Your cart is empty.
Your cart is empty. Features:
1.Epoxy Mixing Nozzle is compatible with most standard Type-A or Type-S 50ml Dual-Barrel epoxy and adhesive cartridges.
2.Made of PE material in clear shell, the spiral interior static of mixing nozzle mixes two-part components to the ideal ratio.
3.Resin Mixing Tip offers unique adhesive solutions for bonding a range of substrates including metals, thermoplastics, and thermoset composites.
4.Combining convenience and performance, the Mixing Nozzles mix two-part adhesives, sealers and foams to the perfect ratio every time.
5.Mixing Nozzle Tip is widely used as epoxy adhesive gun applicator and allow you to apply mixed epoxy directly where you need it from the syringe.
6.Widely used in the mixing of various two-component adhesives and fillers (including epoxy resin, silicone, polyurethane, PU, sunlight and other multi-component mixing), or products with large disparity in comparison ratio, large flow requirements.
7.Reusable, simply soak it in alcohol, thinners or other solvents after the work then it can be used in the next time.
Specifications:
Model：MA5.74-17
Mixing Ratios: 1: 1 / 2: 1
Volume: 1.3ml
Material : Plastic
Color : Clear White, Green
Length: 105mm/ 4.13"
Bell mouth inner dia.: 7mm/ 0.27"
Tip Output Diameter: 1.5mm/ 0.059"
Tube diameter: 7.5mm/ 0.3"
Package Content: 50 x Dynamic Mixing Nozzle
Instructions:
1.Load a cartridge into the glue applicator, attach a mixing tip, squeeze the trigger to advance the plunger, and out comes premixed epoxy, which you can use to fill voids, cracks and holes with ease or to put just the right amount where you need it for repairs.
2.Reuse a partially empty cartridge by removing the tip and replacing the cap to preserve the remaining glue for another day,or simply toss an empty cartridge.
3.Replace with a new cartridge and tip and keep gluing.
Miguel Hurtado
Reviewed in the United States on May 6, 2023
50 for that price is a good deal
Tom McGlinch
Reviewed in the United States on March 9, 2023
At first try these didn't seem to fit at all on two different cartridges that other tips fit just fine on. I was going to return these but since my normal supplier doesn't have any available I decided to try them again, I found that they will work but you have to force them on using pliers to assist. I'll keep these but replace them when better ones become available.
Customer
Reviewed in the United States on June 2, 2020
They do not fit on the standard tubes for epoxy (instant).
Shane
Reviewed in the United States on January 21, 2020
These do work for the 50ml 3m two part adhesives and epoxies however the real 3m static tips are different design and allow to mix at a better rate allowing product to cure in 20 seconds versus 1-2 minutes.
Christopher J. Poletto
Reviewed in the United States on November 1, 2019
These worked just as expected. They go on easily and mixed my silicones without adding bubbles. The tips were easy to cut to desired shape. overall, very happy with these.
Customer
Reviewed in the United States on April 14, 2019
Good
Recommended Products
