Your cart is empty.
Your cart is empty.Product Description
PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise Products are covered by a Limited Lifetime ! Introducing the Panavise 353 PLATED STEEL JAWS (pair) for 301, 303, 304 and 381 w/screws, Your heavy-duty alternative! For 303 and 304 Vise Heads. Recommended for high heat, industrial environments. Designed for firmly holding heavier objects in a high heat environment. Limited Lifetime !
From the Manufacturer
PanaVise 353 steel plated jaws are replacement jaws for use with the PanaVise 303 standard vise head, the 304 low-profile head and the 301, and 381 vise combinations. Combining the high melting point of steel along with its rugged holding power, 353 steel plated jaws are an ideal choice for vise applications securing durable objects in high heat, industrial environments. Jaws come in pairs and include two mounting screws.
Limited Lifetime Warranty
All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. In the event of defective materials and/or workmanship, PanaVise Products, Inc. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance.
About PanaVise
Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work-holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, electronics, CCTV camera mounts, and audio/video mounts, earning PanaVise the nickname the "the hold it anywhere you want it company."
Janusz J.
Reviewed in Canada on July 10, 2024
Replaced the standard plastic jaws which are prone to heat from the soldering iron. The steel jaws are solid and hold the part in place.
Heung Soap Choi
Reviewed in the United States on May 6, 2022
Quality is very good. Steel jaws are very strong!!!
DVB
Reviewed in the United States on April 20, 2022
I purchased this set of steel jaws after noticing that I had slightly melted the stock plastic jaws on the 303 Standard Head during a Dremel cut-off operation. The head of the machine screw I was cutting got hot, and as it did, it embedded itself in the plastic. I knew right then that I needed to find some steel jaws for the vise.The jaws are a good thickness and machined to correct tolerances as far as attachment is concerned. Meaning, the screw holes line up fine. But there are two problems:First, upon installing the jaws, I noticed that the top surfaces of the jaws are about 1/16" offset from one another. That is, one stands a little higher than the other when the jaws are fully closed. It isn't the end of the world, but it still bothers me a bit. This was not an issue with the stock plastic jaws.Another aspect of these jaws that I do not care for is the lack of grooves or crosshatching for gripping workpieces. The inner surfaces of the jaws are completely smooth. This is fine for gripping something flat and broad, like a piece of sheet metal or a piece of wood, but if you're holding something with a tendency to roll, the jaws do not perform well. If I had a metal mill, I would absolutely etch some grooves into the jaws.Beyond that, the jaws are fine. If you think you need them, get them.
Friagram
Reviewed in the United States on June 20, 2016
Steel jaws, work fine. Not terribly durable, but good enough to hold parts for grinding or cutting. Not adequate for hammering or bending large objects or heavy metals.Works great for aluminum, copper, brass.
espresso addicted
Reviewed in the United States on May 30, 2015
Perfect for the job. Now i can solder wires withouth burning the plastic jaws.
Stan
Reviewed in the United States on March 11, 2015
Great when you have something that is going to get hot, or need something that will might need a little hammering on.
David
Reviewed in the United States on November 3, 2014
Nice item, useful for holding items where extra grip is needed. Same complaint I voiced about the nylon jaws, though. A v-groove running horizontally and similar grooves running vertically near the ends would really improve the grip on round and irregular stock.
Rosiecork
Reviewed in the United States on December 10, 2013
Necessary accessory if you want to heat something in the vise, like soldering. Losses a star because this should really be included with the vises themselves!
CZ Tom
Reviewed in the United States on January 26, 2012
I guess this review should be on the PanaVise, not these steel jaws, but this is definitely the coolest vise out there. I love my PanaVise. For normal residential use it's just perfect. I mean, if you need to clamp the wheel from a '64 Chevy in your vise, no, this isn't what you want. It's fairly small, and isn't meant for really heavy work. But for the average household workbench it's ideal. It swivels 360 degrees, angles anywhere from horizontal to vertical, it's just perfect. Best of all, the jaws are interchangeable. These steel jaws will hold small to medium size pieces, they also have nylon and PTFE jaws for more delicate work. If you order the jaws with something else (the PanaVise maybe) to get the cost above $25, shipping is free and you can't go wrong. Recommended!
Recommended Products
$359.99
$ 99 .00 $99.00
$311.57
$ 99 .00 $99.00