Your cart is empty.
Your cart is empty.Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Customer
Reviewed in the United States on September 23, 2024
Just like factory for 2003 toyota highlander
Peter W. Tong
Reviewed in the United States on September 17, 2024
Installed these in a 2010 Toyota Venza.These Moog parts are far superior to the original Toyota sway bar links. They also don't use the crappy hex key factory method of securing the inner joint from turning when torquing things down.Everything is beefier. It seemed also to me that the length was just slightly greater than stock, which would slightly increase the rate from the factory sway bar.
John Lin
Reviewed in the United States on November 19, 2024
2004 Toyota Camry 2.4 L. The sway bars were a perfect fit. You will probably need these if you have never changed your rear sway bars. The old ones are impossibly to take out if they are rusty since the alan wrench won’t be able to hold the joint from spinning as you unscrew it. You can see in the picture that I had to cut the screw where the old sway bar mounted on the old strut. Luckily these Moog sway bar end links have a place on the joint for a wrench end that can be used if you ever need to take these out. Like how they are also greasable.
Rich.L
Reviewed in the United States on April 5, 2024
The same Moog sway bar links sell for almost twice as much at Auto parts stores.
Wingo
Reviewed in the United States on September 16, 2023
Replacing the sway bar links is almost a necessity in the rust belt given the old links are unlikely to come off without using a cutoff tool. These links are very well made and include a grease port. Notable is that the manufacture while providing a small amount of grease at the factory, expects the installer to fully grease the links during installation.Hint: Grease the link before installation instead of having to maneuver the grease gun's hose into an odd location.
Chance Hastings
Reviewed in the United States on August 1, 2023
These rear stabilizer bar links, are IMO better than the stock ones. I have an 02 Camry. I appreciate they come pre-greased. On the Camrys 02-06, these are interchangeable on both sides, so if your looking for a left or right, it doesn't matter, they are not specific to either side. One of mine went bad, and I got two, since the car has 280k, other one most likely on its way out too.
Thunder
Reviewed in the United States on July 26, 2023
Fit perfectly on 03 Highlander. Great design and quality, easy to install and remove.
Sway Bar
Reviewed in Canada on July 26, 2023
Fits as it should
Ivan K.
Reviewed in Canada on September 22, 2022
it installed very easily, and only time will show how good or bad the quality was.the only thing that made me concerned - I didn't see the rubber part that covers the joint itself to be releasing the excess of the grease if/when you try to pump a few pumps into it.
Steven
Reviewed in the United States on August 10, 2020
I am a Moog fan. I try to replace any steering/suspension part with Moog. I have a few vehicles all with Moog sway bar links. Anything I can get Moog, I try to do. They are a little more expensive in SOME cases, but always better quality even when they're comparable. Fits the 2003 Camry LE. They are actually thicker in the body than the stock parts. That is much better in my book. They fit the same as OEM but also feature a built on nut on the neck under the head for holding which is much easier and quicker install and uninstall than stock. They're also greasable which is another win.
Recommended Products
$65.00
$ 25 .99 $25.99