Your cart is empty.
Your cart is empty.Product Description
Once mounted, the projector adapter will allow 20° of tilt and 360° of swivel so you can aim your projector at your screen.
The Kanto P101 is designed to fit most projectors and is commonly used in boardrooms and offices but is also ideal for home theatre applications.
Without the extension tubes, the P101 sits 3” from your ceiling. With the extension tubes, you can extend the length from 9” to 12”.
The P101 is shipped with four mounting arms attached to the tilt head, and four longer mounting arms are included in the box.
Nico
Reviewed in Germany on January 29, 2025
An sich ist es eigentlich ganz gut mich stört nur das die Halterung so ne halben Zentimeter Spielraum hat beim Gelenk deswegen hab ich ewig gebraucht den Beamer wirklich Grade an die Decke zu bekommenBeim nächsten Beamer würde ich wahrscheinlich eine andere kaufenAber das Produkt ist nicht komplett schlecht
Michael MacGuinness
Reviewed in the United States on March 7, 2024
Very neat and tidy looking. Low profile. Holds adjustments. Easy installation.
Christian
Reviewed in Germany on February 3, 2024
Die Beamerhalterung macht einen wertigen Eindruck, der Aufbau war einfach. Es lagen multiple Schrauben für die Beamerbefestigung bei, leider passte keine der beiliegenden schrauben bei meinem Beamer, wobei ich nicht sagen kann, ob mein JMGO Beamer norm Schrauben hat. Was man leider erst merkt, nachdem man die Löcher in der Decke hat und den Beamer befestigt hat ist, daß die Klemmung nicht ausreicht, um die Position des Beamers zu sichern. Der Beamer verkippt immer, obwohl der Schwerpunkt getroffen ist, alleine das "Gewicht" der HDMI Kabel reicht dazu. Ich habe keinen Weg gefunden, die Position zu fixieren. Daher geht er zurück und ich habe unnütze Löcher in der Decke.
max
Reviewed in the United States on December 1, 2023
I only write reviews for excellent products or pieces of junk. This mount is excellent.I have a large,17 lb projector and needed low profile for a low ceiling. This mount delivered.It’s well built and VERY customizable. Bad reviews are from user/install error, period. Take your time, find the center of gravity on your projector, tighten down your ball joint well, and use the set screws for fine tuning….Maybe a little overpriced at $70, but I found it on sale for $55 and it’s worth every penny!
Customer - AMZN
Reviewed in the United States on October 5, 2022
I liked it because the clearance from ceiling can be as low as 3 inches. An imbalance in weight (I have Optoma UHD50x with lens to one side of it) can cause it to tilt. I have to ensure the bracket is sort of centered on the projector to make it stable. Otherwise it is easy to install and use.
Customer
Reviewed in the United States on March 27, 2019
I found this projector ceiling mount fairly easy to install. The problems that I had were related to trying to positions the legs on to the Optoma UHD60 projector. They provide 2 medium (already assembled on the mount), 2 short and 2 long set of legs, well the 2 longs are too long and the 2 short are too short. I wish they had included another pair of medium legs as this would have made it a breeze to center the mount on the UHD60 projector. I had to try several combinations until one worked. Everything else went fine until the projector was on the ceiling, then frustrations starts. The first thing I noticed was that the swivel part does not hold the position. It kept tilting towards the left which keeps the projector slightly out of level and since the UHD60 doesn't have keystone correction this is a critical point. After several removals and installs, mind you while you are doing all these adjustment you can easily, if not careful, drop your projector if you are doing it by yourself. I finally got it as close as I could of being leveled but a week later the projector is starting to lean to the left again, ugh! It seems impossible to find the sweet spot and lock down the swivel part while mounted in the ceiling and the projector is on. Another thing that was annoying was trying to put on the final 2 screws to completely secure the mount portion connected to the projector. One of the 4 tiny Allen head screws stripped, because I had to remove and install so many times. The mount seems solid and has a lot adjustments, flexibility and extra screws. I like the concept but the final adjustment is a pain in the rear. If only the final adjustment could have been done while mounted in the ceiling it would have made it a 30 minute job instead of 2 hours.
Antonio Ricardo
Reviewed in Spain on February 18, 2019
Envio rápido. Material confirme o descrito.
TJW
Reviewed in the United States on December 30, 2019
I needed a mount for about 6-8 inches from the ceiling and this was the closest I could find. The mount come with many options for mounting arms and screws to make attaching the projector fairly easy. The problems started when I started to connect everything to the ceiling mount. First off the extension tube's adjustment holes were not properly drilled or aligned, the large mounting screw did not want to go through both sides of the tube. Next there were set screws to put in the tubes to keep them from moving, the thread of the mounting tube ended up stripping out. Finally there are two screws to thole the projector mount into the extension tubes, the holes for these screws are filled with plastic so the screws can not be threaded in.I did not see many options in the length I needed, other mounts were all very close to the ceiling or way too long and this mount was about my only option. Hopefully everything stays in place and I dont ever have to move the projector. Overall I am disappointed with the quality of what was received since so many parts did not want to work properly.
Client d'
Reviewed in France on December 11, 2019
Très agréablement surpris. Livraison rapide, emballage propre, et contrairement à mon modèle précédent très... Mais alors très solide. Mon projecteur pèse 14kg (oui c est un gros 4k de home cinéma donc bien plus lourd que les projo de bureaux). Montage en 7min chrono. Top... Pas d'autre mots. Accessoires pour différentes tailles de fixations et plein de vis suivant longueur de pas dans le projecteur.
Emmanuel Garcia
Reviewed in Mexico on November 3, 2019
Muy funcional
Leo
Reviewed in the United States on January 14, 2018
perfect, i do a lot of systems and this one will do for any situation, so if you don't know what you exactly need this has it all.
Customer
Reviewed in the United States on May 28, 2017
I was worried that this mount will not fit my projector which is only 30% of a normal size (LG PF1500). But thanks to a generous set of spare parts included by the manufacturer, it took me about 5 minutes to fit it perfectly. The mount does the job and I like that it is only 3" tall. See the pictures how I installed the projector with this mount.
J Montes
Reviewed in the United States on June 16, 2016
Super Easy to setup!
Recommended Products