Your cart is empty.
Your cart is empty.Product Description
Compatible with the following vehicles:
- 2007-2016 Cadillac Escalade
- 2007-2016 Cadillac Escalade ESV
- 2007-2013 Cadillac Escalade EXT
- 2007-2013 Chevrolet Avalanche
- 2007-2016 Chevrolet Silverado 1500
- 2007-2014 Chevrolet Suburban 1500
- 2007-2016 Chevrolet Tahoe
- 2007-2016 GMC Sierra 1500
- 2007-2016 GMC Yukon
- 2007-2014 GMC Yukon XL 1500
Replaces Part Numbers:
- RK80670
- CB90268PR
- CB90268
- 521-024
- 15096198
- 25812726
This is a compatible replacement part manufactured by AA Ignition. This ball joint kit is NOT a genuine OEM part. Vehicle makes and their associated vehicle models and part numbers are used in this listing only to identify the vehicles this control arm and ball joint kit fits.
This replacement kit includes the castle nut and grease zerk for a proper and hassle-free installation.
If you are experiencing clunking noises from the front suspension, excessive vibration on the front of the vehicle or your steering wanders to the left or right then you may have a bad or failing control arm and ball joint.
The upper control arm and ball joint can be accessed by removing a few parts after removing the front wheels. Please note alignment should be done after installing for proper vehicle operation.
Experience the AA Ignition Difference!
ASE Certified Technicians
Installing parts on you vehicle can be difficult and we understand. That's why we have certified technicians on staff to assist you with installation or even properly diagnosing your car. Our technicians will even provide the factory repair manual to make installation easier for you.
Strict Quality Control
All of our parts undergo strict quality control not just before shipping but throughout the production process. During each step of production multiple quality control checks are performed to insure each and every part lasts for years to come. Satisfaction Guaranteed.
An American Business
AA Ignition is a division of GWA Auto Parts and we are proud to be an American Small Business. Located in sunny South Florida and founded by long time car enthusiasts, AA Ignition takes pride in providing quality products at an exceptional value.
Big R
Reviewed in the United States on March 21, 2025
These arms seem to be good quality, fit great on an F150, only time will tell if they last.
Ryan
Reviewed in the United States on January 24, 2025
great fit still goin strong. works with 6 inch lift as it should. quality is very good for the price i do recommend these
frank
Reviewed in the United States on July 23, 2024
When I added the grease to the ball joint after a few days is all came out I hope that doesn't hurt the ball joints but only time will tell. I should have read more carefully would have never purchased I'd I knew you have to grease them.
Jace
Reviewed in the United States on May 3, 2024
Put these on a 08 Chevy Tahoe fit perfect and fixed my camber issue running these with 24x14s and they are holding up good better then ksp uppers . Highly recommend!!
Dennis D.
Reviewed in the United States on March 20, 2024
Purchased this item and got them installed on my Ford F150 lariat with a 2" lift manual would return them if I didn't get them installed and paid 600$ on labor...now my tires run for some reason and I am not satisfied with my purchase very well made though just a heads up.
Matthew D.
Reviewed in the United States on January 14, 2024
Had these now for a few months install is pretty easy, only downfall is they do rub my stock tire and wheel size 275/65r18 but only when when Iām maxed out turning so not a big deal to me much more beefy than the stock arms and grease serts are a nice touch
J Rod
Reviewed in the United States on December 2, 2023
The control arm and bushings are decent, but the ball joint is not grade A quality. The rubber boot that goes around the ball joint is very low quality ball joint does not see well and does not hold Grease well.
Justin Voskuil
Reviewed in the United States on September 22, 2022
First off, I purchased for my 07 F150 XLT super crew 4x4. The truck has a true 6 inch lift that does not use any strut spacers in the front. The truck has 20 inch wheels running 35x12.50 mud tires. These control arms where impressive at first site. The tubing used is large and the fabrication looked well done. The welds looked great, the bushing fit well and I liked that they are Polyurethane. The ball joint looks of great quality.These arms installed quickly and fit perfectly. I believe it took me approximately 2 hours start to finish.Had a chasis shop align the truck for me and can't express how happy I am with the purchase. The truck handles better and has a better ride. I even believe it brakes a bit better.These control arms are so superior compared to the OEM arms or what you get at the local parts store.One of the best upgrades I have ever done on any of my vehicles. Do not hesitate to purchase these control arms. They are high quality at a very affordable price.
Recommended Products