Your cart is empty.
Your cart is empty.Product Description
Light Curing Putty,UV-cured, sandable & paintable—works on granite, ceramic, wood & more! Perfect models in minutes.
FUNCRECOL UV glue can fix your defect quickly ,with clear/transparent material, makes the results perfect. it can fix your countertops, tiles or other surfaces.
Low Heating Value
Maximum heating temperature
52.7°C（126.9°F）
High Temperature Resistance
Under 100°C environment, it will
not crack, deform or soften.
Deep Curing Depth
This putty can effectively cure
depths of up to 10mm.
Multipurpose
UV-curing putty can be used in
many fields such as decoration,
furniture repair, automotive, and
figurine modeling.
Bill_6400
Reviewed in the United States on May 10, 2025
I've been doing both resin and filament 3d printing for a few years. No matter how good your printer or file is you will run into times that you need to fill gaps, cracks, holes, or defects. Most of the things I use tend to be a little messy or take a while to cure. This UV putty is easy and not messy. I use a small tool to put it on and shape it tonwhat I need or even use my fingers to mold. Then I use a UV flash light to cure, and it's done.I definitely recomend this.
Steven
Reviewed in the United States on March 24, 2025
This stuff is great. I use it to fill in gaps or small holes on my resin 3D prints. I love how you can push it out in small quantities. You definitely can't fill large holes with this as it's too soft, but for cracks and small holes, it works great. You get a small amount, but you're not really using much of it. This price isn't that bad as it's under $10. It does have to be cured with UV light, and can be worked with in layers. The ease of use this brings to the table for me is great. I squeezer a little out and use my silicone sculpt tool to apply it. I recommend this if you need to fill small gaps. Keep in my that this is resin and you do need to where PPE when working with it. That's really the only con in my opinion.
mnq
Reviewed in the United States on March 24, 2025
I wish it was a little thinner and more pliable. But it cures hard a rock. You could take a belt sander to it and still need to chisel it off. So thin it as much as you can, squish it, squish it real good…
Daniel Cabanaw
Reviewed in Canada on January 11, 2025
This putty is great for filling drain holes and larger gaps in in resin 3D printed models, but is not great for smaller details or holes such as pock marks left by supports. It's a bit grainy and difficult to add sculpt back in finer details. It sticks too much to tools, even sillcone tools (Colour Shaper). Still useful to have around but not a go to product I was hoping it would be, especially for the price.
Michael A
Reviewed in the United States on April 8, 2025
Easy to use and works as described. It is a little pricey but I did not want that to distract from the product. Easy to apply (I used silicone sculpting tools) and fast curing with a UV spot light makes quick patches. I am not sure how big a gap it will fill, but for small seams it works well.
Todd Wardwell
Reviewed in the United States on April 5, 2025
This stuff is awesome. I used it in filling seams on model kits. It has the consistency of thick vasoline. For very small fills I use some of my 3d printer resin but that stuff is messy and runs risking you messing up details. You can sculpt this stuff where you want it and within a minute be putting paint/primer over it with no issues.
Verified Purchaser
Reviewed in the United States on April 5, 2025
Good putty for my model building needs.
Gamma Unicorn
Reviewed in the United States on April 2, 2025
Worked exactly as I needed to fill the gap on a broken cup (display, I didn't try to see if it was water tight)
dilon simpkin
Reviewed in the United States on November 1, 2024
I do a lot of 3d printing and filling drain holes with other mediums can be taxing. This putty with a uv light has made this process easier. Great value for price. Versatile product. The durability is fantastic when cured. A great purchase if you are into 3d printing or resin crafting.
Recommended Products