Your cart is empty.
Your cart is empty.Pond Shield is a non-toxic epoxy liner, made in the U.S.A designed for the pond and water feature industry. It is used to waterproof and seal water features or ponds with a more designer, formal or natural look than rubber liners. Using Pond Shield epoxy means no more unsightly folds or creases. In addition, unlike rubber liners, there are eleven Standard colors available - Black, Charcoal Gray, Chocolate Brown, Clear, Competition Blue, Delta Blue, Gray, Moss Green, Sky Blue, Tan and White. Pond Shield is used for waterproofing structured surfaces found in water features such as Koi ponds, pools, fountains, aquariums, salt water tanks, hydroponics, streams, waterfalls, reflecting pools, mini lakes, holding tanks, etc. It is easily applied and easy to maintain and for most applications, a single coat application is all that is needed for proper coverage. In addition, your pond will be virtually maintenance free with a surface that algae can be easily wiped off of and is safe for fish (and other wildlife) and p
Bryan Witte
Reviewed in the United States on February 26, 2022
The media could not be loaded.
aaron7405
Reviewed in the United States on February 20, 2022
The media could not be loaded.
Customer
Reviewed in the United States on August 22, 2020
This product did not work as advertised. Not only did the pond leak, but it also left a toxic residue on the surface of the water.
David E.
Reviewed in the United States on May 12, 2020
i used this to seal off an enclosure for a baby croc couldnt be happier witht he results i applied 3 coats outstanding
Bar
Reviewed in the United States on April 28, 2020
I needed a bit more than 1.5 gal and ordered a second same color - gray quart. the shades of gray are very different and unfortunately above what will be the waterline.
Gregory C Joyce
Reviewed in the United States on April 22, 2020
I used this to coat a 750 gallon cement pond and it worked beautifully. I was very apprehensive as I had never sealed a pond before and wasn't sure what to expect. This product made it easy. Very easy to mix and apply. I used a trowel to get corners and a roller for flat surfaces. Two coats completely sealed the pond. There was probably enough product here to do up to 4 coats in my pond...it goes further than you'd expect.
D417RiCeR
Reviewed in the United States on May 31, 2019
We used this epoxy product in a plastered spill over spa. Plaster was acid washed, rinsed baking soda water mix, washed again with tsp and rinsed one final time. Patch any delaminated plaster with pool mix and acrylic adhesive. After letting it dry swept and vacuumed any debris. Taped off tiles and jets and drain. Product arrived packed well and cans sealed tight with a nylon/plastic ring to keep lids on. This product is very thick and cures faster when it’s hot. Would recommend applying early morning or evenings when it’s not so hot. We mixed 1.5 qt batches at a time. Adding some (4oz) denatured alcohol to thin product to make it easier to work with. Would recommend getting a few extra buckets to mix each batch in. Reusing the same bucket causes issues. We poured the mixed product directly in to the spa. Used a cheap squeegee to spread out product evenly on floor and up walls. Used a low pile nap roller to smooth it out and a 2.5in brush to get in corners and around water jets. Keep an eye out on product as it cures if you see bubbles try using a heat gun to eliminate it. We then applied a second coat 10 hrs later. And then 3rd cost to touch up areas. This stuff is amazing nice thick coat that seems to bond very well. Will update on how it holds up.
Mom of Four
Reviewed in the United States on August 27, 2015
This product works if you read their website closely including the frequently asked questions. It needs to be thinned as per the instructions and then it works.
Recommended Products
