Your cart is empty.
Your cart is empty.Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner's manual.)
David Miller
Reviewed in the United States on April 30, 2025
Junk, started leaking air where shock was pressed to form around the rubber air bladder. Started leaking within 3 days of installation, never went over 100psi.
Customer
Reviewed in the United States on August 9, 2024
For my 2014 Dodge 1500 rear replacement. Pro tip, get yourself a 21mm wrench, heat that puppy up and put a 90 degree bend in it about 2 to 2 and a half inches away from the open end side. This will allow you to access the top nut that you can get to without removing the bed. Spend the money on the wrench unless you have some serious attachments. 21mm Milwaukee 1/2 inch impact and a 21mm wrench, 22mm to take the lugs off and a 9/16 inch wrench for the air fittings. My ride is smooth!
Joe
Reviewed in the United States on July 25, 2024
Great shock only thing is keeps losing air after few days Iv check it over and over and all fittings can’t find leaks but still works just gotta fill them up b4 I tow something heavy
Customer
Reviewed in the United States on May 5, 2024
good prouduct. glad i bought the extra air line! on a ram the top bolt was abear to get off i had to grind a 21 mm socket down to a thin wall to be able to get it down over the nut. it went very well after i did that!
Marshall J. Young Jr.
Reviewed in the United States on March 7, 2024
It took about 2 hours to install. Our RAM had a very hard to get to bolt. Two people made it easier. Works as advertised.
MrDrew77
Reviewed in the United States on August 15, 2023
Replaced the OEM shocks on my 2011 Ram 1500 and what a difference they made. Installation went quick, used a 22mm Crows Foot w/ multiple extensions for the upper inside nut at the top, worked great (13/16" or 21mm is would be a tighter fit).
Reviewer
Reviewed in the United States on May 10, 2023
The shocks seem durable and well made but the air line nuts are made of cheap plastic and have a tendency not to hold the airline under pressure very well, not to mention the T fitting ( air filler) is also made of plastic and it's easy to cross thread, difficult to fill and not very durable.
Harold
Reviewed in Canada on August 4, 2022
Very good
DaveM
Reviewed in the United States on July 9, 2022
Not enough sir line included with kit to run hoses to back of my Ram. Had to buy another install kit. Install went ok and aired up to 60 psi and it held for the night. Ran for several weeks st 30 psi and rode nice. Lost pressure after a couple days. Load truck and hooked up trailer and headed out for 1800 mile move. Second day on the road won’t hold air for more than one hour. If I make it to Michigan I’ll have these removed and install sir lift air bags inside the coils. Unless I find a better option. Every Monroe shock absorber or strut I have installed has failed soon after. I swore I’d never use them again and now I’m paying the price for forgetting.
D
Reviewed in Canada on September 14, 2021
They were ok to install but had to get more air line... Linea that came with it to short for a truck
a anderson
Reviewed in Australia on August 13, 2021
arrived on time had to change rubber bushes as larger diamiter bolt hole in new shock no madger problem
Navi
Reviewed in Canada on January 16, 2020
These where awesome they take the load and when I’m just driving around I can adjust them to ride soft
Ric M.
Reviewed in Canada on May 23, 2019
Exactly as described. Easy install. As other reviews have stated kit really needs about 12 inches more of airline! Have nicely tightened up the rear suspension for trailer tow.
Recommended Products