Shopping Cart

Your cart is empty.

Your cart is empty.

PAR Meter Lux Meter PPFD Full-Spectrum Tester Photosynthetically Active Radiation for Indoor and Outdoor Plants for Indoor Outdoor Grow Plants Film Photography lu

5.0 Write Review
Free shipping on orders over $29.99

$109.99

$ 51 .99 $51.99

In Stock
  • 1. HIGH ACCURACY: Our Lux meter ensures high accuracy with a reading deviation of only +/- 4% for measurements up to 10,000 Lux or 1,000 FC, and +/- 5% for readings up to 400,000 Lux or 40,000 FC. You can trust the precision of our device to provide accurate luminosity intensity measurements.
  • 
  • 2. INSTANT RESPONSE: With a quick 0.4-second response time, our Lux meter offers near-instantaneous results. You no longer have to the luminosity intensity; simply measure and obtain the readings in seconds.
  • 
  • 3. WIDE MEASUREMENT RANGE: Unlike other light meters, our Lux meter offers an impressive measurement range from 0.01 to 400,000 Lumens (or 0.01 to 40,000 Foot Candles). This wider range allows you to capture a broader spectrum of luminance levels, ensuring versatility in various lighting conditions.
  • 
  • 4. EASY TO USE: Our Lux meter features a rotatable light sensor that can be adjusted up to 270º. This design eliminates the need to reposition the entire device when measuring luminosity intensity from different angles. Simply rotate the sensor to your desired direction and accurately read the illuminance at the front.
  • 
  • 5. DATA MEMORIZATION: Keeping track of your measurements is made effortless with our Lux Meter. It has the capability to store and recall up to 33 sets of readings, allowing for easy comparison and analysis. Additionally, the RELATIVE measuring mode enables you to observe the differences between current and recorded data, providing valuable insights for your lighting projects.


Large screen display
User-friendly, easy to operate
Record up to 100 measured values
For real-time display, it shows the last four recorded data
Hold function
MAX / MIN / AVG Data
With tripod socket
Low battery indicator
Auto turn off function after 3min of no usage
Simple calibration function
PPFD (Photosynthetic Photon Flux Density) Measurement
Range: 0~5000 mol/m²/sec
Repeatability: ±1 mol/m²/sec
Display Resolution: 0.01 mol/m²/sec (0~99.99); 0.1 mol/m²/sec (100~999); 1 mol/m²/sec (1000~5000)
Measuring rate: 1 measurement per second
Cut-On Wavelength: 400±10nm
Cut-off Wavelength: 700±10nm
Power Requirements: 2 x 1.5V AAA alkaline battery
Dimension: 115 x 60 x 24mm
Weight: approx. 115gms (without batteries)
Comes With:
1 x PAR Meter
English User Manual
Standard factory packaging