Shopping Cart

Your cart is empty.

Your cart is empty.

Wall Mount Fan Oscillating,Industrial Heavy Duty Metal 3 Speed Fan,20 Inch High Velocity Adjustable Tilt,Use for Garage, Shop,Warehouse, Patio, Factory and Homes.

Free shipping on orders over $29.99

$119.98

$ 52 .99 $52.99

In Stock

1.Color:Yellow


About this item

  • Flexible Head Oscillation: Our wall mount fan are equipped with 120 degrees horizontally oscillation,and 60 degrees of vertical tilt manual adjustment.Oscillating fan can be adapted to your airflow needs from different angles.The air in the corner of the room can be effectively pushed to achieve rapid cooling.
  • 3 Speeds Settings: We set wall mount fan 3 wind speeds, low, medium and high, in order to meet your needs for cooling in different application scenarios.The maximum wind is up to 7100 CFM,which can provide a large amount of airflow for large area ventilation.
  • Upgrade Motor: We use copper wire motor compared with the general aluminum motor is more durable。Pure copper wire is less resistive than aluminum wire, and the current becomes smoother, which effectively improves heat generation and thus becomes more energy efficient, and the noise generated with the resistance is also reduced.This greatly enhances the comfort level when using.
  • Secured Scientific Use: We specially adopt the design of 3 fan blades, which can make the motor load in a stable state, not the more fan blades the better. In addition, the aluminum fan blade is hard, so the wind is stable and strong, and not easy to deformation durable.The grille has a painting process on the surface, which makes the fan not easy to rust. The dense grid spacing makes it difficult for fingers to slide in, reducing potential safety hazards .
  • Durable Steel Neckt: The wall mounted fans can be installed on the wall to save more space.Fitted with durable steel neck, metal rod soldered securely, package includes expansion screws and fittings for mounting.The industrial high velocity fan is not only suitable for factory, but also for garage,outdoor patios, shop, commercial,warehouse, hotel and anywhere else you need a fan.



Product Description

Wall Mount Fan 20 Inch Wall Fan with 3 Blades Oscillating Quiet Fan with Remote for Home
Oscillating Wall Mount Fan with Remote Control
 20 Inch Wall Fan High Velocity Heavy Duty Metal Wall Mount Fan for Industrial
20 Inch High Velocity Metal Wall Fan 4650CFM Wall Mounted Fan Heavy Duty
Wall Mount Fan 20In Oscillating Wall Fan 3-Speed High Velocity Industrial Fan for Commercial
commercial fan gazebo fan gym fan industrial fan greenhouse fan

Tilt Angle Knob

The Angle of the fan can be adjusted flexibly, allowing a wider range of air to be blown, making it cooler

oscillating wall mount fan wall mount fan with remote wall mounted fan indoor high velocity fans

Screw Connection

The buckle design makes installation faster and easier, which also means easier disassembly and no trouble cleaning the fan

24 Inch Pro High Velocity Corded Electric Classic Oscillating Wall Mount Fan with 3 Speed Settings

Aluminum Blades

Aluminum blades are corrosion-resistant and can extend the life of goods

Wall Mount Fan For Industrial, Commercial

Control Panel

Sturdy 3 aluminum blades with 3 speed adjustment to meet your different needs of wind.


