Shopping Cart

Your cart is empty.

Your cart is empty.

Marcy Universal Auto Windshield Rain Sensor (Lens) 2 Part Gel Kit See Details

Free shipping on orders over $29.99

$14.75

$ 6 .99 $6.99

In Stock
  • Marcy Rain Sensor Lens Gel Kits Multi Use 4ml 2 Part Kit
  • Buyers see Additional Critical Details below at the bottom of page for this Professional Certified Use Product
  • Cures in under 4 minutes at 70°
  • This Product DOES NOT Work for all Applications see more details below
  • Rain Sensor Bracket Must Still Be attached to windshield if Bracket is not attached to glass this will 1st need to be reinstalled prior to use of this product. see below. This product is for the replacement Lens only and iIS NOT Desinged to hold the Rain Sensor to the windshield. The bracket or mount is for that


Marcy Adhesives Made in the USA This Universal 2 Part Quick Cure Clear Gel Kit is designed to Replace the Sensor Pad/Lens (Clear Lens) Located between the Sensor and Windshield Glass. Gel Lens is Required for Proper Rain Sensor Function The Gel Lens Functions as the needed Lens between the Rain Sensor and the Windshield. (This Product is the Lens Kit Only and is not the Rain Sensor) Buyers Note:* This product IS NOT designed to attached the Pre-mounted Bracket to the Windshield. If bracket and sensor has fallen away from the windshield we highly recommend seeing a local Auto Glass Company to have the bracket 1st remounted Prior to Using this Product. If your Windshield has been replaced and the Lens Pad between the Sensor and Windshield was not replaced then rain sensor will not function or will not function properly. We recommend this be checked 1st, if there is an issue with function of your rain sensor as this would be a inexpensive option to replacing the entire Rain Sensor. Buyer Note* This Product is a Professional Use Item for Certified Auto Glass Technicians and will only be warrantied when professional installed. They are familiar with this product and its applications as well as in removing Rain Sensors, Brackets, and or Interior Rear Mirror, and Covers Cure time and Install instructions provided Buyer Note:* This Product DOES NOT WORK for all Rain Sensor Applications. Knowledge of this product is required. Once this Item has been opened it can not be returned. If DIY Purchasers Buy this Item you Assune All Risk with regards to its proper use. We are hear to help! Please contact us directly with any questions and or applications.


Arnold Cruz
Reviewed in the United States on May 7, 2025
This was the perfect product to ensure the working state of my Peugeot 2008 rain sensor.
Tony
Reviewed in the United States on May 24, 2025
This kit is absolutely essential to install a rain sensor. In my case, my car is Lexus RX350 2013. To install it, first you need to have a brand new rain sensor tape which you must purchase from dealers as aftermarket or whatever knock-offs may not work. Next clean the surface on both sensor and windshield carefully, make sure no dirts stay on them. Then, use the kit, take a liquid and do it quickly to apply on the surface of sensor and tape and put in the correct position. Keep it like this for several minutes as it will dry quickly. There are some videos on YouTube that will help you in the procedure. This kit is very helpful and must have to do the job. My rain sensor works perfectly after I do the job.
steve
Reviewed in the United States on February 22, 2025
"This is one of the best products I’ve ever purchased! After replacing my windshield, I had issues with my car’s sensor. The windshield company tried everything, including adding pads, but nothing worked. I ordered this product, followed the instructions, and within five minutes, my sensor was working perfectly! Everything functions like a champ now—hands down, a great product!"
Nolan Ring
Reviewed in the United States on February 21, 2025
Worked great on my 2019 f-350. Before, my auto wipers wouldn’t work at all and noticed that the gel was all oxidized and gross. Carefully scraped it off, applied the new and it works great. Definitely wait a few minutes for it to start to cure before applying the sensor to the windshield so it doesn’t run.
Micky B. Christian
Reviewed in the United States on July 15, 2024
This worked Great. Just remember, it begins to cure within 4 or 5 minutes so the fluid in the mixing nozzle will set up while you are applying the gel pad to the sensor. If you are lucky like I was you will be able to press hard and pass it through the mixing nozzle and get the newly mixed gel to come out.The product is not a one-time use however the nozzle is if you don't flush the partially mixed gel. or if you had multiple nozzles.
LightForAll
Reviewed in the United States on December 4, 2024
The media could not be loaded.
rainiara
Reviewed in the United States on December 23, 2024
It does not stick to the windshield, so for my bmw E90 it was useless.
Rich W
Reviewed in the United States on August 9, 2022
Followed the instructions to the letter and it worked perfectly. I’m left with 2/3rds of the material if I ever had another need, but it only came with one tip.
Recommended Products

$10.76

$ 4 .99 $4.99

4.6
Select Option

$30.45

$ 14 .99 $14.99

4.4
Select Option