Your cart is empty.
Your cart is empty.The Spectre 3 inch Aluminum Mass Air Flow Sensor Adapter Kit is designed for most GM, Ford, Nissan, Honda, Toyota and other vehicles with drop-in style mass air flow sensors. Featuring a polished aluminum body, this kit contains 3 flow calibration tubes measuring - 2 1/4, 2 1/2 and 2 3/4 inchs. This bracket can be welded or couplers can be used to attach to intake tubes, reducing the 3 inch intake system to the correct diameter at the sensor to retain calibration. This kit also contains 5 mass air flow sensor adapters and screws for an easy install.
Mikael
Reviewed in Canada on May 5, 2024
This resolve my problem 👍🤘🏻
Ronald and Donna
Reviewed in the United States on October 2, 2024
For those who don't know what this is for, it's so you can bolt up your mass airflow sensor properly, for when you swap in a cold air intake, and it works perfectly for that, Installed it on my Pontiac Vibe, and the car ran perfectly fine, and gave no codes in regards to mass air flow.
JT Reworks
Reviewed in Canada on October 29, 2023
I had to buy this to get the proper size adapter for the cold air intake for my car from the same company. Seems decently built but the MAF adapters may hold the sensor out of place as it adds additional thickness.
Kelvin Vu
Reviewed in Australia on September 15, 2022
The MAFS adapter fits perfectly without the reduced adapters. Could of been 5 stars but paid $122 AUD and couple days later price went down to $87 AUD
Matt Bizz
Reviewed in the United States on August 28, 2022
Fit perfectly in my 2005 Subaru Legacy GT. Had the correct harness for the MAF and is mad out of nice quality metal that hasn’t warped in the 2 months I’ve been using it(and my car did over heat a couple times too, still held shape) if you’re debating getting this over a plastic MAF housing I really recommend you go w the aluminum one as it won’t warp (had a plastic one prior and it ended up warping all over and was causing massive leaks in my system)
Luis P.
Reviewed in Mexico on August 13, 2021
Diseño incorrecto de los adaptadores no es funcional
Wiplock
Reviewed in Australia on July 12, 2020
Came with everything I needed to adapt my maf sensor into my new intake system. Interchangeable reducers ensured I had no issues with engine lights or rough running!
Customer
Reviewed in the United States on May 18, 2019
Item is as described. Unfortunetly although it states fits most gm`s it does not fit 2013 Silverado 5.3 Outside that it looks smart has all the components required,
Jordan
Reviewed in the United States on March 3, 2019
2007 Subaru WRX- I read reviews, some good- some bad. But for me, it arrived two days after ordering. Parts came inside a soft black pouch neatly stacked within each other like cups- then inside the box. A+ for packaging. Polished/ shiny, scratch-free aluminum, clean cut on both edges, came with all the parts I needed for installation. (3) sets of different length screws, (1) rubber O-ring, (5) Mass airflow sensor attachments for different set ups and (3) different sized inserts for perfect fitment on various diameter sized intake pipes. Overall a very nice product for the cost. I was actually impressed when I saw the quality compared to some people’s claims and reviews. Photos of the exact product I received are attached. Please be the judge based off what you see here.
Setesh0311
Reviewed in the United States on July 18, 2018
None of the MAF adapters fit and screws too short even if I did “rig it”. Complete waste of money. Pay more and get a quality part the first time so you don’t end up with an expensive paperweight!
Jr. Iza
Reviewed in the United States on April 7, 2018
seems like a good product but doesnt fit the MAF sensor on 2004 525i BMW E60 M54, and again like the last spectre product i tried the threading for screws are not accurate, they get stuck not even half way. only gave it 3 because it doesnt fit
AH.
Reviewed in the United States on September 12, 2017
First off, i want to say that in theory this is a great product. It's inexpensive, versatile and practical but in terms of application, it falls short.Complaints:1) The product is a soft aluminum, I would have expected a stronger aluminum or more preferably stainless steel.2) the welds are okay, but the bolts included in the packaging are not long enough to seat the adapters. Had to use the screws from my mass airflow sensor to mount the adapter to the sensor plate. This of course retapped the sensor plate since the threading was different. It did work but it was a surprise to see such a misappropriation of materials.3) the Finish is sharp and rigid, I would have expected them to round off or at least smooth out the ends. The one end actually cut into my pod filter during attachment.4) A little nitpicking, but I would have appreciated a mounting Loop welded to the adapter to secure the filter onto the fender or other mounting points on the car.With all that said, the adapter did fit the mass air flow sensor for my 2009 Subaru Legacy and the short ram intake was functional.This product would work for someone looking for an inexpensive option, but I will be returning the product and going with a more expensive/cleaner option.
AshHiro
Reviewed in the United States on May 8, 2017
Works perfectly for me, I noticed that some people mentioned that they are throwing an engine code as soon as they start, I'm gonna have to say from experience that I have done that before too on a different vehicle because I either put the Mass Air FlowSensor in backwards or forgot to plug it backafter being installed.I've been looking at getting a k&n full air kit, but I didn't want to throw in a $300+ full intake system and have regrets because my car is a 3.5l CVT transmission.So I bought this to test the waters on my 2016 Nissan Pathfinder aka, "path-slider" and I have to say that I really do like this.I will be saving up in the future to buy the full air intake system from k&n with the heat shield and smooth pipe to the throttle body.But thank you specture for giving me a budget friendly way to test the waters and also have it to test on my other vehicles.I would recommend getting this if you are interested in a more aggressive sounding engine and wanting to stand out from the crowd and feel like a true "fast and furious"😀✓Side note for you other car lovers, remember that it's important to have cool air and not too much "heat soak" you may get more power you may lose power but your car with sound like a total BAD ASS!! 😎
Recommended Products
