts of the pool, thus reducing chlorine production.
Why is table salt recommended?
The powdered form is easily broken down by the pool water, resulting in better absorption and a more even distribution of salt.
Common troubleshooting and recovery methods！
●No flow
1. Determine whether the water flow direction is reversed.
2. Remove it from the pipe, power on the product normally, and choose not to enable WiFi.
3. Manually press the water flow switch and observe the status.
4. If "salt check" is displayed, it indicates that the water pump flow rate is too low.
5. If "no flow" is still displayed, it indicates that the water flow switch sensor is faulty.
●WiFi connection failure
1. Press and hold the less key for more than 5 seconds to reset the WiFi.
2. Reconfigure the network according to the configuration steps.
3. Make sure to send the correct WiFi name and password.
4. Ensure that the product has not been blacklisted.
5. If the connection still fails, it may be that the wifi signal strength at the location where the product is located is too low.
●Display Problems
1. If it shows normally during installation but turns white, flickers or snows after a period of useIf the display is normal during installation but abnormal phenomena such as white screen, flickering or snowflake screen occur after a period of use, as the normal operating temperature of the screen is between -4 ° F and 158 ° F (-20 ° C to 70 ° C), and the display becomes abnormal after overheating, after the entire machine is powered off, place the product in a cool and well-ventilated area. Once the temperature cools down, power on and it can be used normally.
It is recommended that customers install the product in a cool and well-ventilated area.Or install a shield to avoid direct sunlight.
●SCG Is Off is displayed and key and APP adjustments are invalid.
If the power supply voltage is too low, the product cannot work normally. Users need to check the power voltage supply. It can work normally after the voltage is restored.
Product Specification
Material: PE material
Suitable for: 40,000 gallons pools
Color Options: White
Brand Image:
Svipxoxo is a trusted brand in the pool, known for specific brand attributes such as innovation, reliability and customer satisfaction. With years of experience and a commitment to excellence, we provide high quality parts you can trust.
Troy Gardner
Reviewed in the United States on May 9, 2025
The media could not be loaded.
Michael Peiffer
Reviewed in the United States on May 30, 2025
It came in the mail when promised and met my expectations.
A. Shaffer
Reviewed in the United States on May 23, 2025
constantly gives “no flow” reading, despite water clearly flowing. meaning it’s not actually on and doesn’t do anything.plug & play replacement for ic20-40 if it actually worked. and the wifi works, but since it won’t actually recognize water flow it’s a $900 part that wirelessly shows water temp.
Roger L. Housel
Reviewed in the United States on May 23, 2025
Rating 4 stars and will update with some run time. Installation was seamless and connecting WIFI was easy. Unit is running as it should. I did cover the display, as previous reviews said the sun will make the display stop working. Otherwise I would recommend this replacement with a significant savings over the Pentair unit.
Joe Cox
Reviewed in the United States on May 23, 2025
Hooked it up and it worked for about 2 hours and then the screen when blank and could not get it to work.
Paul D Aubert
Reviewed in the United States on May 20, 2025
I have the same issue as the guy above, no display. I’m not sure it’s working either because the pool doesn’t seem to be properly chlorinated.
Recommended Products
$158.95
$ 73 .99 $73.99