Your cart is empty.
Your cart is empty.OTC's Slack Adjuster Puller will yank even the most corroded slack adjuster off the S-cam - and do so in just a fraction of the time needed with 'heat and beat' methods. Tool won't damage components. Made with a rugged forcing screw and cast steel body. Works on Rockwell, Haldex, Gunite, and Bendix automatic adjusters. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.
Dave hawke
Reviewed in Canada on April 7, 2024
it worked awesome better than expected I highly recommend using this slack adjuster puller
Henry S.
Reviewed in the United States on February 28, 2022
Good Tool when you working on the trailers
L. A.
Reviewed in the United States on July 23, 2021
Took a bit finnagling to get it on the slack because of the stupid inflaition system is always in the way. But once I got it on the slack it came off like butter. Totally worth it for anyone who's tired of the slack adjuster removal game.
Eric
Reviewed in the United States on June 28, 2021
I had one before, always used it with an impact. Probably removed about 50 to 60 slack adjusters before the thread got stripped. I know you're not supposed to use an impact so thats why i do recommend it, since it did help alot.
wayne
Reviewed in Canada on January 3, 2021
Put it on haldex fine would not move by hand put the impact on it walk it right off awesome great product
Norman
Reviewed in Canada on May 14, 2020
Product will do the job I bought it for.
Customer
Reviewed in the United States on July 26, 2019
I used it to bull an awkward pitman arm setup. Worked. Just be careful it does not overheat when using impact wrench.
Allan B. Wilson
Reviewed in Canada on December 8, 2018
At first I used with a 1/2" impact. Worked great.Then I had a few stubborn slacks, used my 3/4" impact. If sure was stubborn, but this puller didn't give up and little by little that auto slack came off just fine.
robert
Reviewed in the United States on October 23, 2018
Haven't used it yet looks like it should work good OTC makes really good tools
Ken the Mad
Reviewed in the United States on March 7, 2017
Works great on every model of automatic slacks I had to remove. (Haldex, bendix, and stemco) this will remove the most stubborn slack with out a promblem for the most part. I.have had a couple where I had to apply heat.
Customer
Reviewed in the United States on February 19, 2016
I used this item to remove the Haldex self adjusting slack adjuster on a 2007 Kenworth. The tool worked exactly as it was supposed to. Would have been nice if the pusher bolt was a little bit shorter so I could have used a ratchet instead of an open ended wrench to turn it but other than that it worked better than having a smelly grease fire with a torch.
Oleg
Reviewed in Canada on July 23, 2015
Excellent
Blatch
Reviewed in the United States on August 7, 2012
After years of truck and trailer repairs, we finally got smart and bought this tool. It shaved hours off dealing with slack adjuster removal. Works great and reasonably priced.
Recommended Products
