Your cart is empty.
Your cart is empty. 10Pieces 6mm Professional Carbide Tip Drill Bit For Ceramic/ Tile /Marble/ Mirror Glass Cut Tool Set Hole Saw Alloy Specifications:
Material: Alloy
Color: Silver
Drill Type: Counterbore
Shank Shape:Round
Length: 6.8cm
Drill Diameter: 6mm
Weight: 0.094kg
Package Size: 9 x 2.2 x 2.2cm / 3.54 x 0.87 x 0.87inch (L x W x H)
Quantity: 10PCS
Package Included: 10Pcs 6mm Alloy Spear Head Drill Bits
Note:
- Never allow your drill bit to overheat, take small breaks to allow it to cool by dipping it in cold water.
- Drilling holes without water will cause excessive heat generated during the drilling process and may cause the bit to become blunt & lead to poor drilling performance.
- The hardness of the material & the operator determine the overall performance.
- Please pay attention to safety during using!
- Do not apply too much pressure as your tile/glass will break - just let the drill do the work.
- Use rotary action only not hammer action wear safety glasses.
- Please refer to the measurement. Tiny measuring errors are allowable within normal range.
- There might be a little color difference due to the monitor, camera or other factors, please refer to the physical item.
Charles R.
Reviewed in the United States on May 6, 2024
Works on high quality ceramic tiles that a standard diamond bit hardly touches
Neil Eisenwasser
Reviewed in the United States on November 14, 2024
The last drillbits were not that good not what I expected. They did not cut through glass like they were supposed to so I had to return it.
Luis
Reviewed in the United States on October 22, 2023
I use these for my business, and they work great. Just like any bit, keep them cool with water, and they'll last.
Mike A
Reviewed in the United States on May 16, 2020
The first two bits I tried got so hot they melted out the 'brazing' compound holding the cutting tips. The second two bits dulled really fast (1 min or less), but didn't fall apart.With plenty of cooling water spray, and letting the bit cut slower, they got the job done. I used 6 bits total for 12 holes in wall tile. I bought them for only one job, and they got it done. I would not buy if I needed dependable drill bits for hard use.
JC Customer
Reviewed in the United States on February 18, 2020
I need to drill into bathroom tile. I had two tile bits that I tried to use for over 30 minutes, but I could only get the holes drilled halfway. I looked online at the local big box store and they wanted $5 for one tile drill bit. Rather than drive to store I looked on Amazon Prime and had these bits delivered the next day. Within two minutes I had all the holes drilled perfectly. With 10 tile bits, I will probably never have to buy another one.
MR
Reviewed in the United States on January 5, 2020
I didn’t think these would be any good, still skeptical when I received them, but to my surprise, they worked very very well. I’ve cut holes in 3 tequila bottles (for lamps) without any difficulty and I’m still on the first drill bit.
Duffecker
Reviewed in the United States on December 18, 2019
Dull, and soft. I'm constantly going through drill bits as an owner of a tile business. I've tried most of the bits on amazon ,and these are the second worst so far. Only behind a coring type bit with no clean out hole. I prefer the bits sold with an orange tip. I drill mostly porcelain tile for what worth.
PC Pam
Reviewed in the United States on December 10, 2019
I bought these for crafting. I have used them on ceramic tile, cement, glass, terra cotta. Work great. Best value
Recommended Products
