Your cart is empty.
Your cart is empty.Product Description
Describe
Features
- Dimensions:Stainless Steel Heat Plate Dimensions: 15 1/16" x 3 15/16" ;Stainless Steel Burner Dimensions: 14 7/8" x 1";Crossover Tubes Dimension : Adjust from 5 to 9.5 inch, long enough will fit your grill perfect;
- Package:3 packs
- Fits for Charbroil 463722313, Charbroil 463722314, Charbroil 463742111,Charbroil 463722311, Charbroil 466721911,Charbroil 463722312,Charbroil 463722911, Charbroil 463722313, Charbroil 463750914, Charbroil 463722315, Charbroil 463770915,Char-Broil G312-0205-W1
Even flame
- Even flame&Fully Burned , smooth inside the pipe, can provide enough heat.Stronger and more resistant to rust and burn-through.
Protect Burner
- Protect the burner from food residue, blocking the orifice,The Heat Plate have the exact holes to hold the heat plates in place, easy to install.
Replacement Kit
- We have already matched the burner, heat shield for you and save your pick time.Easy install to your grill,Perfect fit, work well,made your grill like new again.Make sure you measure the size, check the shape of your original parts, and make a comparison with our parts before place order.
colleen h
Reviewed in the United States on January 2, 2025
There were no screws or bolts included to attach it
Steve
Reviewed in the United States on April 5, 2025
Delivered quickly and as advertised
Kiara Begazo
Reviewed in the United States on April 13, 2025
These replacement parts fit my Charbroil grill perfectly. They were easy to install and made a big difference in performance. It’s been a year since I installed them, and my grill still works great and looks in good shape. Definitely worth it!
Scott G.
Reviewed in the United States on August 11, 2024
This is the flame pattern before and after burner replacement. The original flavor bars were in horrible shape. Very easy to install, no directions but they are not really needed. Great product!
Peter R Munoz
Reviewed in the United States on June 30, 2024
The quake of the finish and material is excellent.
M. Freeman
Reviewed in the United States on March 2, 2023
There are three things on my eight-year-old Char-Broil grill (model 463722312) that have needed replacement over the years -- the "cooking grid" (the thing you put the meat on), the heat plate (the metal tent that covers the burner), and, it turns out, the burners themselves. This covers two of those three at a very modest price. The heat plate was in obvious need of replacement because it was rusting out a bit, but I might not have noticed the deteriorating state of the burners if I hadn't hadn't lifted up the heat plates and gotten a good look. So, I was very pleased to have those as part of this package, too. All were a perfect fit for my grill, although your mileage may vary. The challenge was getting the screws holding the old parts in place out, but that's not the fault of these parts. I'd been expecting to replace the entire grill this year, and I think this has extended its life for a couple years. Very pleased about that.
Mario Villeneuve
Reviewed in Canada on September 8, 2022
Prenez bien votre mesure et ça ira!
Dan P.
Reviewed in the United States on July 8, 2022
I'm not complaining, this is a good deal. Just a few things to note.1) Fits, works, functions as designed. Grill now has good flame and much more even heat.2) No instructions. If you need instructions for this you'll need to look elsewhere, but I found it quite intuitive for the most part and had no issues.3) There was an extra connecting tube (carries the flame between burners) in my kit, along with extra screws & washers. I assume they make several of these kits, and this way they only have to include a single hardware bag for 3 or 4 burner grills. Again not a problem but you might be confused - see point #2.4) Heat diffuser plates are kinda thin. I'd have liked to see the same kit offered with the porcelain coated plates that Votenli also sells. Would have been a little more expensive but I'd have bought it.5) Finally, one thing I needed this kit to have differently is a set of nuts for the screws at the back end of the burner tubes. It includes screws, but the grill holes are way to big and not meant for just screws. Original hardware used machine screws plus a nut on the underside, but mine were pretty corroded and not fit for reuse. So the burner tubes are just resting on the supports. But I don't move the grill, and it works.
MoonLite Productions
Reviewed in the United States on April 22, 2020
The parts fit perfectly. The package price was a good deal. They seem sturdy enough to last at least for a little bit (then again, so did the original parts lol). At least for now they are working just fine.
Recommended Products