Your cart is empty.
Your cart is empty.PRO Series Maxi Fused Power/Ground Distribution Block with One 4 Gauge Input and Two 8 Gauge Outputs
brett lovell
Reviewed in the United States on September 9, 2024
The design of the cover fits but it does not stay in place.Design quality is nice but gets a 3 starDesign functionality is 5 stars
Dave's Automotive and, Sons
Reviewed in the United States on March 25, 2024
Came nicely packaged! Great heavy duty block! Plastic cover snaps on well! Kind of a tight fit with 4awg but, not really a bad thing depending on your set up. Would have been nice it this came with the 3 screws needed to secure the block down.Over all, very good product from Stinger off road!
Brian Earl Spilner
Reviewed in Canada on September 7, 2023
Plastic doesn't hold tight. Had to tape it shut
Quentin
Reviewed in the United States on September 24, 2023
The fit and size are great with making laying out amp rack easily works perfect
Trevor
Reviewed in the United Kingdom on May 26, 2022
From 4g to 8g wire . Dose what it says on the tin, I would definitely recommend for your setups.
Al
Reviewed in Canada on March 1, 2021
I was a little disappointed when I couldn’t fit my wire, although they were 4 gauges but then I realized you can pull out the little cylinder piece and it fit nicely! 3 stars because of the lack of fuses which makes me a tad bit paranoid.
Jv
Reviewed in Canada on February 23, 2021
Look nice but cheaply made.
Brian R.
Reviewed in the United States on July 9, 2020
Very well made, love the sleeves for the smaller gauge wire. Very well made, especially for the price. Used this to wire my four 8 inch sube in my pickup. Did a series/parallel setup and this was perfect. Used 8 gauge wire from the left and right side inside the box to a single lead to a single SMD terminal. Made a huge difference, subs get more power now than when I ran smaller wire to the two terminals that came on the enclosure also would work great for a two amp setup or a single sub amp and a power inverter. Only con is the plastic cover doesn't secure very well, but in my case it's mounted inside the box so it's not necessary anyway.
justin
Reviewed in Canada on December 22, 2018
So far I'm happy with it and it seems like a quality product. I like that the 8gauge sleeves pull out and I got 6x 4gauge wires in it and will update once I get it finished and installed of how it works out. (I have added pics of Speaker box)
B. Veni
Reviewed in the United States on July 5, 2013
Whatever you need this item for...get it. It is worth more than the asking price. It is a solid and heavy duty distribution block. it will NOT break and it will NOT come apart. stinger has the best products for audio solutions that isn't overkill. they are high quality and will work as advertised. if there is a problem with your system..99% of the time it isn't the stinger product. get it dont think twice
wdguy
Reviewed in the United States on February 18, 2013
You can branch two cables onto 4 cables. Very versatile, especially if using for expanding same polarities. Don't forget to discharge your Caps or pull inline fuses for install, then recharge Caps using a the discharge resistor. I use a 3157 bulb and trickle charger, takes a little over a min for a several Farad Cap to charge or discharge (finished when light dims and then goes out). Easily mountable and cover protects cross circuit exposure.
T
Reviewed in the United States on December 1, 2013
I originally wired my 2006 Honda Civic LX for 1 amp but later decided I wanted another one. This block was perfect since I used 4 gauge wiring to my trunk and then I just purchased some short 8 gauge copper wiring to go the last few feet to my amps. I uploaded a picture of mine installed.
Steve
Reviewed in the United States on September 29, 2011
I knew exactly what I wanted and this was one of the very few out there. I used it to hook up two amps all with 4 gauge wire. Having both in one unit was great for a clean install. Great durable quality and does the job. I highly recommend.
Recommended Products
