Your cart is empty.
Your cart is empty.Product Description
Some Tips And Tricks For Usage
Sealing Seams
Please be sure to use silicone or silicone tape to waterproof the internal seams of the mold before use.
Recommend with release spray
The mold surface is self-lubricating. For thicker resin pours, recommended to use mold release spray, which will make the mold release smoother.
Demolding Method 1
For shallow pours, use a rubber mallet to tap the mold's inner walls and separate the resin. Flip the mold and tap the backside to release.
Demolding Method 2
For thicker pours, it is recommended to separate the shorter side of the mold and release it using a chisel.
Dividers Usage Demonstration
Cathy W
Reviewed in the United States on May 27, 2025
This table is an excellent choice for various crafting projects. Its adaptable surface accommodates projects of many sizes and no leakage. The non-stick surface ensures effortless mold release. This feature minimizes project damage and frustration. I highly recommend this table for its versatility and ease of use.
B Pettis
Reviewed in the United States on May 16, 2025
This is a customer service review not a product review. I bought this mold and had an issue with it. They immediately remedied the issue and went above what I was expecting. I will definitely buy from them again. They have the best products and the absolute best customer service!!
claytonjames85
Reviewed in the United States on February 9, 2025
I had originally gave this mold 1 star cause I reached out to inform growling that they had shipped the wrong pieces that go across to hold down the little blocks and though they did communicate there was some confusion and I kept getting emails asking the same question so I figured I'd write a review to get their attention and once I received the parts I'd give an actual review on the product. 5 stars all day long. Amazing quality and very sturdy. Everything about these molds is 5 star. They are very solid and have some weight to them, which they should. The leveling legs are a fantastic addition to a very good and quality mold. Thank you growling for sending me the right parts. They also sent me extra dividers too so that was pretty awesome. If you're in the market for some good quality epoxy molds that are reusable and reliable, you're in the right place.
Rod Massie
Reviewed in the United States on April 28, 2025
A fantastic product. Works great and is easy to demold projects.
Ray C
Reviewed in the United States on April 22, 2025
We absolutely love this table. I bought it for my wife and she has been practicing and building small tables none stop. She is working her way up to doing something bigger every other week as she perfects her technique. This table is solid. Easily over 100lbs. It's for serious use and you will need room if you buy this one. We bought the biggest size. I added pictures for reference. It runs almost the entire length of our 12 foot island. We set up an entire space in our garage for it because it is massive and for people that are serious about their craft this is a must have. The leveler on the tables are very help full and keep the resin nice and even. If you are serious about the hobby this is a no trainer and worth every penny.
Customer
Reviewed in Canada on April 19, 2025
Very high quality! Very well built!
Tomas
Reviewed in the United States on April 13, 2025
Very well-made and high quality mold! I love the leveling frature with adjustable feet and the opportunity to insert smaller sections to modify the size of the project. The cross bar clamps also make it much easier to secure wood in place when working with resin
JB
Reviewed in Canada on December 8, 2024
Superior Customer Service from the TASICA's Growling Team. There was a scratch on one of the side panels when I received it. I contacted the seller (TASICA) and they responded within hours and promptly sent me a replacement panel by courier. I had multiple questions each of which they replied to promptly (each within and hour or so).Excellent quality mold for anyone who assembles their own molds (rather than using multiple fixed-size preformed molds). Very well constructed. (only one thing of note is that the levels on my mold are very close but not 100% accurate (very minor issue as it was easy to check with my own level and resolve with the adjustable levelling feet).
AZSquirrel
Reviewed in the United States on December 13, 2024
I've been making resin boards for a few years and I've tried a lot of options. Growling's resin mold is a game changer. The quality is far beyond anything else on the market, just look at the thickeness of the panels. It easy to use from a few screws to put it together and a few to remove when its time to remove the board. The board also comes with built in levels!One of my favorite parts is the lack of lost/wasted resin. All the other molds I've used in the past allow the resin to seep under the wood (even if you use caulk to seal and secure the wood). The competition's cheap plastic warps overtime and you can't stop the resin from getting under the board. Which results in a huge waste of resin, money, and time getting it removed.The board is somewhat longer than what i would consider practical. However, I'll pick up their dividers and it will be perfect, along with provide some additional options for customizing the board.I would recommend NOT using caulk to seal the board. Its a super tight fit and not needed, making the final stages a lot easier. If you have any concerns about leaks, I would grab a role of resin tape to put on the outside seams.
Dale Holcombe
Reviewed in the United States on November 3, 2024
I LOVE using this mold. I was looking for a HDPE mold that I could use multiple times and it allowed me to make different size resin projects. I make charcuterie boards for gifts for family and friends.I had previously made my molds using MDF board but after using them a couple of times they would not hold up and I dealt with lots of resin leakage especially when I used deep pour resin. I was looking for a mold made out HDPE that was budget friendly and allowed for different size charcuterie and cutting boards to be made. This mold is exactly what I was looking for and more. It is extremely well made and so easy to use. I accidentally drop one of the sides when I was putting it together and no harm was done. It has separate size HDPE pieces that can be purchased for a very reasonable price that allow for one to make all sorts of different size projects.The mold has several devices that allows one to hold the wood in place so it doesn’t float when the resin is added. I used a mold release on my project just to quarantine the project I made would easily release from the mold. I prefer to take two of the sides off before I remove my projects, however, I don’t believe it was necessary.Another great item the Growling company added to the mold was away to check if it was leveled properly. My garage floor has a slight slope to it and leveling my MDF molds was challenging on my work table. Not so with this mold due to the leveling devices the Growling company added. A device was added to one side and the end of the mold. Leveling is a snap.In, summary this mold is extremely well built and durable, very budget friendly, lots of different size projects can be made and could be made at the same time. I had no leakage of resin and the project I made released easily. Perfect for anyone starting to learn how to make resin/wood projects or for the expert who is in the business of selling these type of projects. Thank you Growling for providing me with an outstanding mold😊.
Kurt I.
Reviewed in the United Kingdom on November 12, 2024
I have tried and tested many resin moulds and they all have some kind of issues, so I thought I would pay a little more and get the Growling epoxy mould and wow what a difference , its stable, doesn't leak and doesn't have any edge issues like most of them, the quality of the product is fantastic and feels very well put together and im sure it will give many years of faithful service, I am very pleased with it A++++
Bill
Reviewed in Canada on October 7, 2024
This HDPE material is good, solid, but it was not square. I had to unscrew the sides and reposition the 4 sides to make it square, in order to put in the divider. Minor inconvenience. I did contact Growling support and they were very helpful.This mold has levelers which is very useful. 3" deep, good for deep pours. Many size options with the dividers. My first resin design released from the mold and looks good. Overall, very good.
DW Ilderton, ON
Reviewed in Canada on October 22, 2024
This is our first try at adding epoxy to cutting board creations. Although it is early, we really appreciate the sturdiness of this mold along with the ability to alter the length of our projects with added dividers. The cross bars ensure stability and keep our projects squared up. We are certain that every member of our extended family will soon have a gift made in this mold. We are extremely happy with Growling and their product so far.
Recommended Products