Your cart is empty.
Your cart is empty.Product Description
The wide application of fog lamps
Johnny Lem
Reviewed in the United States on February 1, 2025
Fits perfectly and No gaps. Super easy to install. It comes with the instruction ManuelThank you....
RBMerc
Reviewed in the United States on December 12, 2024
I had a switch connected to it. I highly recommend it.
A. Product Reviewer
Reviewed in the United States on November 23, 2022
The lights fit correctly on a 2012 Honda Odyssey. Installing the lights is easy, just grab the covers from the end nearest the center of the bumper and pull, firmly. The cover blanks pops right out.Installing the wiring harness is a pain. I did run into the problem that the voltage on the parking brake switch is only about 10.4 volts when it is released. The wiring harness has a wire which you have to tap into the parking brake switch line. It's 'fairly' easy to get to while standing on your head. The problems is that voltage (10.4v), or the current behind it is not enough to activate the relay, and the lights won't come on even with the key in the ignition, and in the run setting. Have not tried it with the motor running... might make the difference. Will update it I find it different.Instead, I wired the small red control line to an open circuit in the fuse box by the parking brake with a 'add-a-fuse' harness... and it works. Unfortunately, it leaves a small parasitic drain on the battery for the light in the switch.Also, the red and black power leads on the wiring harness seem very light weight.It does come with H8 bulbs installed. I swapped them for LED H11 bulbs. The H8's pull 3-4 amps each when tested on a power supply. The LED bulbs (Sealight H11 here on Amazon) pull 1.5 amps each and are brighter. Given the small power leads in the wiring harness I'm glad I switched to the LED bulbs.
Recommended Products