Your cart is empty.
Your cart is empty.This set of 5 stainless flavorizer bars from RiversEdge Products is an excellent replacement for your worn out porcelain bars. Made from 430 grade, 16 Ga. stainless steel, these bars are twice as thick and will give you many years of reliable service. Model 7537 fits the Genesis Silver B & C, Spirit 700, Gold B & C and the Weber 900. PLEASE NOTE: Weber makes many similar-sounding models. Double-check the length of your existing bars before ordering to save yourself money, time and frustration. Manufactured in Broseley, Missouri. 5 year warranty against stainless pitting or failure. RiversEdge has yet to have a warranty claim on any Flavorizer bar in all the years of manufacturing.
Hubb
Reviewed in the United States on March 22, 2023
I grill at least 10 times a week all year on my Weber Genesis Silver B purchased in 1999. I have replaced the flavor bars (as well as other parts) several times. Grill still functions like brand new. Since I purchased all flavor bars through Amazon I have a good record of what I paid and how long they lasted. I purchased this brand from this company back in 2013. They lasted 7 years. I purchased new OEM porcelain coated ones from Weber in 2020. They have now lasted only 3 years. From a price perspective at that time I paid a premium of about 40% for these USA flavor bars that lasted more than twice as long. (I see now the OEM Weber bars on this site are now even more expensive than these.) That is why I am buying these again. Last longer and a better value.
Marc Slavin
Reviewed in the United States on August 9, 2018
Theses replacement flavorizer bars are very well made. Exact replacement for the worn out bars that came with the grill. I look forward to many years of service from this purchase. I’m very pleased with them. They hold heat much better than the old stock bars. If you are looking for replacements, look no further! Excellent product and very well priced, add to this made in USA!
McGuirk
Reviewed in the United States on August 20, 2018
Fast shipping, Solid build, Fit perfectly, Thick and heavy SS, and best of all half the price of Weber's offering. Just make sure you remove the protective coating by peeling, and you might want to wear gloves if you are worried about slicing a finger. I did 2 sets without gloves without a problem, though. Don't hesitate to get these if your existing bars are 22.5" long and your burner controls are on the side.
DP
Reviewed in the United States on July 22, 2018
I have a Weber Genesis Silver C, three burner grill. The bars fit perfectly and are a heavier gauge than the original standard steel bars.Contrary to what some of the reviews state, these bars are stainless steel. But yes, they will hold a magnet. There are many grades of stainless steel. These bars are probably ferritic or martensitic stainless steel, which is a lesser grade of stainless.The bars come packed well and have protective plastic film that must be removed before placing them in your grill. The edges of the bars are not smooth, so care should be taken when removing the film.I did not experience any smoking on first use, as some reviews stated. I’ve had the bars for about a month and have not seen any rust or corrosion on them. I’m on Cape Cod and near the beach, so there’s plenty of humidity and salt air to cause rusting and/or corrosion if it was to occur.I rate these much better then the OEM bars and they are priced right.
Bob D.
Reviewed in the United States on April 28, 2016
I have a 15 year old Genesis Silver B, these bars fit it perfectly. RiversEdge has done a fantastic job making these. They cost less than the enamel coated steel bars Weber makes and much, much less than the Weber SS ones. They're also a heavier gauge so they should last longer.I have replaced the bars several times over the years and it seems the Weber ones last shorter each time I replaced them, the quality seems to have gone downhill. The last set lasted just two seasons and the grill had uneven heating since they were in. With these heavier bars, the grill now behaves like new. Gets hotter and more even heating over the entire grill surface.Time will tell if these last longer. But even if I do get just two years out of them, I would still buy these again just for the performance increase over the stock replacement bars Weber now sells..
John in N.H.
Reviewed in the United States on June 1, 2015
Very ,Very nice...but Holy S@#t are they SHARP !!!! Read and Heed the warning on these as you peel the protective layer off, these babies need to be handled carefully!!! They included a warning, and I was careful, but still, they were LASER sharp, I wish I could get my knives that sharp !! That said, these were very nice, thicker than original, and fit well, have held up fine and I know these won't rust like the Originals did (6 yrs). I put them on an older Weber Genesis Silver and I'm impressed with the quality. Also bought BBQ factory 9930 BBQ Stainless Steel ROD Replacement Cooking Grate for the same Grill and those were Great...( no pun intended) as well. My old Weber is up and running ,rust free and clean for another few years and I'd surely recommend to friends. Less $$ than local box store, and higher quality...Win/Win in my book. (just have Band-Aids ready while unpacking) !!! Good deal and very happy - Johnny NH
Firoze Rao
Reviewed in the United States on August 13, 2013
Better than the OEM parts that came with the grill. The OEM porcelain bars rusted through, don't ask me how; but I guess Weber uses cheap steel under the enamel that will eventually rust.So, I decided to go with Stainless Steel, plus that these are 16 gauge means they should last a little longer. Also being heavier gauge means that they do take a few minutes longer to heat up to temperature. But once they are hot they hold their heat longer.Flavorizer bars are a misnomer, they are really there to compensate for the lower heat values of gas grills as opposed to charcoal grills. The flavor part comes from when stuff drizzles on the bar and vaporizes and creates a sizzle, smell and aroma. But it sounds so much better than calling them sizzle bars or smell bars or aroma bars.So marketing hype aside, if you want a high quality product go for this. If rapid temperature heating is your thing get Stainless in a thinner gauge of steel.Most importantly get out there and GRILL, like your cave man instinct drives you.
CheckJV
Reviewed in the United States on October 29, 2013
These bars (7537) are a perfect fit for my Weber Genesis Silver B grill. Use the Weber site to determine which bars will fit your Weber grill. These aftermarket bars appear to be well made and they are thicker than the original. Have grilled once with them and they glowed nicely and performed well as a heat sink (which is really the bars function, the "flavorizer" name is pure marketing on Weber's part). They are VERY sharp on the edges. There are warnings all over the packaging and instructions about sharp edges. Be careful when opening, removing the protective vinyl film, and installing. These stainless steel bars should last longer than the originals (9 years for me).
Recommended Products
