Your cart is empty.
Your cart is empty.Product Description
Mornajina Automatic Drip Irrigation Kits Garden Irrigation System with Mister Filter
- Mornajina drip irrigation parts are widely used in shopping mall, park, artificial landscape, factory, workshop dry area, can effectively suppress dust, deodorize and improve the environment.
- These spray accessories are also mainly used for automatic watering system, drip irrigation system, misting cooling system, cooling, deodorization, watering, dust removal, gardens, irrigation systems, courtyards, gardens, swimming pools, playgrounds etc..
9 Kinds of Drip Irrigation Parts, Perfect for a Comprehensive Irrigation System
- 1 x Calcium Inhibitor Filter;
- 1 x 66FT 5/16 inch Irrigation Tubing Hose, 6mm/0.24inch ID & 8mm/0.31inch OD;
- 20 x 8.3 inch 360-degree Bendable Support Rod with Brass Mist Nozzle;
- 20 x Misting Nozzles Tee, 8mm/0.31inch OD;
- 1 x 3/4 inch (25mm) Faucet Adapter (One side connected to 3/4 inch (25mm) Standard water tap, and the other side connected to 8mm tubing pipe);
- 40 x Cable Ties;
- 40 x Saddle Clamps;
- 1 x End Plug;
- 1 x Pipe Cutter.
Calcium Inhibitor Filter, Prevents Scale Buildup from Clogging pp, Effectively Removes the Odor of Chlorine after Misting
- Our Mister Filter contains granular activated carbon, KDF and resin. Highly efficient multi-stage filtration with the use of Kinetic Degradation Fluxion (KDF) and Advanced Granular Activated Carbon (GAC) technology.
- Attach filter to 3/4" standard garden hose fitting, it would automatic irrigate flowers, gardens, pawn, and saves time and water. The working pressure 35-100PSI.
- These durable inline filter can be used for municipal tap water for about 3-6 months.
8mm/0.31inch Misting Nozzles Tees, 360-degree Bendable Support Rod with Brass Mist Nozzle
- These support rods that can be bendable and adjusted 360 degrees, very convenient to adjust the place to be sprayed and specify the direction.
- Each brass mist nozzle and support rod can be removed from each other for easy cleaning and preventing clogging.
- By twisting nozzle, you can adjust the water volume.
- Place the drip irrigation system on the ground, fasten it to a fence, or hang it on a flower bed in the air.
Wide Application
1. Cooling function (Temperature Reduction).
By atomizing water into tiny droplets, these droplets evaporate rapidly in the air. During the evaporation process, these droplets absorb a large amount of heat, thus lowering the temperature of the surrounding environment.
2. Increase humidity (Humidity Increase).
These misting nozzle kit can increase the humidity in the air. It is suitable for greenhouses, gardens, farms, indoor plant care and other places.
3. Air Purification.
Atomized water droplets can adsorb dust, pollen in the air, make them settle down, and reduce the concentration of particles in the air to improve air quality.
4. Fogging system.
These Atomizing Mist Nozzles Tees are widely used outdoor restaurants, terraces, gardens and other places to help reduce mosq harassment.
5. Automatic Drip Irrigation.
These drip irrigation parts can deliver water directly to plant roots, allow the plants to absorb water more fully and grow healthy. Besides, it can help save water.
C. Ramsey
Reviewed in the United States on May 9, 2025
I absolutely love what the system can do. I'm going to customize it to fit all of my hanging plants on my front porch. I've laid out the parts and looked at it. As soon as I bring out my plants next week I'm excited to get this put up and together. I will add more photos when I have it. It was a little bit slower than it expected as far as shipping, but that's okay. My plants weren't coming outside yet. another reviewer did a great job putting a video out, I highly recommend you watch it. She does show that they're really aren't any steaks to attach these to. They give you little ties that you can attach to the hanging parts of your pots. But you may need steaks or something else to prop these up if they are going to be freestanding. Her video is excellent and I highly recommend it. I also recommend these, with brass fittings on the end, how could you go wrong?
