Shopping Cart

Your cart is empty.

Your cart is empty.

Spec-D Tuning N1 Style Exhaust Catback System Compatible with 1994-1997 Honda Accord 4-Cylinder Models

Free shipping on orders over $29.99

$149.95

$ 72 .99 $72.99

In Stock
  • ✔️ FITMENT: Compatible with Honda Accord 1994-1997 (4 Cylinder ONLY).
  • ✔️ Items are Exactly the Same as Shown in the Images! You Will Receive the Exact Item You Purchased!
  • ✔️ Installation Made Easy on All of Our Items! Little to No Modifications needed at Best!
  • ✔️ 30 Days Refund & 90 Days Defective Item Replacement Warranty! Any Issues With Your Item Please Call/Email Us and We Will Help You!
  • ✔️ All of Our Items are 100% In Original Packaging! You Will Never Receive a Used Item From Us!


Brand new in original packaging. Exactly the same as shown in the picture! Made of high quality full T-304 stainless steel with shinny chrome finish. Japanese N1 style. Comes with removable silencer. Increases up to 15 hp. Deep smooth tone guaranteed. CNC mandrel bent. Comes with gaskets, hanger and bolts. 4" outlet tip 2.5" piping Do not come with installation instructions. Professional installation highly recommended. Fitment : 94-97 Honda Accord (4 Cylinder ONLY)


Samantha Frase
Reviewed in the United States on January 4, 2025
Love it! Worked great for my Honda accord
Joshua
Reviewed in the United States on March 22, 2021
You get what you pay for..doesn't fit very well..all the flanges were welded on crooked so some of the seams didn't seal up all the way and is also causing to to set funny under the car..
MarkM
Reviewed in the United States on March 5, 2018
The media could not be loaded.
Zach
Reviewed in the United States on March 21, 2014
you deff get what you pay for the exhaust was junk didn't fit my car at all and sounded like crap
Shumanfoo
Reviewed in the United States on December 2, 2014
Came Neatly Packaged. No instructions, but fairly easy to figure out. My son has a garage pit so we could drive over and work beneath the car. If you don't have a lift or access to a pit then I think this would be tough to do. It is also a 2 man job.But the parts fit well and the car is louder than before the pipe split but certainly working OK.I'd recommend
kH
Reviewed in the United States on November 16, 2014
You get what you pay for its cheap so don't expect anything great but if you are looking to keep your car on the road and legal this is perfect. After reading other bad reviews on this product I took their complaints and turned it to positive. So as for the rusting of the welds I bought a $4 high heat paint and painted all the welds. Took me ~1hr to install by myself depending you may need longer exhaust hanger rubbers due to clearance to eliminate any rattling I only needed one by the rear passenger tire everything else fit. Sound is ok a little loud but it is an aftermarket exhaust Sounds best in my opinion between 3000-4000 rpm.Don't let other customer reviews discourage you if you want something nice and of better quality then go spend the money. If you are just looking to replace a rusted exhaust this will work and it doesn't look to bad.Installed on a 1997 accord SE sedan
FD200
Reviewed in the United States on April 17, 2014
First off this went on my 97 honda accord. The whole project had its ups and downs and required 5 hours of labor and had its goods and bads.Bad: Box came ripped half open and beat up, one hanger was sticking out the box! It also had a nice sized dent in the outside tubing of the muffler like someone dropped it. It came incorrectly bent so its a tight fit around my rear suspension. It didnt help that the bolts to my catalytic converter were completely rusted which required several hours of grinding and drilling just to get the old bolts out. This was the hardest part. Had to cut old rubber hangers for it to fit in the existing hangers.Good: Looks sweet and fits somewhat right. After install sounds great, not raspy or farty. throaty sound. somewhat cheap and if not rusted bolts on the cat could be an easy install. Comes with all the hardware and gaskets.Advice: ONLY BUY IF SERIOUSLY NEEDED. Not an easy project just for kicks, it was not a quick process for two people with 50+ years of experience. Buy some rustproof, high-temp spray paint and paint over all the welds with two coats. This will protect the untrustworthy foreign welds from rusting out quickly. Then spray the connections after install. Jack the car up as high as possible.
josh correll
Reviewed in the United States on July 7, 2013
sounds awsome very smooth quite in cabin very deep sound i have it paired with the i4 race headers i got on here also at a great price large power gains very tight fit it takes time and patience but it looks great if you put the time in
Recommended Products

$689.99

$ 99 .00 $99.00

4.8
Select Option

$349.99

$ 99 .00 $99.00

4.9
Select Option

$221.99

$ 99 .00 $99.00

4.6
Select Option

$665.01

$ 99 .00 $99.00

4.9
Select Option

$43.99

$ 20 .99 $20.99

4.9
Select Option