Your cart is empty.
Your cart is empty.TYC cooling fan assemblies are designed to be comparable to OE in performance, validated through air volume test that simulates cooling ability. Each unit is an assembly with motor, fan, and shroud to simplify replacement compared to working on individual components. To ensure durability, each cooling fan design are run through tests like : corrosion resistance, endurance, moisture, torsion and, vibration. Each unit goes through a quick power-on test before leaving the factory to ensure functionality.
Gombo
Reviewed in the United States on August 1, 2024
Seems to work, and much quieter than what it replaced
Dirty
Reviewed in the United States on January 4, 2024
Both fans are dead on time and flawless fit perfect would definitely order again thanks
B B.
Reviewed in Canada on September 1, 2023
This aftermarket fan was a perfect replacement & actually very reasonably priced. Checking used parts at auto wreckers was not any less expensive.Why but an old one ready to burn out when you can buy a new one of good quality.
Steve in MN
Reviewed in the United States on August 21, 2023
Perfect fit in my 2005 honda cr-v.
Kevin
Reviewed in the United States on September 27, 2022
I WANTED A TYC FAN ASSEMBLY BUT WHEN I GOT IT I"VE PURCHASED A NUMBER OF TYC FAN ASSEMBLIES> THIS ONE DID NOT HAVE THE TYC STICKER THAT THEY ALL HAVE> INSTEAD IT SAID CONTINENTAL> I RETURNED IT>
Jess in California 💖
Reviewed in the United States on December 1, 2020
Fantastic deal on a new engine cooling fan. Fit my 2005 Honda CR-V, although the hood latch hardware had to be removed in order to get the fan installed in place.Just be aware that you will receive the FAN ONLY, it does not come with the special plastic zip ties & metal coil springs needed to secure the fan in place. You will need to order those separately.
Matt A.
Reviewed in the United States on November 22, 2018
Like another review said, this fan is a fraction of an inch deeper so I did have to remove the top radiator hose from the radiator. But it added almost no time. This was an easy fix and now it works great again!
D Lott
Reviewed in the United States on August 7, 2016
Great secure packaging. This was for a 2004 Honda CRV LX where I was replacing the radiator fan (driver side) as well as the condenser (passenger side) fans. A YouTube video on a 2002 CRV indicated that if the condenser fan was removed first the radiator fan could be slipped over to the side (where the condenser fan was) and pulled out that way. That was right for the original fans although it was a bit of a tug to get the radiator fan out around the hood latch support. I found that this fan was 1/4" deeper on the back of the motor housing than the replacement and there was no way it was going back in the same way. So I ended up removing the battery so I could relocate the air intake housing and just dropped it straight down. I had checked both fans before installing with a 12 volt external source. Both have been purring along and keeping the engine cool and AC cold even with our mid-90s heat wave.
Jason_in_Gilbert
Reviewed in the United States on March 15, 2016
I installed both sides because you know the moment that one goes bad the other will too and as long as your in there why not replace both of them. It took us about 2 hour and we watched the Youtube video and did it right. It is a little loader but you don't hear if in the honda element 2007 over the music or talk raid. Also I just did a 400 mile roadtrip across the Arizona desert with no cooling issues. Save yourself a later swap out of the hardware and do them both. Here is the other one http://www.amazon.com/gp/product/B000IYR7HW?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00Good Luck out there.
Recommended Products
$70.01
$ 29 .99 $29.99
$214.95
$ 95 .99 $95.99