Eric
Reviewed in the United States on May 27, 2025
I recently ordered and just installed this irrigation kit in my garden, and it has been a game-changer. The 50 ft of tubing was plenty for my needs and I only needed 8 of the 15 adjustable mist nozzles to cover my 8 plants.One super convenient feature is the quick-connect tees. The friction fit allows for easy installation and removal of the tubing without leaks, it also makes adjustments and fine tuning your tube lengths/nozzle positioning super easy. The nozzles themselves are well made of brass and can be bent to direct water exactly where it's needed and in the direction that you want to point it. For my use, I use them for flowering plants that are susceptible to aphids and other bugs so I prefer to water downwards so that I can keep water off the leaves to control the nesting on the underside of leaves. For that application, this kit is perfect.The kit also has basically everything you need, a small cutter for the main water line, Teflon tape, and cable ties, along with all of the plugs, "T"s and sprinkler heads. The only thing that I used to supplement this kit were some small garden stakes to hold the T's and sprinkler heads in place. Full setup and assembly took me about half an hour for 8 plants. I also added a quick connect coupler to the hose supply end so that I can quickly attach and water with minimal effort.Overall, this irrigation kit offers excellent value for money. It's perfect for anyone looking to automate their garden watering system with minimal effort and maximum efficiency. Highly recommended!
J. Dean
Reviewed in the United States on May 24, 2025
I set this up in my raised beds and it’s working exactly how I hoped. The tubing is sturdy and flexible enough to run where I need it, and the bendable sprayer rods make it easy to target each plant. And the different spray patterns have allowed me to adjust as each plant has matured.Installation was simple. The push-fit connectors don't require heating or fussing with barbs. Simply measure, cut (with the included tool), and snap everything into place. It comes with plenty of parts and the misting coverage is more than enough for my smaller beds.I did need to get a few extra landscape staples to anchor the spray heads for my setup. I also paired mine with a simple timer which makes my watering a fully hands-off thing. This is huge. It's my first year with this kind of irrigation and I can't believe how much time I've saved. Now I can spend it pulling weeds.Overall, it's an efficient and customizable system that saves time and water. Exactly what I needed for a lower-maintenance setup.
Randy
Reviewed in the United States on May 15, 2025
Perfect for my girlfriends raised garden beds.Installed this in a short period of time and it came with all the tools needed to do the job besides a trowel to bury the lines and a hammer to secure the straps.I did add a pressure reducer to the beginning of the system to keep it from blowing itself over when first turning it on.It would've been nice to have some stakes or a base of some sort to better secure the sprayers into the soil but we managed to make them work by keeping them near the edges of the raised beds. There are multiple ways to install this, so I can't fault the product for the way we installed it.The misting patterns are nice and provide good coverage and function very well.All of the tubing fit together easily and didn't leak.Overall very pleased and it makes it much easier and efficient to water the plants.
Cheech
Reviewed in the United States on April 23, 2025
Got this to add to the existing irrigation system. We have both the spike system, where the spray heads are attached to spikes that go into the ground, and a system like this one, where the heads are attached to bendable tubes.Each system has its own benefits and drawbacks, but overall, we prefer this one. The bendable tubing allows you to place the spray (or mist) exactly where you need it and to adjust it as the plants grow without having to pull everything up. This allows you to set up the system before you even plant seeds, while the weather is still cool and pleasant. Then, as the seeds pop up (and they tend to have a mind of their own sometimes), you can move the heads to where the water is needed.Tip (not included in the instructions): To secure the spray head tubes in place, run one of the zip ties through both holes in the T-connectors, forming a closed loop on each side of the T-connector. Then secure each loop in the ground using a landscaping staple. The instructions don't tell you this, but I've found this to be the best way to hold the connectors in place on the soil.The price on this unit, at $30, is very reasonable and you get plenty of pieces to set up your beds. Personally, we cover the tubing with straw mulch to protect it from the summer sun as best we can, hoping to get several seasons out of this system.
Recommended Products