Your cart is empty.
Your cart is empty.Product Description
Compatible
Compatible with LG
WT4870CW, WT1101CW, WT1101CW/00, WT1150CW/00, WT1201CV, WT1201CW, WT1301CW/00, WT1501CW, WT1501CW/00, WT1701CV, WT1701CV/00, WT1701CV/01, WT1701CW, WT1701CW/00, WT1801HVA, WT1801HWA, WT1901CK, WT1901CW, WT4970CW, WT5001CW, WT5001CW/00, WT5070CW, WT5070CW/00, WT5101HV, WT5101HV/00, WT5101HW, WT5101HW/00, WT5170HV, WT5170HW, WT5270CW, WT5480CW, WT5480CW/00, WT5680HVA, WT5680HVA/00, WT5680HVA/01, WT5680HWA, WT6001HV, WT6001HW, WT7400CW/00, WT7600HWA, WT7800CV/00, WT7880HWA/00, WT7900HBA/00, WT7900HBA/04, WT7900HBA/05.,etc.
Compatible with Kenmore
79629002000, 79629002010, 79629272000, 79629272001, 79629272010, 79629272900, 79629272901, 79629278000, 79629278001, 79629278010, 79629278900, 79629472000, 79629478000, 79631402410, 79631403410, 79631412310, 79631412410, 79631422410, 79631423410, 79631423411, 79631462410, 79631462411, 79631463410, 79631463411, 79631512210, 79631512211, 79631513210, 79631513211, 79631513310, 79631522210, 79631522211, 79631523210, 79631523211, 79631622310, 79631623310,etc.
● AGZ72909711 washplate pulsator compatible with LG ,Kenmore.
● Replace the original parts: AGZ72909702, AGZ72909703, AGZ72909706, AGZ72909713, AGZ73050601, etc.
● AGZ72909711 Washer Plate Washer Part is Suitable for Some Top Load Washers and is Properly Secured to the Bottom of The Drum to Solve the Problem of Repeated Falling Off Due to Worn Splines on the Original.
Package Included
- 1* AGZ72909711 Washplate Pulsator
- 1* Screw
This washer washplate using safe and sanitary materials. The surface is made of high quality stainless steel and the back is made of high quality ABS plastic, it has a long service life.
This washplate pulsator assembly Size is 18 inches (diameter) This washer washplate looks very similar to other models of washer washplate. Please check the size of your washer washplate and whether the model is compatible before you buy.
AGZ72909711 washplate pulsator assembly strictly installed OEM standard manufacturing, with good compatibility.
adam manring
Reviewed in the United States on January 24, 2025
Agitator came a day late. Then I put it in, tightened it down and ran a "tub clean" cycle when I noticed a scrub sound on time as it went around. Stopped machine, let it drain, removed the agitator plate and saw a gauge on the side of it. Looked at the bottom and saw it was out of round and not completely up against the plastic bottom piece around the edge. Returned for a refund. Don't waste your time!
Kirk holliday
Reviewed in the United States on March 6, 2024
Bolt did not have locktite on it. You should always locktite the bolt or it will come loose when the agitator is moving back and forth. Finish looks just like the original down to the plastic rings that are unseen.
GojiraFan
Reviewed in Canada on February 6, 2024
Product aesthetic does not quite match the original, but close enough. Easy to install and has held up so far, the internal teeth on the shaft look more durable than the oem...time will tell. Price for these is a bit crazy but they know we need them so we get a bit robbed ya?
Patrick
Reviewed in the United States on December 4, 2024
Good Price and agitator very close to original style I have on my LG washer. The agitator broke off when a dime got caught in the slot that goes around the agitator. Note: The LG has10mm head on bolt that holds agitator in place.
Bryan
Reviewed in the United States on December 22, 2024
works like a charm!
Kindle Customer
Reviewed in the United States on April 2, 2024
Easy to install and works perfectly,
Rachel
Reviewed in the United States on July 14, 2023
The washplate that came with my washing machine kept popping off during the wash. This is made of nice material, fits well (read the description carefully to make sure this fits your model), and was very easy to replace. Machine was up and running again in under 5 minutes from attempting to install the new washplate. Very grateful for the replacement part and for all the YouTube videos that made installing it fool-proof.
Dave
Reviewed in the United States on June 24, 2023
Our plate ribs rubbed raw and we were unable to do any laundry. I found the part of Amazon, an OEM part ($160ish) and knew I could go cheaper. This part fit the bill.The only thing I needed to do was add some thread lock on the bolt, as it loosened after the first load.
Nate
Reviewed in the United States on May 8, 2023
Our 10 year Kenmore washer stopped working properly and the pulsator piece had come loose and was not working anymore and making strange noises. After a little research it looked like we could just replace this piece and hopefully continuing using our washer which we liked. This pulsator said it was compatible with our model and it was like a 5 minute replace and install procedure. Very easy and it works perfect so far. Glad we didn't have to get a new a whole new washer. Will update over time if durability issues come up.
Nick V
Reviewed in Canada on October 21, 2023
Washer was slowly starting to get louder until one day after a cycle I opened the machine to find my clothes not very clean and the agitator had come loose. Put it back on again and same thing happened.. quick YouTube search showed many people with same problem and replacing it with a new one being the solution. The plastic groves that go onto the metal motor spline strip over time and that's what causes the problem.. long story short new one fixed the issue for me.. you will also need to buy or have on hand some blue lock tight for the new bolt that comes with it as it doesn't come with any on the threads.
Recommended Products