Your cart is empty.
Your cart is empty.Product Description
Convenient Flip Arm Design
Adjust according to the required dimensions for repetitive cutting or drilling operations without the need for remeasuring. The flip arm can be adjusted left or right and switched from the inboard to the outboard position, providing flexibility to meet various needs
Indexing Cursor Calibration
Ensure the cursor reading accurately corresponds to the actual cutting size for precise measurements
Indexing Cursor Calibration
Based on the actual test cut measuring result,
adjust the Indexing Cursor, then tighten the set screw to secure the Cursor with a flat screwdriver.
Leonard Lantagne
Reviewed in the United States on February 13, 2025
Solid stop with no deflection at a reasonable price. I'll be picking up two more for my other miter gauges. Professional furniture/cabinet maker.
M. Speechley
Reviewed in the United States on January 5, 2025
I really want to like this, it seems very well made, but it doesn’t fit Incra track. The T bolt slides in fine, but there’s a protruding section that’s meant to sit in the track and it’s just a hair too wide.
Steve
Reviewed in Canada on April 6, 2025
Came on time and as described.
CnD Gooses
Reviewed in the United States on April 18, 2025
This top flip stop fits perfectly in common size they tracks. This stop is a nice, quality aluminum, and finished in a sleek orange tan. This is the fifth or so item I have branded by o skool, and have been impressed each and every time. This stop it incorporated into my table saw crosscut sled for repeat cuts. Awesome stop! I recommend
F. Ong
Reviewed in the United States on December 8, 2024
This adjustable fence flip stop by O'Skool is very much like a number of woodworking fence flip stops on the market in how it works and attaches to the T-track atop the fence. Where it distinguishes itself from others is first that their price is quite good for this quality of flip stop. All the parts are made from high grade aluminum and all the fasteners to put it together or to attach it to the fence are well made.Second, O'Skool has included instructions on how to change the configuration of their flipper so that it can be on either side of the fence attaching point. This is different and can easily be used and set up for your handedness. I really liked this feature since I tend to work on the right side of my table saw while others may work more on the left. The third and newest feature to this class of flip stops is that O'Skool has added a small rectangular lens to the stop so you can calibrate your flip stop to the exact distance your flip stop edge is from the edge of the blade. This allows you set up an adhesive rule tape on your fence so you can readily make repeatable cuts more easily. Overall, I would highly recommend this flip stop over others that are more expensive but don't have the versatility as this one.
Bill
Reviewed in the United States on December 14, 2024
This 2-1/4" T-track adjustable fence flip stop comes in a good red smooth finish. The indexing cursor is easy to reposition with a flat head screwdriver. The flip function was a little tight at first, but I was able to adjust it using the included Allen hex wrench to my desired tightness. The position locking knob on top rotates and clamps down on the t-track as it should. I am very pleased with the performance of this fence flip stop as it works well on both my miter saw fence setup and also my crosscut sled for my table saw.
DFL
Reviewed in the United States on December 12, 2024
The O'SKOOL 2-1/4 Inch T-Track Adjustable Fence Flip Stop is a solid, sturdy, and well made fence stop.Fit and finish is top notch in all respects. The stop operates smoothly and stays where you put it. It fits to a 3/8" top slot t track with an alignment riser that will hold it solidly into the t slot. You can also use it right over the fence or 3/4" beyond it if you want to add a wear surface like MDF, plus it has a clear/ red line cursor if you want use it with a self adhesive scale under it.This is a heavy duty adaptable fence stop that should last for years, and better than some I've seen that cost more.It's well worth the price.
Master
Reviewed in the United States on December 11, 2024
I see vendors/mfrs of stop blocks trying to point out that their stop blocks don't budge like the competition, but they downplay just how hard they're mashing on competitors' block to force them to move. This thing doesn't budge unless you put ridiculous amount of force on it, and even then, only a tiny bit.This stop block is pretty much rock-solid, flips out of the way when not needed, includes an adjustable indexing pin, and is neither red nor blue.Yeah... for the price, this thing is a winner. The only thing it's missing is micro-adjust, but that's easily solved by slipping a business card or playing card between the workpiece and the stop block.Would recommend and would buy again.
D. DiCicco
Reviewed in the United States on December 11, 2024
this t-track has some nice heft to it and feels like a nice build. all the hardware is thick and overbuilt and this brand has some nice upgrades for your shops T-track use at some really budget prices. compared to the T-Track Adjustable Fence Flip Stop I already have, this one has the nice added bonus of the indexing for accurate repeated cuts. I wish the arm was a little longer but that's also based on my sacrificial fence thickness and was setup for my original Adjustable Fence Flip Stop but this item does allow for some adjustments to accommodate your specific fence needs. Its a nice piece of hardware that looks good on your table saw !
Recommended Products
$119.00
$ 46 .99 $46.99