Your cart is empty.
Your cart is empty.Product Description
Glenn Skedeleski
Reviewed in the United States on May 10, 2025
Came on time and fit well
W. Walsh
Reviewed in the United States on June 30, 2024
After damaging the high side conversion fitting from another kit, I went around looking for replacements and bought this Fourtry branded set along with a competing brand. The Fourtry kit's high side fitting is well made, contained a properly fitted gasket and worked perfectly in converting a very old R-12 system that had long been disused.My only complaint is that these fittings came packaged in a very tight plastic bag. I couldn't get the zipper seal on the bag to open, and finally just cut it off.
River
Reviewed in the United States on May 9, 2024
Did his job with red on was the red size
Earl K.
Reviewed in the United States on November 19, 2024
It only fit low side on 1991 capri Xr2
John Baylor
Reviewed in the United States on September 10, 2023
Installed over the existing fittings without an issue. The price was great and they work well.
Sarah
Reviewed in the United States on August 5, 2023
Low side doesn't fit. Still used hi side and didn't realize that the valve was slightly loose and all freon leaked out.
James Connelly
Reviewed in the United States on August 31, 2023
It sucks that I couldn't find parts like this locally. These days, self repair is not encouraged. Thank goodness for Amazon though. All 134a systems leak a bit every year. My freezer was 10 years old and not cooling as low as it should. After installing a bullet piercing valve to the service line of the compressor, found in my case by feeling each line as the compressor was running. Hot is high, cooler is low, and service line should be cooler as well. So after installing valve, I added the low side connector, went to AutoZone for a $10 bottle of basic 134a, self sealing not needed, and honestly not even sure it's good for the system, gave it a few squirts, about 2.5 ounces total, measured by weighing the can before use, and weighing while injecting, and boom. Back to 0°. My system uses 7oz, and there are more professional ways of adding Freon, by vacuuming, using a manifold, and putting back 7oz exactly, but why? My system was still under a vacuum, and still working, but low on 134a.By being careful and conservative in how much you add, you can recharge your system using this adapter very easily. All I probably need at this point to get the system down to -8 is one more quick 0.5 oz squirt.
Aaron Bitker
Reviewed in the United States on July 8, 2022
Good
Recommended Products