Your cart is empty.
Your cart is empty.Product Description
Magnic Arm Helping Hand for Hot Air Gun / Soldering Wire / PCB Holder / Camera Monitor etc.
19.7” Magic Arm, Helping Hand Soldering with 2.6" Metal Clamp and Super Clamp w/ 1/4" and 3/8" Thread, Flexible Articulating Arms, Magic PCB Clip for Welding/Repairing/Monitor Camera/Video Rig/Phone/Lamp etc.
- The 19.7" super long magic arm can better meet your needs for length and space.
- 360°adjustable ball head design, and the articulated arm adopts an ergonomic wing nut, which is very convenient and can help you adjust any angle according to your needs.
- The design of the middle meshing teeth of the magic arm provides more stability and safety. The magic arm joint can be easily tightened by rotating the high torque screw.
- Due to the long-term use of the clamps, the rubber pads were broken and falling off. The additional replaceable rubber pads perfectly solve this problem.
- Multifunctional magic arm. The two ends of the magic arm are respectively with 1/4" screw, you can use the 1/4" screw at one end to install LCD display/LED light/Video Vlog Rig and other equipment, or you can use the 2.16"super clamp to hold the PCB/hot air gun/hook/glass to soldering/welding/repairing etc. items.
The 19.7" super long magic arm can be rotated 360°, which can better meet your needs for length and various angles.
Due to the long-term use of the clamps, the rubber pads were broken and falling off. The additional 2Pcs replaceable rubber pads perfectly solve this problem.
The camera mounting clamp has 1/4"-20 and 3/8"-16 threads. It can open up to 2.16"/55mm, and the minimum is 0.6"/15mm.
The maximum load-bearing capacity of the clip is: 1KG /2.2 LB.
Multifunctional magic hand with 2.16" super clamp can be used for clamping welding products such as PCB/hot air gun/solder wire.
Multifunctional magic arm can be used for installing LCD display/LED light/Phone/Video Vlog Rig and other equipment.
Specification:
Main material: aluminum alloy + stainless steel
Magic arm length: 19.7in / 500mm
Camera mounting clip length: 2.16in / 55mm (max)
Metal table clamp length : 2.56in / 65mm (max)
NOTE: Loosening and tightening the wing nut of both articulating arms also loosens and tightens the swivels ends of the 1/4" thread. If you find the ends are unstable after the mount, please make sure the center knob is tightened. And ensure remove items of the end safely, please remember to support what ever is on the end when you loosen the wing nut.
Package Include:
- 1 x 19.7” Magic Arm
- 1 x 2.16” Camera Mount Clamp
- 1 x 2.56" Metal Clamp
- 2 x Replaceable Rubber Pads of Camera Mount Clamp
C S
Reviewed in the United States on March 14, 2025
Very sturdy, solid grip, stays where you put it. I use it to hold a high-powered flashlight while working at my desk. It is fantastic!
Customer
Reviewed in the United States on April 21, 2025
Works good however… it’s hard to get it to hold a heat gun. You have to spend a few minutes to get to to hold where you want it to
Claudia Diaz
Reviewed in the United States on February 20, 2024
Ordered twice and received damaged, clearly used products.Its good when new, but the bottom hinges don't lock super strong.
Aruss
Reviewed in the United States on February 12, 2024
Toolour Helping Hands was purchased to hold a hot air tool in place over PCB boards for certain assembly tasks and or rework purposes. The arms do not articulate very good and it took some time to get good angles to work with. It is decent and does the job but needs some improvements.
Ebrahim A.
Reviewed in the United States on July 12, 2023
It done the job well, but the hand should be movavle, and very disappointing is the wheel for the base also control the hand adjustment which is kind of strange , I hope that the base and the clamps each one have their own adjustment
Oni
Reviewed in the United States on September 23, 2022
I bought this for my wife so that it could hold her puff e-cig as she cannot press any buttons or hold items in her hands due to having rheumatoid. I attached it to the desk and have it holding the e-cig for her so that she can just lean forward and take her puffs, works great.
BruceK
Reviewed in the United States on December 1, 2022
Easy to use. Flexible and easy to orient on 3 axis.
Ryan Cyr
Reviewed in the United States on April 26, 2022
works well, we use it for holding things while welding, we have one with a magnet base and its much sturdier on a welding bench than the vice style one but the claw side is nice and strong and the joints can lock and be very sturdy as well
Recommended Products