Your cart is empty.
Your cart is empty.Product Description
Why Choose Our Laser Engraver Enclosure?
- True Fireproof Technology: We tested burning for 5 minutes without any problem
- Noise Reduction: Extremely tight seal with double-sided silicone coating
- Isolation of Smoke & Odor: Isolates 99% of dust particles, fumes and odors
- Waterproof & Dustproof: It can act as a dust cover to protect the laser engraving machine. To clean, simply wipe with a damp cloth
- Extra Large Size: 27.5*27.5*18in, the taller design also allows for the placement of rollers to suit your needs
- Ergonomic Viewing Window Design: Tilt 30-degree angle, the most suitable angle to observe the operation of the laser engraver
- Eye Protection: Double-layer light filtering PVC material to reduce blue light from laser engraving
- Wide Applicability: Compatible with most carving machines on the market
- Easy to Install: Can be installed in minutes without any additional tools
OUR ADVANTAGES AT A GLANCE
Eyes Protection
The protective part of laser engraver cover glasses is made of double-layer light-filtered PVC material, which can reduce the blue light produced by laser engraving and protect your eyes.
Air Outlet Design
The 3.26" diameter exhaust port (pre-installed) can be connected to a 4" pipe and a 4" exhaust fan, ensuring a safe and healthy laser engraving environment. (Note: Exhaust fan and pipe are not included)
Fireproof Material
The laser engraver enclosure is made of high quality double-sided silicone coated Plexiglas fiber that can withstand temperatures up to 1832°F (1000°C) and is resistant to instantaneous high temperatures.
Waterproof
Not only is this laser enclosure fireproof, but it is also highly waterproof to prevent the laser engraver from getting wet with water.
Dustproof
It can also be used as a dust cover to prevent the engraving machine from being covered with dust and to facilitate storage. For cleaning, simply wipe with a damp cloth.
Zipper Design
You can change the laser engraving material or adjust the laser module settings by quickly unzipping the zipper without moving the laser shield.
Forever111208
Reviewed in the United States on March 20, 2025
Easy to install and workìs great
Cheryl
Reviewed in the United States on April 23, 2025
Works nicely..
Rover100
Reviewed in the United States on October 23, 2024
Arrived well packaged and in excellent condition. Easy assembly and will fit a wide variety of small laser engravers.
Galo Encinas
Reviewed in Mexico on June 13, 2023
Es muy buena opción para las máquinas nuevas para casa de corte laser solo verificar bien que si te de las medidas de tu maquina.
Free Bird
Reviewed in the United States on May 10, 2023
Works as advertised, only draw back is you have to purchase your own fan and ducting. The fitting supplied by the manufacturer fits a standard 3" dryer flex hose to use to remove the smoke from the laser. There is a 80mm fan I purchased from Amazon that bolts up ( AC Infinity AXIAL 9238, Muffin Fan, 120V AC 92mm x 38mm High Speed, for DIY Cooling Ventilation Exhaust Projects) but you will need a inline booster fan to help remove the smoke fast enough (VIVOSUN 4 Inch Inline Duct Fan 100 CFM, HVAC Exhaust Ventilation Fan with Low Noise for Basements, Bathrooms, Kitchens and Attics, Silver ).
Kindle Customer
Reviewed in the United States on November 15, 2023
Most diode lasers don't have a cabinet of any kind, and that is very unsafe! This material that forms the walls is (basically) fireproof, and the clear plastic front/top piece does have some light filtering ability, but I wouldn't depend on it. Use good glasses, depending on the type pf machine you have.It has a built-in 4" exhaust port for a smoke exhaust, but you need to get a fan and pipe, etc. The clear viewing window provides super good visibility, and is better than any of my other 3 CO2 lasers with steel cabinets. Once it is zipped up, there is little, if any, smell of smoke.This enclosure outperforms a standard CO2 enclosure in every way, and you can use it with another laser if you upgrade or something goes "POP." One caution: I have a 10 watt Phecda which can burn up to 400mm by 400mm, and it just barely fits! Be careful to measure everything to make sure you'll be okay in this regard. If only for the peace of mind it will provide, this is a great investment in safety.
Mark davis
Reviewed in Canada on January 30, 2023
I am still able to smell the burning woods and acrylics litte disappointed as all reviews I watched said they could not smell anything. Also the vent is not 4inch its more like 3.5inches. They should not advertise false info.
J & C Gabel
Reviewed in the United States on August 28, 2022
Pro:Quick and Simple Assembly (good instructions)Stable and FunctionalAmazing Clearance for Camera's, Lights and RisersPerfect Fit for the Xtool D1Con:Weird Dimensional Air Vent Size (I removed it, cut a backplate and 4 new holes for a 4in adapter)No cable hole (with Velcro flap)Plastic Window is not Laser Protection GradeLime Green accents...
Customer
Reviewed in the United States on December 27, 2022
Super happy with this enclosure. It was super easy and fast to put together. After looking around and doing research this was the best bang for the buck. Plus, it's fire resistant! We got this for our xtool D1 Pro 20w and it works perfectly. It has allowed us to bring the laser inside to work versus being out in the cold 🥶.One note for anyone looking to get one. The exhaust port is 3 inches. So make sure to get the right ducting size as tape does not stick to this thing for even a temporary fix haha. I paired this with a 6 in inline duct fan and a stepdown for the ducting size difference. We pipe this out an old unused cat door. 🤣Again great product ⭐⭐⭐⭐⭐
Jody Herc
Reviewed in Canada on December 23, 2022
It is a decent product for the money. Disappointed it did not have a full bottom it was just a slipcover. Helps with the smoke and smells somewhat. Easy to assemble. Ours was missing pieces but still managed to patch together. Waiting for pieces to get shipped.
Devin J.
Reviewed in Canada on November 30, 2022
It works as described but the exhaust port really should be sized to bolt a PC case fan to it. And maybe have a kit option available with a fan and hose. Good luck finding a 3.25 duct and fan for it. It’s not 4” by any means.
Jeff Hines
Reviewed in the United States on October 14, 2022
I bought this cover for smoke extraction for our desktop laser, dims were perfect as the Atomstack Pro10 requires a pretty good foot print. The unit was packaged nicely and assembly was a snap, unfortunately the craftsmanship on the cover doesn't follow suit. I noticed the zippers looked sort a whimpy and we would need to be careful, but the game changer was the short hems and bad seams. The front LH seam is already separated @ about two inches down the vertical face. If this was a $30 cover I would repair and finish my job, but this thing was too much money. I will build my own for $80. This thing is going back. Pretty disappointed as it ticked a lot of boxes. Oh well, nobody got hurt. Good luck. Have a good day.Update: I returned the above unit immediately after assembly, and after further consideration decided to try again. Glad I did. The replacement was of a much better caliber thru-out, glad I did the return and replacement. The exhaust port is a funky size but I had already made an adapter ring out of MDF so I could use my 4" exhaust fan. So my new rating is 4.5. Just do it, not a lot of options for the Atomstack S10.
Recommended Products