Your cart is empty.
Your cart is empty.Product Description
Temperature display
Operating temperature power and signal supply at a glance.
Built-in air assist
With built-in air assist to get clean-cut edges, improve cutting performance.
Red cross-presitioning line
Red cross-presitioning line precise positioning
Fixed focus lever
Equipped with fixed focus lever, you can easily adjust the fixed focus distance.
John G.
Reviewed in the United States on March 21, 2025
Delivered on time, came very welled packaged, just as seller described.Unit was easy installed on my Longmill cnc.This unit is way more powerful than my 7 watt.Cuts through ply, MDF, Acrylic, and pine as advertised on web site.I may buy their smaller laser just for engraving tile because this one is a little big.I have cut acrylic key chains, words for crafting, engraved plywood,cut 1/4 ply for a prayer cross.I bought the comgrow Air Assist kit to provide air assist.
Shawn Young
Reviewed in the United States on February 2, 2025
Just installed this on my Falcon CR10 laser engraver (changed from 10watt setup to the K30 laser head)Definitely using the provided power supply. This unit is for DIY machine setups. The included driver board should take care of any connection you need to get this unit going. For the most part it was plug and play with my setup as far as wiring goes. My challenge was mounting the sliding bracket to my existing frame. The provided bracket has more than enough holes and slots to accompany your existing setup. Personally, I found the M5 screw heads wouldn't fit into the slotted sections and the M4 screw heads that i used to attach would not countersink enough to clear the sliding bracket on the head so there were some slight modifications made to make things work.It would have been nice to have some zip ties and maybe a few random fasteners that would work with the provided hardware.Overall i think i made a good purchase. The blue anodized finish matches the Creality frame which was a bonus.One gripe i have thus far is simply having to turn on/off the laser head separately from the gantry but a power strip handles that for now.
william tuttle
Reviewed in the United States on January 17, 2025
It was easy to install and it cuts and burns as described
Keith
Reviewed in the United States on April 28, 2025
I was part way through a laser project when the XTOOL 10W diode laser failed. Read about this one, and took a chance. I am very impressed with the output of this laser. I can now cut 3mm Basswood in one pass at 60-70% power. Prior, I was making 4 to 5 passes at 100% to cut same 3mm Basswood. It is a little heavier and larger than the XTOOL 10W. However, the frame does seem to support it well.
Kveldulf
Reviewed in the United States on April 14, 2025
Works like a champ on a CR falcon with some minor modifications to the machine. I had to drill some holes in the machine bracket to accommodate for the new mounting bracket, 3d print a spacer to account for the larger module, and add a switch to turn off the PWM signal entirely when framing a burn job - the framing cross hairs only show when the power is set to 0, but Creality's stock firmware is set to 5, enough to lightly engrave the perimeter on leather or wood with the more powerful module.Make sure to account for the 21mm offset in lightburn if you're sending via Gcode on a sd card, else it'll try going past zero.
STurner
Reviewed in the United States on March 15, 2024
Will not work on certain models of xtool and they know it. They said they will send the parts to make it work. Waited almost three weeks and got the wrong parts. They then wanted $40 for the parts which would have taken another week which would have put me out of the return window. I returned it.
User2000
Reviewed in the United States on December 22, 2024
Going from a 5W & 10W to this 30W, It's fast. Cut the power back a lot, and speed it up.
Tam
Reviewed in Canada on December 11, 2024
I got Laser Tree K40. The laser emit 100% all the time. all the troubleshooting suggested on their website have been exhausted.Their video showed that you can change power output. This is not possible after all tge troubleshooting. I send them many messages through their website. No response whatsoever.
1ockdown
Reviewed in the United States on January 9, 2024
The media could not be loaded.
Doug Bryant
Reviewed in Canada on January 11, 2024
The K30 is exactly as described, a huge step up from my old 7watt. The only issue I had were to do with shipping, which was was adequate at best. The laser spent 5 days in Canadian customs before LaserTree let me know I had to come up with extra $ even though I'd already paid Amazon extra to cover custom & duties on the initial order. The Laser kit was missing one cable but I contacted LT and they sent another cable kit from China so added another 2 weeks until I could fire it up. Documentation is a 5 out of 10 but FB groups are good with support. I'd recommend this as an option to going to a CO2.
Recommended Products