Your cart is empty.
Your cart is empty.Product Description
Panavision is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All Panavision Products are covered by a Limited Lifetime ! Introducing the Pan vise 354 BRASS JAWS (pair) for 301, 303, 304 and 381 with screws, A gentler, high-heat choice! For 303 and 304 Vise Heads. A non-marring alternative. Non-marring alternative for heavy-duty or high heat applications. Limited Lifetime !
From the Manufacturer
PanaVise 354 brass jaws are replacement jaws for use with the PanaVise 303 standard vise head, the 304 low-profile head, and the 301 and 381 vise combinations. Brass jaw pads are a good choice for heavy-duty jobs in high heat conditions where the wish is also to protect the held item from possible damage from the pressure of the vise. This is accomplished through a combination of brass alloy's significant heat tolerance and the relative softness of composition which will not marr most metal surfaces. Brass is also corrosion resistant, which makes it a good choice for use in damp environments and for use with pipes. PanaVise 354 brass jaws come in pairs and include two mounting screws.
Limited Lifetime Warranty
All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. In the event of defective materials and/or workmanship, PanaVise Products, Inc. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance.
About PanaVise
Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work-holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, electronics, CCTV camera mounts, and audio/video mounts, earning PanaVise the nickname the "the hold it anywhere you want it company."
Customer
Reviewed in the United States on April 27, 2025
Correct fit for the standard vise.
Leonard D. Thomas
Reviewed in the United States on April 13, 2025
Purchased for an older vise with steel hex cut faces. These hold the work with out scratching or damaging the surface.
Paul Weiss
Reviewed in the United States on September 1, 2023
These provide more strength than the stock plastic jaws, but are still unlikely to mar metal objects that are being held, because the brass is softer than steel. There is still a place for the stock jaws if you’re trying to hold something made of die-cast zinc or plastic, so keep them handy; switching from one set of jaws to the other is a matter of a minute or so.
GlennS
Reviewed in the United States on February 19, 2021
Got these to replace the plastic jaws on my Panavise. Fit perfectly and they don't deform or melt. Work great for my needs.
No Doubt
Reviewed in the United States on June 29, 2020
These brass jaws are excellent for holding a small steel workpiece securely without scratching it.BTW – several reviewers said that the supplied mounting screws were too short. I didn’t find that to be the case, but I know why they thought so. The holes in the jaws for the screws aren’t on the center line. Consequently, there’s a right way and a wrong way to place the jaws on the jaw faces. The right way is short side down. If you place them long side down, the jaws won’t properly fit into the jaw face recess, and the screws will seem to be too short.
Medic
Reviewed in the United States on March 20, 2020
These wee brass jaws will never mount on my 8" vise, and I knew they would not. I just wanted two pieces of soft metal to clamp around parts that I secure in my 8" vise without marring the part to be worked on. I knew I could get these quickly whereas my local big box stores had no brass vise jaws and I did not need a 3-4 foot section of brass bar stock. These will fit my soldering iron vise though. I ordered what I needed at the moment and received them on time.
Peter A.
Reviewed in the United States on July 6, 2015
Great addition to PanaVise. The screws that hold the jaws, however are too short to securely hold them. I went to the local hardware store and bought slightly longer screws and now that are good to go.
Roger
Reviewed in the United States on February 10, 2014
good product for holding harder metals that you don't want scratched but need to hold tightly. All the Pana Vise products are excellent and do the job.
Recommended Products
