Your cart is empty.
Your cart is empty.Product Description
ULTRA SLIM LOW PROFILE DESIGN
The MI-203 Wallmount allows your TV to sit a mere .5" from the wall with its ULTRA SLIM design. Allowing for more free wall space and allowing your TV or monitor to display without getting in the way.
SIMPLE SETUP TAKES JUST MINUTES
Simple design will allow for incredibly quick mounting of your monitor. Simply attach mounting plate to your desired wall, Attach Vesa Plate to your TV or monitor and Connect them together and you are set to enjoy your new mount!
INTEGRATED BUBBLE LEVEL
Simple solution to one of mountings biggest problems. The MI-203 comes built with an integrated bubble level to allow for precise mounting without the issue of your TV not being level or crooked.
VESA MOUNT COMPATIBLE
The MI-203 Low profile wall mount is compatible with Vesa mounting holes 75mm x 75mm up to 100mm x 100mm and ideal for smaller TVs and monitors
Bryan Notheisz
Reviewed in Canada on May 3, 2025
Simple mount but worked well for my purpose; easy install and puts the TV close to the wall. No issues
Norm
Reviewed in Canada on March 25, 2025
It’s okKind of a pain to installThe screws didn’t fit my screen I ended up having to add several washers to accommodate the long screws.You will need to access in back of the screen from the top but i was installing it under a shelf which meant i had to take the shelf apart to make this work.It’s not the most stable too it seems strong but i ended up making foam inserts to have a more stable insulation.The price was ok but it took alot more time than expected because of all this honestly i would not repurchase i would probably go with something else if i were to do it again given the type of insulation i wanted to do.
James R Hollingsworth
Reviewed in the United States on March 23, 2025
I used it to mount a 20” monitor near my networking equipment in the basement. Easy to install and feels very secure. I wouldn’t use this for a larger TV in a family room, but for the price and my application, it’s perfect. One nice feature: the screws that lock the monitor or TV to the wall portion of the mount can be used for minor leveling if needed.
Customer
Reviewed in Canada on February 24, 2025
This thing is tiny. Literally the VESA 100 square, by maybe 1/2 inch thickness. I mounted my Samsung Odyssey Neo 57 with this!! No problem. It can definitely handle a good amount of weight (says up to 60lbs and I believe it). I would buy this again for mounting or remounting my home TV panels. Would make for a nice tight wall mount.
Droidiphile
Reviewed in the United States on January 26, 2025
Overall, it works, and I'm happy, but the design could be improved. I used this to wall mount the main monitor at the center of my home music studio.First of all, the level fell out when trying to place the wall plate, so (no biggie) I had to use my combination square. Second, those "mating screws" that tie the two plates together are impossible to access the way my monitor is shaped. So I have that "akilter" situation others have mentioned. I think some better engineering would be of value for those issues.Third, there seems to be no option for drywall mounting - only 2 mounting holes. Mine had parts and instructions for stud or concrete mounting. I get that if you are mounting a huge TV. For a monitor :: not only are most modern monitors super light, but you can't always find a stud (nor is there concrete) anywhere near center of where your keyboard is placed. So the wall plate needs 4 holes on the outer perimeter to be used with drywall anchors.
WrenH
Reviewed in the United States on January 21, 2025
The tl;dr: if you need a little, light mount for a little, light TV, this works well but must be frustratingly screwed together at the end in only a few inches' space. I just purchased my second mount for my second 32-inch workout-TV setup, so I'm happy with build quality and price. This mount was easy to install: the base to screw on the wall has a built-in level. A few sets of screws of different diameters were provided for the second piece; one set fit our new TV, although we had to add extra washers. The hard part was screwing the two pieces together once the TV was mounted on the wall. It was a tight fit. We finally stood on a stepladder and used needle-nose pliers to set the screw, then gently used a screwdriver to drive it. If you don't have manual dexterity, get a different mount--one of the ones where you tug on straps to release the TV. Otherwise, this one works well.
Florida Jeff
Reviewed in the United States on September 9, 2024
It keeps the (in my case) the monitor close to the wall and is easy to install to wall. The design for attaching the monitor to the part mounted to the wall is a great design. However, be aware that because it is so tight to the walls you have to plan well for cabling.I liked it enough that I bought a second one.
Kevin H.
Reviewed in the United States on August 15, 2024
• I used this on a 27" Acer CB272. The setup was straightforward until I started getting the brackets on the wall.• Use your own wall anchor if you can. The anchors are cheap and the top anchor just spun with the screw. I had to hold it with a pair of needle nose pliers while I got the screw most of the way in. After I got it seated, the anchor was slide out of the wall by about a quarter inch. That meant the monitor was aiming down towards the desk.• To fix this I had to use some small washers and sheetrock screws to hold the wall bracket tight to the wall.• Then the issue with the design...even with the mount tight to the wall, when you put the monitor on it, it sags down towards the desk. The only way to stop that is to put in the two screws that hold the monitor mount to the wall mount. Unfortunately, at least with my monitor, that is nearly impossible to reach. A screwdriver handle pushes the angle too far to drop the screw into place with a driver. I tried lowering the monitor into place with the screws already in, and no go. I finally had to use a piece of tape to lower a longer screw into place, and tighten it enough to hold the monitor in place. What should have taken about ten minutes took almost two hours.The end result was what I wanted, but for all the options out there, you might keep looking to find one that doesn't have these issues.
Rick
Reviewed in the United States on December 7, 2024
This little mount works very well. The two halves separate - one attaches to the monitor that was equipped with 100x100 mm VESA mounting plate. After that, you simply position the monitor slightly above and in front of the plate, push it in and let it drop down to its mounting position. Two screws on the top (I needed a long philips head screwdriver to reach them since the monitor is quite near the wall) secure the top half to the bottom half.
Eric
Reviewed in the United States on November 15, 2024
This works well and is easy install. All needed installation hardware is included. This is really designed for Tv's or monitors that have the wires coming out of the bottom. It's very close to the wall so wiring coming straight out of the back might not work.
Jozh
Reviewed in Mexico on October 6, 2023
Da un efecto slim a tu monitor, el material de muy buena calidad, tienen nivelador para que quede derechito.Tomar a consideración que tus salidas de hdmi o cableado de tu monitor deben ser con los orificios viendo en dirección hacia el piso o laterales y NO hacia la pared ya que está muy estrecho el espacio qué hay de separación a la pared, si estos están viendo hacia la pared deberas comprar de una vez un adaptador en L para tu hdmi, usb, etc, y estos no se doblen y se dañen pegando en la pared.Un súper producto con Excelente calidad, espero que pronto los de surtan ya que quiero un segundo.
Patrick Duffy
Reviewed in the United States on October 26, 2023
For anyone looking to wall mount their Arendal 1961 speakers, these brackets are identical to the ones Arendal sell with the exception of the speaker mounting holes (Vesa holes) being too small.You'll need to drill out this holes to fit the 6mm bolts that fit the speakers, but otherwise are identical to their $30 mounts that are out of stock as of writing this review.The speaker mounting screws will need to be sourced as well (this kit doesn't come with 6mm screws) but these can be had at any local hardware store.Cheap alternative to the actual Arendal mounts!
Recommended Products