Leyanis majuan
Reviewed in the United States on March 17, 2025
Amazing
Dean Abeln
Reviewed in the United States on September 18, 2024
This is a very nice and fast fan both in install and air movement. My only wish is that the speed and swing controller was closer to the plug in since I have a 14 foot side wall in my garage, as you see I either need to lower the fan or use a ladder. Unit works fine so that is reason for 5 stars.
V3
Reviewed in the United States on August 22, 2024
Great garage fan! Modern look. Good quality materials. Only weird thing is that on/off is a function of the fan speed and oscillation is separate button. In other words, the fan will continue to oscillate without the fan blade spinning if you don't remember to turn it off in two places. No big deal though. Happy with purchase.
Kat
Reviewed in the United States on May 8, 2024
I've had this fan up on the wall of my covered lanai for 7 months now. I've only turned it on twice. It literally fell off the bracket it was attached to. The piece on the fan that attaches to the bracket crumbled. It's in the corner out of the elements. Luckily no one was sitting under it at the time and it didn't damage anything. Needless to say, I'm very disappointed in the quality of the fan. While it was a decent price, I expect it to last longer than seven months. HAVING SAID ALL THAT I WAS PLEASANTLY SURPRISED THAT WHEN I CONTACTED THE SELLER THEY GAVE ME A FULL REFUND, SO I INCREASED THEIR REVIEW TO 4 STARS!
James A Doney
Reviewed in the United States on April 7, 2024
Overall, I like the fan. It is quiet and puts out a significant breeze. My only complaint is the cheap installation hardware. It only comes with drywall mounts. There are no screws or hardware to screw into a stud. Secondly, the mounting expansion screws do not expand. Two of the three screws, I installed never expanded in the unit would not stay mounted to the wall. If you’re lucky enough to get hardware that actually works, this is a great purchase. Otherwise, it’s going to require a trip to Home Depot for some better quality hardware.
Johnny W. Giles
Reviewed in the United States on July 25, 2023
The media could not be loaded.
DSM
Reviewed in the United States on November 3, 2023
This initial review cover's the > Bestronair Wall Mount Fan Oscillating,Industrial Heavy-Duty Metal 3 Speed Fan, 22 Inch.2024 WARNING > Safety Hazard - Read detail's down below.Bought this unit to replace a different Outdoor, Wall Mount Fan, Oscillating, Industrial, Metal 3 Speed Fan, in Stainless Steel, in our back Lanai & cedar deck, that had rusted beyond repair, after about 7 years..By comparison, the Other fan was definitively an Industrial, Heavy-Duty, in Stainless Steel, solid / heavier, and, with a modern, sleek, stainless steel appearance, and like many other dated items on AMZ, no longer available. This Bestronair Wall Mount Fan, is black on black finish, and was just installed a week ago.Pro's - nothing to report, as it's new.Con's - here are some obvious things to point out.1. Caution > The fan metal cages are Not Industrial, Heavy-Duty. Metal. Here's why, although it was well-packaged without any obvious box damage, the fan metal cages were Bent outward, losing the metal cage curves, that allow the 2 cages to FIT together.2. This was not obvious upon opening the box, but wasn't noticed until it was being assembled on the wall. Had to Bend back in place a pie-section, by hand, in order for the retaining clips to close.The metal cage's are SOFT metal, so if by chance the front metal cage shakes the closed retaining flimsy clips, via operating vibration and it hit's the floor, you will have a Problem.3. Caution > Long, S-Curved fan support - it has a WEIRD long, S-curved fan support that fit's into the Wall bracket.4. Wall bracket - appears to be the ONLY thing made of solid steel, but, the included metal screws are a JOKE, based on the fan's Weight x the Law of Gravity. They are worthless, so use your own bolts.5. Caution > Fan Control Design - must have been designed by a Panda, that was a humanities pre-college major. THERE is a reason why you don't see a separate Large Photo on their landing product AMZ page. It has 1 electric cord, about 9-inches long that exit's the Left side of the fan, and, attaches to the TOP of the control. The 2nd electric cord, exit's the TOP of the control (Not the Bottom), almost buddy-taped to the 1st cord on Top.This Bad design automatically creates two (2) big Restriction's - The placement of the Fan-to-the-outlet, and the placement of the Control, when the fan is ... wait for it ... Oscillating 180 degree's..Recommend that before mounting the fan, measure the length of the A/C cord to the nearest outlet, and Add about 8 to 10 inches. Same principle with the Manual Control, but with the fan mounted, you will have to figure out like I did about where to install the control.Other than these Con's ... the fan does work ... for now. TBC.Photo's- will try to get some and post as 'proof-of-life'.... Update June 2024 > Safety Hazard Issue ! Read Carefully.Don't waste your time ... it's cheap junk. The "Wire Cage" is very soft metal, arrived with the front face piece that was bent, and so it is NOT stainless-steel like the one it replaced.1st main Issue - furthermore, the Fan's Main Support Bracket (cheap plastic) broke last week, and the fan came crashing down ... luckily no one was around, but we did hear a loud crash, and went over next door and saw the mess.2nd issue - is the giant deficit in engineering the "Speed control unit" which is extremely awkward to set-up. I had to create a separate Support for it, so it could be placed in a location where the cord could actually reach the wall plug-in.Spend an extra $50 to $100 bucks and get a Quality Wall Mount Fan for either Indoors or Outdoors.For Indoors - recommend Lasko wall fan's as they are affordable, reliable, easy to mount and easy to take apart to clean. Some are made with a Remote control, which is cool (pun intended). DSMDSM.
c'est la vie🎉😘
Reviewed in the United States on April 5, 2023
First off impressed with the build quality of this fan, heavy-duty industrial metal construction, the adjustable height feature is extremely convenient.The 20-inch size is also appropriate for use in larger rooms. The oscillation feature is another highlight of this fan it ensures that the airflow is evenly distributed throughout the room, providing a comfortable and refreshing experience.The three-speed settings are also convenient and allow you to adjust the airflow to your liking.Overall, this pedestal fan is a great choice for those looking for a heavy-duty and durable fan. Its adjustable, oscillation feature, and three-speed settings make it a versatile choice for a variety of settings.
Recommended Products