Your cart is empty.
Your cart is empty.KnuKonceptz KNF-60 in 2 way power and ground configuration
Parts included: Four 0 gauge fittings, two 4 gauge fittings, 4 Mini Links, 30Ax2 fuse (60A load) and 60Ax2 (120A load)
The KNF60 is capable of many configurations and completely expandable. However ONLY the parts listed above are included to create the two way power AND ground in one chassis. Complete manufacture description of all options below:
The ultimate fuse distribution block capable of 5 unique installer defined configurations:
2 Way Power AND Ground Distribution
3 Way Fuse Distribution
4 Way Fuse Distribution
2 Way Fuse Distribution + Inline Fuse (Rear Battery Installation)
3 x Inline Fuse Holder for multiple cable runs
The KNF60 uses 6 isolated ports in its patent pending design. Each is then linked, fused, or left open to configure the block for your application's demands. Utilizing three platforms to fuse or link these ports makes the KNF60 unlike any distribution block before it. Each output has room for two links or Mini-ANL fuses allowing up to 300A of protect per circuit!
Each port on the KNF60 is capable of accepting 0 gauge or 4 gauge power cable depending on the fitting used. Now power for the largest installations can easily be routed through one block!
David Wilkinson
Reviewed in Canada on March 4, 2021
Top notch.....as is everything KnuKonceptz sells
Joey
Reviewed in Canada on January 13, 2021
Beware read add fully. I Did not read add clear enough when I placed this order. Block comes with 4 connections for 1/0 & 2 connections for 4awg.I had to pay in addition to this over $50 with shipping from manufacture to get the right fittings I needed to accept 4 4awg & 2 1/0 to fit this block.
Bill in NB
Reviewed in Canada on June 3, 2020
If you have 2 amplifiers that take 4 gauge power and ground. Do not buy this. This unit has four 0 gauge and two 4 gauge fittings. The seller tried to tell me I "could" put the 4 gauge into the 0 gauge fitting and it would work... Would not even ship me the parts I needed to actually use this. It is useless as is.I cannot even think of a setup that would use block as is. 0 gauge in for power, 0 gauge for ground. Most amps take 4 or 8 gauge.
john mohr
Reviewed in the United States on March 25, 2020
Brilliant design,so many configurations, ground and power in 1 block to make install look clean,compression fittings in multiple gauges for perfect Connections.Looks good with the clear or top housing. absolutely love this distro block!! This a must have for me!! Have a lot of equipment in my truck and didnt want 2 or 3 distros powering things...1 block,very clean.. . Love it and highly recommend!!
juan miguel serrano
Reviewed in the United States on July 20, 2019
Convenient
Smd11873
Reviewed in the United States on July 15, 2018
I like it but after 3 years of owning it. I have moved it around a couple times and its not as easy as this type of thing should be. If your using 0 gauge wire and trying to get a lot of power transferred..This might be for you. Its very time consuming to remove the connectors and then re-install them.If your an installer then this is probably more attractive. I found it extremely time consuming and required a lot of effort to fully seat the connectors and if you push amps hard. I had some of the connector bolts break off in the blocks after heating up and cooling down. In the end, for single install personal use. Might not be the best option. For car audio installers, very versatile and a great option with flexability.
Chad
Reviewed in the United States on February 11, 2018
This thing is awesome. I have 4 amps in my car and this is a great solution to hooking them up. Very nice. Only thing I would like to see is a plastic plug for the unused port but not big deal.
CriticalMach
Reviewed in the United States on February 22, 2017
Still rocking it in my truck. Anything I've ever had from KnuKonceptz has been excellent.
Michael
Reviewed in the United States on November 20, 2017
Best disto block I have used. You can reconfigure this block to be power / ground, power / power or all ground by simply moving the links or fuses
Sebastien Bisson
Reviewed in Canada on November 30, 2016
It was delivered quickly, beware that this comes with four 1 gauge compression fittings and two 4 gauge compression fittings. You can order more compression fittings from the manufacturer website below.[...]
christopher cline
Reviewed in the United States on August 12, 2015
Very sturdy, great products from KnuKonceptz
Machine
Reviewed in Canada on November 29, 2014
really nice to work with, i'm using it in my 97 jeep grand Cherokee limited to power my 1200watt amp and a 600 watt amp, easy to use, keeps thing clean and neat ,what else can i say plug and play. PS play safe!
Eric H.
Reviewed in the United States on April 28, 2014
This is built very solid, worked great since i have 2 amps powering my speakers. I definitely would recommend to anyone
Recommended Products
