Your cart is empty.
Your cart is empty.1
Alex
Reviewed in the United Kingdom on May 2, 2025
Good quality and has a hole to be able to touch then mute and unmute button
ABCs
Reviewed in Canada on March 21, 2025
This is a pretty good quality microphone cover. It arrives in a flat box which initially worried me, but after taking it out of the box and leaving it alone for a while it sorted itself out into the original shape and actually putting it on the mic did the rest. It works well and is certainly an improvement over not having a cover at all. The foam is good enough that unless you are talking VERY close to the mic, wind/plosive noise is reduced considerably. You will probably still hear things like a mechanical keyboard or loud backgrounds. It does feel a bit denser than other foam screens I've tried, but I don't necessarily feel like it performs drastically better.For $16 CAD at the time of review, it is a bit on the expensive side for one cover. That said, this is a somewhat specific shape for a particular microphone and it does fit well, so you are paying for the specificity/looks and that may be worth it.
Metroknight
Reviewed in the United States on March 13, 2025
This is a simple high density foam filter that keeps your voice from popping on the microphone. It can fit many different mics with a little bit of trimming. I tested it out on a comica mic and a no name square mic. It worked fine on both of them but if I was going to use it full time on one of them, I would have to trim the length down.If you are into having RGB mics then realize that it will block/ cover up the RGB of the mics.
Alain T
Reviewed in France on March 10, 2025
⬜ Tests et premières impressions----------------------------------------Une protection pour micro très efficace.🟢 Les points forts +----------------------+ Résistante.+ Lavable.🟠 Les points faibles -------------------------- Rien à signaler.🟨 Rapport qualité-prix----------------------------▫️ Excellent.(Pour moi, le rapport qualité-prix est un critère essentiel).📝 Mon avis--------------⭐⭐⭐⭐⭐▫️ Un produit de qualité.📊 Mes critères de notation--------------------------------▪️ 5 étoiles :Excellente recommandation. Le produit répond parfaitement aux attentes en termes de qualité, de performance et de satisfaction.▪️ 3 à 4 étoiles :Produit recommandé, mais avec quelques points à améliorer. Certains aspects peuvent ne pas convenir à tout le monde et des réserves seront précisées.▪️ 1 à 2 étoiles :Pas vraiment conseillé. Le produit présente des défauts notables qui peuvent affecter son utilisation ou sa durabilité.💡 Informations------------------Ce produit m’a été envoyé gratuitement dans le cadre du programme du Club des Testeurs (Vine). Je n’ai reçu aucune rémunération pour l’évaluer. Mon avis est sincère et objectif, basé sur mon ressenti lors du déballage et de son utilisation sur une courte période. Il reflète uniquement mon expérience personnelle et pourra être ajusté si nécessaire avec le temps.
Hardy
Reviewed in Germany on April 9, 2025
Auch wenn der Mikrofonschutz den Bildern nach für ein bestimmtes Mic (HyperX QuadCast S?) optimiert sein soll, habe ich von den Bildern her gedacht, dass ich das mal ausprobieren sollte.Denn ich habe einige Mikrofone von Audio Technika der 40xxer Serie, bei denen das bei dem einen oder anderen Aufnahmeprojekt praktischer erscheint, als ein Plopp-Schutz am Schwanenhals, der immer "auf Richtung" gehalten werden muss, bzw ungeübte Sänger/Sprecher aber immer Vorbehalte haben, etwas "nah vorm Mund" zu haben.Wie man an der Bildern sieht, ist der Schaum einen Tick zu groß, aber besser so, als anders herum! Als Referenz, wer selber bei seinen Schäfchen mal probieren möchte: Die AT's haben einen Durchmesser von ca 53mm. Ich würde also mal sagen, dass es nicht sehr viel dünner sein sollte, aber 60mm Durchmesser problemlos möglich sind (z.B. AKG C2000/4000, Perception 220 o-ä.).Der Schaum fühlt sich ansonsten recht wertig an, und ging auch recht gut wieder "auseinander", denn dass er in der Packung so extrem flachgedrückt ist, hatte mich erstmal nicht so begeistert. Aber, gutes Zeichen, dass er das mitmacht. Wie das mit der beworbenen Waschfähigkeit ist, habe ich nicht überprüft... bei Vielnutzern, insbesondere mit feuchter Aussprache, ist das natürlich wirklich ein begrüßenswertes Feature.Vom Preis-Leistungs-Verhältnis geht das in Ordnung, im Vergleich mit dem AKG W4000 etwas dünner, aber auch nur weniger als halb so teuer...
KleverKitty
Reviewed in the United States on April 5, 2025
I got this not for the microphone they say it's for but for a different one and it fits. I'm happy with that!It's very basic but I'm happy it fits my mic.It does what it's supposed to do.
Melodie Parson
Reviewed in the United States on April 30, 2025
I'm not sure why, but this took weeks to arrive. I'm glad I didn't need it immediately. That being said, this is a good foam mic cover. It is huge...actually bigger than I expected, so it will fit pretty much any fat mic. What else is there to say? It isn't too thick or thin, it functions as it should, and my mic sounds better when I use it.
sdfd57
Reviewed in the United States on April 30, 2025
So it does what its supposed to do, its snug and thick, OK feeling foam and feels decent quality. It does function as a pop filter and it sounded better than without. Issues that I had with it after using it for multiple months, the hole on top isn't big enough to mute your mic, constantly miss the button, and forget about the RGB on the mic you can't see through the foam. Overall for the price worth it if you don't care about the RGB
Nick
Reviewed in the United States on April 27, 2025
This foam cancels out background noise which is nice due to its thickness. The top has a hole in it providing additional ease of use and allowing you to mute the microphone when needed.I have a desk fan in my room and noticed that it cuts the sound down where it isn't audible on Discord.Overall, a great item to have for this microphone.
Person
Reviewed in the United States on April 24, 2025
Works. It's a foam cover. It fits on mics. It limits the sound of air and other ambient noise.
Tall Drummer
Reviewed in the United States on April 2, 2025
What do you want in a microphone foam windscreen? You want it to fit, check. You want it to block the wind, check. And you don't want it breaking down into little foam pieces, check. This microphone screen checked all of my requirement check marks and I am pleased with this order and will use this until I can't.
Lalaland84
Reviewed in the United States on April 12, 2025
This foam cover is a perfect fit for my HyperX QuadCast S mic! It slips on easily and instantly upgrades the look and function of the microphone.The high-density foam does a great job at reducing pops, wind noise, and breathing sounds, making my recordings and streams sound much more professional.It also helps keep dust and moisture off the mic, which is great for long-term use. The material feels durable and doesn’t degrade or shed like some cheaper versions.
BSL
Reviewed in Canada on April 10, 2025
Fit my condenser microphone nicely, and I can tell the foam is of great quality, definitely high density. I have used this for both gaming and recording instruments, in which it has definitely improved my microphone’s ability to produce a clearer sound as I have been told by the people I play with and also noticed in the recordings I made. Very happy to have this protective microphone cover on my condenser microphone as the improvements have been noticeable.
Recommended Products
