Your cart is empty.
Your cart is empty.
★ Luminosity: Green
★ UV Color: Green
★ Daytime Color: Off-White with a Light Green Tint
★ Particle Size:
When fully charged this top performing premium blue powder will glow at 3620 mcd/m2 after 1 minute, level off to 110 mcd/m2 after 1 hour and will continue to glow for over 15 hours. Green glow in the dark powder glows the longer and brightest of all glow powders.
Compatible Mediums
Glow powder can be used at a 1:4 or 1:5 ratio with resin, epoxy, paint, glass, nail polish, clay, rubber, cement, ceramic, silicone, glaze or glue. It is not soluble, heavier then water & odorless. It needs a medium firm enough to hold the pigment in place. Glow powder is the basic ingredient for most glow in the dark products used by consumers, businesses, education and government agencies, artists, scientists etc.
Glow Information
Glow in the dark powder can be charged, and discharged indefinitely, making them very economical to use. It will charge by any UV light from the higher spectrum such as sunlight or a white light bulb and also glows under a black light. Made from Strontium Aluminate doped with rare earth elements Dysprosium and Europium. Europium is the most reactive earth element ever discovered. It can give an astonishing glow time for as long as up to 30 hours, which puts it at the cutting edge of technology.
Safety Information
Environment friendly, not toxic, hazardous, flammable or radioactive. Contains no soluble heavy metals. Not food safe. Not tested on animals.
^^ Scroll up and grab the best green glow in the dark powder today!
DStubitsch
Reviewed in the United States on September 10, 2024
I made some resin items with glow in the dark powder. Some colors glow more brightly than others and this one is quite bright.
A Customer
Reviewed in the United States on July 5, 2023
None of these things are magic, so don't expect too much. But this formula definitely works better than some cheaper stuff I recently bought.It "charges" more than the cheaper stuff just from ambient light in a medium-bright room. Leave both side-by-side for an hour, turn off the lights, and this one is brighter.And it's better at passing the light along to the inner parts not directly exposed to light. With the cheaper stuff, only the very surface gets charged, even with powerful direct light. This good europium-whatever powder will be glowing even on the bottom part, so I assume you can mix in a denser amount into whatever you are making to maximize brightness and it will still get fully charged.
Steve
Reviewed in the United States on June 4, 2022
For now, I plan to use the green stuff to paint onto the top part of door frames so that if our big earthquake comes, and everything goes dark, I can still get myself oriented to where I am.Later, maybe do the bottom of my outdoor bird bath with the aqua, if a splotch of the green stuff can take constant submersion.And I have an outdoor decorative rock I'd like to paint with this stuff. Used as a positional sentinel in the event the place goes pitch black, otherwise, just an ornamentational curiosity.
T. Wise
Reviewed in the United States on March 31, 2017
Absolutely AMAZING! My children are avid users of fidget spinners and were looking for another level of excitement in their spinning experience. Most high end spinners with glow elements use Tritium which is a radioactive isotope of hydrogen and while toted as being safe I just couldn't take the chance as a responsible parent.Techno Glow came highly recommended from my social media spinner group and for good reason. This stuff is amazing! Upon arrival I opened the envelope and it was actually glowing from the residual light allowed to pass through the packaging. A quick test charge with the lamp and BAM, the bag was filled with an amazing green glow. The weekend project is to mix the powder into an epoxy and load it into sectional areas of my kids spinners. They are so excited!
Brian M.
Reviewed in the United States on July 27, 2016
The beezneez!!! I used this to paint a mess load of stars on my ceiling and golly does my room light up at night, glows pretty bright for about 30 minutes and then has this cool after glow that goes all night. Pretty amazing with a black light too, bloody awesome really. The stuff is encapsulated so it's fine for water based mediums, so I used clear acrylic paint as a medium. I did roughly 2 1/2 parts powder and 1 part paint, even though the powder is talcum powder fine, it certainly dries rough. But no worries, my light switches are clearly marked in the dark now! You looking for something that glows silly bright?? Well you found it!
PeaceByJesus
Reviewed in the United States on April 5, 2016
I have not found this to be exceptional, considering it is called "Ultra" Green. I mixed approx. 1oz powder to approx. 2 oz of neutral Tulip fabric glow paint but it does not seem as bright (after being charged) in the dark than another brand (GloNation i think).
Dialed In DIY
Reviewed in the United States on November 27, 2015
I have been using this in several fun DIY projects. My two favorite so far can be duplicated via the following YouTube videos (Dialed in DIY):1. NEW: Improved, bigger, reusable DIY glow sticks: [...]2. Make Reusable Glow Sticks: [...]3. How to make "Glow Stars in 3D": [...]Thanks for the great product!
S.V.L.
Reviewed in the United States on October 31, 2013
I got this product a few days ahead of the estimated shipping time, and it also had a detailed sheet including safety information. I had used this product for an enamelled piece and it still glowed well after being fired in a kiln at 1500 degrees farenheit. If anyone wants to use this product for glow in the dark enamelled pieces I would recommend this product as well as this seller.
Recommended Products
