Your cart is empty.
Your cart is empty.Product Description
This shower door bottom seal is constructed of clear vinyl and comes in a 36 inch lengths. Its profile features a drip rail only, and it is designed to attach to the bottom of frameless, swinging shower doors without the need of adhesives. Cutting down to size will be necessary if door measures less than 36 inch in width. For alternate design, see Prime-Line part M 6258-1.
From the Manufacturer
This shower door bottom seal is constructed from clear vinyl. It features a slip on design requiring no adhesive and a 36 in. length that can be cut to size. This style seal is used on frameless shower doors and fits 3/8 in. thick glass.
Liz
Reviewed in the United States on March 18, 2025
Didn't fit my 3/8" door because the top is tapered. Only the base is 3/8". Going to try the 1/2" to see if I have more luck.
David DiBiase
Reviewed in the United States on February 12, 2025
The plastic is so brittle that it shattered when I tried to "pry" it apart to fit, as directed. I will replace it with a different product.
Randall
Reviewed in the United States on May 5, 2024
Fit was good, but the flap was not staying attached to U channel. Would not buy again, flap material very thin.
Mark O
Reviewed in the United States on August 13, 2019
Works fine. Lasts about 2 years for me.
PR
Reviewed in the United States on March 6, 2018
Didn’t fit the glass door and very stiff - need more pliability to work.
FS
Reviewed in the United States on April 7, 2017
Had to use some WD40 to make it fit the door. With a little elbow grease it worked
Kim
Reviewed in the United States on June 10, 2015
Perfect fit!
Nora
Reviewed in the United States on March 12, 2015
Fit our shower doors perfectly! Quite snug, in fact. We had to use a rubber mallet to get it to slide all the way on.
Recommended Products
