Your cart is empty.
Your cart is empty. Specification:
Item Type: Router Kit
Lifting Base Material: Aluminum Alloy, Stainless Steel
Router Plate Material: Aluminum Alloy
Table Top Size: Approx. 240 x 200mm / 9.4 x 7.9in
Maximum Lifting Stroke: Approx. 51mm / 2in
Lifting : Manual lifting, equipped with manual lifting lever
Mounting Screw Hole Position: Approx. 70 x 62mm / 2.8 x 2.4in
Applicable Machine: Universal type, suitable for trimming machines with motor diameter between 64-66mm
Package List:
1 x Lifting Base
1 x Handle
4 x Screws
1 x Hex Wrench
1 x Router Plate
1 x Engineering Plastic Backer
1 x Angle Disc
2 x Insert Rings
Charles Vernon
Reviewed in the United States on February 21, 2024
Not usable for a trim router. Cranks up but doesn't crank down. Not designed for downward pressure.
carl
Reviewed in the United States on January 6, 2024
The holes for the lift do not even line up and no way to get the wrench to raise the lift in.
Karl Bryan
Reviewed in the United States on August 4, 2023
The router lift base screws holes don't align with the recessed screw holes in the top plate. The top plate rings that go around the router bits are way to small and would not fit the large recessed hole in the top plate. The hole for the router lift crank would not align with the top plate, even if the top plate recessed holes had been in the correct position.
R. Jernigan
Reviewed in the United States on August 18, 2023
Package included all expected parts: nice powder-coated table, deburred with clean slots, aluminum fence with plastic dust vent, and powder-coated router lift with crank and screws. It's a good starting point.However, as you can see in the photo above, it arrived broken. The main lift screw depends on a *tiny* finneal section that is supposed to capture the third lift ring; that section is too small and is very brittle, and it doesn't surprise me it broke every during shipping. It's a bad design, that will not last even if it arrives healthy.But the parts otherwise are quite nice. The lifter has four linear bearings on hardened rods, and I like the grip mechanism used to hold a router. The plate is small, but that's what I was looking for.Basically, you're getting what you paid for: both the good and the bad. Don't expect a ready-to-use kit--but if you're working in a shop, you likely have the tools to solve this. I'll be drilling out the hole in the third ring, applying a longer screw, and adding captures to the screw on both sides of the plate.It will be a fine setup, as long as you're willing to finish the work.
Webby
Reviewed in the United States on August 15, 2023
The item was as described and we'll priced. It arrived promptly and I am now enjoying the product.
Recommended Products
$109.99
$ 48 .99 $48.99