Your cart is empty.

Silicon Carbide Hot Surface Ignitor - Nitride 120V Replacement for Gas Furnace Hot Surface Ignitor Igniter Replacement of 20165703S

4.7 (5) Write Review

Free shipping on orders over $29.99

$32.87

$ 14 .99 $14.99

In Stock

Qty.:

The hot surface ignitor is premium nitride construction, White high temperature Teflon coated leads, OEM spec lead size connector for quick mount
Rated voltage: AC 120V +/- 10%-15%.50/60HZ; Coldresistance:18-40 ohm (Ω)； Rated current at 17 sec: 1.1-1.2 amps，voltage:l120v-132v. You can measure whether the Hot Surface Ignitor is working properly with a multimeter
Hot side igniter/igniter temperature: >= 1100°C at 102V/ 17 seconds . >= 1180°C at 120 V/ 17 seconds ,>= 1400°C at 132 V/ 17 seconds .Common repair replacement with HVAC CONTROLS, Janitrol, Furnace, Janitrol Furnace, Amana Goodman etc Furnace Hot Surface Ignitor/Igniter
Compatible models: DMS90453BXA, P1256701F , P1256707F , DMS90703BXA, P1256702F , P1256708F , DMS90704CXA, P1256703F , P1256709F , DMS90904CXA, P1256704F , P1256710F , DMS90905DXA, P1256705F , DMS91155DXA, P1256706F , GCS90453BXA, P1257201F , P1257207F , GCS90703BXA, P1257202F , P1257208F , GCS90904CXA, P1257204F , P1257209F , GCS91155DXA, P1257206F , GCV90704CXA, P1257803F , GCV90905DXA, P1257805F , GDS80453AN, GDS80453ANAA , GDS80453AX, etc Item Igniter
General Purpose Silicon Nitride Hot Surface Igniter For LPG/NG Every Gas Type , and easy to replace and install.If you have any questions or uncertain information, you can contact our MOFLAME technical consultant through the Amazon platform, and we will provide technical assistance within 24 hours

Product Description

Silicon Carbide furnace Hot Surface Ignitor

Furnace Silicon Carbide Hot Surface Ignitor has been replaced by a more durable Silicon Nitride Igniter. The same part number, but a different look and more durable. Lasts LongerR
eplacment used in the following furnace models:

DMS90453BX：AP1256701F，P1256707F

DMS90703BXA：P1256702F，P1256708F

DMS90904CXA：P1256704F，P1256710F

DMS90904CXA： P1256704F，P1256710F

DMS90905DXA: P1256705F

GCS90453BXAP: 1257201F,P1257207F

Hot Surface Furnace Mini-Ignitor

Compatible models: DMS90453BXA, P1256701F , P1256707F , DMS90703BXA, P1256702F , P1256708F , DMS90704CXA, P1256703F , P1256709F , DMS90904CXA, P1256704F , P1256710F , DMS90905DXA, P1256705F , DMS91155DXA, P1256706F , GCS90453BXA, P1257201F , P1257207F , GCS90703BXA, P1257202F , P1257208F , GCS90904CXA, P1257204F , P1257209F , GCS91155DXA, P1257206F , GCV90704CXA, P1257803F , GCV90905DXA, P1257805F , GDS80453AN, GDS80453ANAA , GDS80453AX
Replaces Parts: 41K5601, LB-109261A, 768A-844

Product information

Rated voltage:AC 120V +/- 10%-15% .50/60HZ;
Cold Resistance:18-40 ohm Ω (Ref)
Steady current:

<=1.1 amp -120V (Ref)

<=1.2 amp - 132 V (Ref)

Wire long :5 inch
Temperature at 102 V/17 Sec >=1100°C
Temperature at 120 V/17 Sec >=1180°C
Temperature at 132 V/17 Sec >=1400°C

Good

Reviewed in Canada on December 18, 2024

Very good price

Customer

Reviewed in Canada on August 13, 2023

Replacement of a faulty part

Wally

Reviewed in Canada on May 22, 2023

The right configuration for my furnace.

staccata

Reviewed in the United States on March 9, 2023

I had multiple two prong versions of these that went out pretty quickly. This one seems to be holding steady so far. And easy to install.

Clarence Davis

Reviewed in the United States on February 1, 2023

Needed ignitor desperately. Purchased and discovered furnace cable is male too. Mea culpa. Furnace is Train (sic). Imagined home exploding due my inexperienced install. Family Ultima. Returned. Thank you for reading.