Your cart is empty.
Your cart is empty.R.G
Reviewed in Germany on March 25, 2025
Der Lichtschalter funktioniert einwandfrei ,lässt sich einfach anbringen und wurde schnell geliefert. Ich würde ihn immer wieder bestellen.
NT
Reviewed in the United States on March 24, 2025
this is an excellent product, one of the best electrical advancements of all time.
Robbi-Trainer01
Reviewed in Germany on February 3, 2025
Der THINKBEE Funkschalter ist eingesetzt, um einen historischen Keller zu beleuchten. Dort würden Stromleitungen stören.Fazit: Ich bin extrem zufrieden. Funktionierte auf Anhieb und exakt wie in der kleinen Anleitung beschrieben. Schalter und Funkrelais sind 10m entfernt und durch Mauer und Türe getrennt. Der Schalter ist ganz flach und sieht wie eine Unterputzinstallation aus. Das Funkrelais habe ich in einer Installationsdose untergebracht. Das Pairing, also das Herstellen der Funkverbindung zwischen Schalter und Funkrelais, klappte aufs erste Mal einwandfrei. Auch wenn das Teil aus China kommt, sind Design, Qualität der Kunstoffteile und die Funktion sehr hochwertig.
Andres Ferrari
Reviewed in the United States on April 30, 2025
Lo uso para encender dos lámparas en lugares separados de la habitación que antes no las podía encender desde la entrada de la misma. En mi país el voltaje es a 220v
Kindle-Kunde
Reviewed in Germany on April 18, 2025
einfache Installation, vorverkabelt inkl. Wagon Klemmen. Hat auf Anhieb funktioniert.
Billy N
Reviewed in the United States on September 20, 2024
Works great. I used these in my shop's office, where I swapped florescent tube lights to LED tube lights and wanted to control the fixture assemblies independently. Super easy to wire this together, and then pairing it with the wireless switch was even easier.
Uwe Maack
Reviewed in Germany on August 9, 2024
Wir haben das Lichtschalter Set gekauft, damit unser kleine Sohn auch an den Lichtschalter kommt. Die Gebrauchsanleitung ist in Englisch, was nichts aus macht, wenn man in Physik aufgepasst hat. Der Lichtschalter lässt sich schnell montieren und ist genau so leicht zu programmieren um eine Verbindung mit dem Empfänger an der Lampe zu bekommen. Beim Kauf bitte auf die Größe des Empfängers achten. Bei uns passt er nicht in die Abdeckung der Lampe.Das Schalter Set funktioniert einwandfrei.
R. Lawson
Reviewed in the United States on August 5, 2024
This product is amazing. I liked it very much. It's works well, and it just simplified installation. Trust me. You will love it.
Mike deBram
Reviewed in the United States on November 4, 2024
Positive- simply works as advertised. Turns off and on immediately. Easy to install. First wireless switch I installed was from a competitor that did not work properly, one of the two receivers wouldn’t pair to the switch and the one that was paired wouldn’t turn off reliably until pressed several times…Negative- concerned about battery life, more specifically when I need to change the battery. Case design uses adhesive tape to hold on wall and will have to be removed from wall to open case which ruins to tape. Needs a mounting base to snap on switch so it can be removed to change battery if needed.
Forest K. Duncan
Reviewed in the United States on January 13, 2024
Working well so far. I installed this about a month ago, to add remote control for lighting and ceiling fans in the same room. The two original switches, mounted in the same two-gang wall box, are not in a convenient location. I was able to fit the two receivers from this kit inside the box and behind the switches, with the new wireless switch unit mounted in a more accessible location.I did the installation this way because there are two separate light fixtures and two separate ceiling fans powered by this pair of wall switches. I would need two receivers for the two light fixtures and two more receivers for the two ceiling fans in order to make the connections according to the included instructions.Because of the crowded electrical box, I did not use the two "lever-nut" wiring connecters that are included with this kit. Instead, I connected the two Neutral wires on the receivers with the other 3 Neutral wires inside the wall box. Then, for each circuit, I connected the receiver's IN line wire to the light switch and the OUT line wire to the appropriate wire going to the light or fan. I wasn't sure that this would work, with all of the white Neutral wires connected together, but that's a pretty common method for wiring multiple outlets and switches. So far, everything is working great.My only complaints would be regarding the battery replacement for the wireless transmitter unit. The instructions are not clear at all about the procedure for opening the unit to replace the battery. I eventually figured out how to pry off the front of the unit, but I couldn't be sure that I wasn't going to break something in the process. The battery in the transmitter unit will eventually need to be replaced, and the instructions for doing that should be a lot better.I'm deducting one star due the frustration caused by inadequate instructions. (If I had broken the unit while trying to get into it, this would be a one-star review.)
Stefano B
Reviewed in the United States on April 2, 2024
This is one of the devices I used during a cosmetic home improvement project for one of my clients. I installed three lighting fixtures in a dark living room, and since I didnt want to open the walls for wire switches, I simply hard wired them, just above power surces, hardwiring them sneaking vertically the wires inside the wall. The little receiver hause perfectly in the electric box, and is super easy to connect and activate (just be mindful of the European color code, brown for the hot and blue for the neutral). My client is extremely satisfied and amazed about how I was able to do it without messing up with the wall. Many of the reviews mention the fact it stops working after about six months, so my review is valid now after the installation, will see in a while what is going to happen... the swithes are battery powered, so I might assume a dead battery can be the problem... will see.
Tom - Österreich
Reviewed in Germany on November 18, 2023
The media could not be loaded.
eSquared
Reviewed in the United States on November 6, 2021
Old house with no wall switch wiring options. I had two pull-chain lights in the same area to replace. Bought two basic dome lights. Removed the old lights. Easily installed the Thinkbee receiver in the ceiling light electrical box using the excellent provided wire connecters. Everything fit neatly into the ceiling box . Before completing the light fixture installation, the trick is to turn on the power and hit the pairing button on the receiver in the ceiling then try the switch until you can see and hear it is connected. You don't need the light fixture up to set up the pairing and check the function of the switch. Once pairing is confirmed, turn off the power, complete the light installation and turn the power back on. Your light will magically turn off and on. I set up two lights on on one double light switch in about 30 minutes. They work great. My friends are amazed too. Good product so far. Hope it lasts a long time!
Recommended Products
